Purplle · 🇮🇳 India

Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm

34 ingredients
What's in it

Below is every ingredient in Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
2 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm fungal-acne safe?
Based on its listed ingredients, Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm contains 2 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl Citrate/Lactate/Linoleate/Oleate, Polysorbate 20. If you are fungal-acne prone, you may want to avoid these.
Does Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm.
Will Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Dot And Key Vitamin C E Super Bright Sunscreen Spf 50 Pa 30 Gm safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Ethylhexyl Methoxycinnamate
UV filter (UVB sunscreen)

Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.

Butyl Methoxydibenzoylmethane
UV filter (UVA sunscreen)

Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.

Benzophenone-3
UV filter (sunscreen agent)

Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
UV filter (broad-spectrum)

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Tocopheryl Acetate
Antioxidant

Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Contact irritation or mild stingingUncommonTransient skin irritation, especially on sensitive or compromised skin.
Allergic contact dermatitisRareSensitization reported but relatively infrequent compared with other UV filters.
Photoallergic contact dermatitisRareReaction triggered by combined exposure to the ingredient and sunlight.
Potential endocrine/estrogenic activityVery rareSuggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain.
Contact allergic reaction (allergic contact dermatitis)RareAvobenzone is a recognized but uncommon cause of sunscreen allergy.
Photoallergic or photocontact dermatitisRareReactions triggered or worsened by sun exposure have been reported.
Skin irritation, redness, or stingingUncommonMild transient irritation may occur, particularly on sensitive or broken skin.
Eye irritationUncommonCan cause stinging if the product migrates into the eyes.
Contact and photocontact allergic dermatitisUncommonOne of the more frequently reported photoallergens among UV filters, causing rash, redness, or itching, sometimes only upon sun exposure.
Skin irritation or stingingUncommonMild transient irritation, more likely on sensitive skin or near the eyes.
Systemic absorptionCommonDetectable in blood and urine after topical use; clinical significance is uncertain and under ongoing study.
Possible endocrine activityRareWeak hormonal effects observed in laboratory and animal studies; relevance to humans at typical exposure remains unproven.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Ethylhexyl Methoxycinnamate Key active
UV filter (UVB sunscreen)
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane Key active
UV filter (UVA sunscreen)
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Benzophenone-3 Key active
UV filter (sunscreen agent)
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
Phospholipids
Emollient / skin-conditioning agent and liposome-forming emulsifier
Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives.
1,3 Butylene Glycol
Humectant / solvent
1,3-Butylene glycol is a small diol used in skincare as a humectant, solvent, and viscosity modifier that helps retain moisture and improve product texture. It also has mild antimicrobial properties that can aid preservation.
Isododecane
Emollient/solvent
Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens.
Dicaprylyl Carbonate
Emollient / texture enhancer
Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Caprylic/Capric Triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Glyceryl Citrate/Lactate/Linoleate/Oleate
Emulsifier / emollient
Glyceryl Citrate/Lactate/Linoleate/Oleate is a glycerin-derived ester blend used as a non-ionic oil-in-water emulsifier and skin-conditioning agent in creams and lotions. It helps stabilize emulsions while imparting a smooth, moisturizing feel and supporting skin barrier function.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active
UV filter (broad-spectrum)
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Propylene Glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Polyacrylate-13
Rheology modifier / thickener
Polyacrylate-13 is a synthetic acrylate copolymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create stable gels and emulsions and improves product texture without contributing to active treatment effects.
Polyisobutene
Emollient/film-former
Polyisobutene is a synthetic hydrocarbon polymer used in cosmetics as an emollient, thickener, and film-forming agent that imparts smooth texture, adhesion, and improved spreadability. It is commonly found in long-wear makeup, lip products, and sunscreens to enhance water resistance and product longevity.
Polysorbate 20
Emulsifier / solubilizer
Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active.
Polyacrylate Crosspolymer-6
Film-forming/sensory-enhancing rheology modifier
Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Silica
Absorbent/texturizer
Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin.
Disodium EDTA
Chelating agent
Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Ascorbyl Glucoside Key active
Antioxidant / vitamin C derivative
Ascorbyl Glucoside is a stable, water-soluble vitamin C derivative that is enzymatically converted to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and skin brightening. It is generally considered milder and more stable than pure L-ascorbic acid.
Citrus Sinensis Fruit Extract Key active
Antioxidant / skin conditioning
Citrus Sinensis (sweet orange) fruit extract is derived from oranges and is used in skincare for its vitamin C, flavonoid, and antioxidant content, providing skin-conditioning and brightening support. It also contributes fragrance and may serve as a mild astringent in formulations.
Terminalia Ferdinandiana Fruit Extract Key active
Antioxidant
Terminalia Ferdinandiana (Kakadu plum) fruit extract is an exceptionally rich natural source of vitamin C (ascorbic acid) along with ellagic and gallic acids, valued in skincare for antioxidant protection and potential brightening effects. It helps neutralize free radicals and may support collagen-related processes when stabilized in formulations.
Fructooligosaccharides Key active
Prebiotic / humectant
Fructooligosaccharides are plant-derived prebiotic carbohydrates used in skincare to selectively nourish beneficial skin microbiota and support skin barrier health. They also provide mild humectant and soothing properties in topical formulations.
Beta Vulgaris Root Extract
Antioxidant / skin-conditioning
Beta Vulgaris (beet) root extract is a plant-derived ingredient rich in betalains, sugars, and antioxidants, used in skincare for its conditioning, humectant, and free-radical-scavenging properties. It is generally regarded as mild and well-tolerated in topical formulations.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Octenidine HCl Key active
Antiseptic/antimicrobial
Octenidine HCl is a cationic surfactant antiseptic effective against bacteria, fungi, and some viruses, used in skin and wound disinfection and as a preservative in topical formulations. It binds to negatively charged microbial cell membranes, disrupting their integrity.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →