Below is every ingredient in Pond S Light Moisturiser 300Ml 15 14 14 16 10 15 60 explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild skin irritation | Uncommon | More likely at higher concentrations or on sensitive skin. |
| Contact allergy / dermatitis | Rare | Allergic sensitization is infrequently reported. |
| Comedogenicity / clogged pores | Uncommon | May contribute to pore blockage in acne-prone individuals. |
| Allergic contact dermatitis | Rare | Sensitization is infrequent; fatty acids are considered low allergenicity. |
| Comedogenicity / pore clogging | Uncommon | May contribute to clogged pores in acne-prone individuals depending on concentration and formulation. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
| Comedogenicity (acne/clogged pores) | Common | Considered a moderately to highly comedogenic ingredient; may worsen acne or cause breakouts in acne-prone individuals. |
| Skin irritation | Uncommon | Mild irritation or stinging reported, particularly on compromised or sensitive skin. |
| Folliculitis | Rare | Follicular irritation linked to its occlusive and pore-clogging tendency. |
| Comedogenic reactions (clogged pores/acne) | Uncommon | Cosmetic-grade mineral oil is generally low on the comedogenic scale; reports vary and largely depend on formulation and individual skin type. |
| Contact irritation or skin sensitivity | Rare | Mineral oil is largely inert; irritation is uncommon and often attributable to other formulation components. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Palmitic Acid Emollient / surfactant | Palmitic acid is a saturated fatty acid commonly used in skincare as an emollient, emulsifier, and cleansing agent that helps soften skin and stabilize formulations. It is also a natural component of the skin's lipid barrier. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Isopropyl Myristate Emollient / skin-conditioning agent | Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Mineral Oil Occlusive emollient | Mineral oil is a highly refined, inert petroleum-derived hydrocarbon used in skincare as an occlusive agent that forms a barrier on the skin to reduce transepidermal water loss. It is widely used in moisturizers, ointments, and baby products due to its stability and low reactivity. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Triethanolamine pH adjuster / emulsifier | Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Methyl Paraben Preservative | Methylparaben is a widely used antimicrobial preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at low concentrations as a base/formulation ingredient rather than a treatment active. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Alumina Abrasive/opacifying agent | Alumina (aluminum oxide) is a fine, hard mineral powder used in skincare and cosmetics primarily as a physical exfoliant in microdermabrasion products and as a bulking, opacifying, or anticaking agent in formulations. It is largely inert and not absorbed through intact skin. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Propyl Paraben Preservative | Propyl paraben is a synthetic ester of para-hydroxybenzoic acid used to prevent microbial growth in cosmetic and personal care formulations. It is effective against fungi and bacteria and is typically used at low concentrations. |
| Glutamic Acid Humectant / amino acid | Glutamic acid is a naturally occurring amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a pH adjuster and in some formulations to enhance moisturization. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Tocopherol Acetate Key active Antioxidant / vitamin E derivative | Tocopherol acetate (vitamin E acetate) is a stable, esterified form of vitamin E used as an antioxidant and skin-conditioning agent in cosmetic formulations. It can be converted to active tocopherol in the skin and helps protect formulations and skin lipids from oxidative damage. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Sodium Ascorbyl Phosphate Key active Vitamin C derivative / antioxidant | Sodium Ascorbyl Phosphate is a stable, water-soluble derivative of vitamin C (ascorbic acid) that is converted to active ascorbic acid in the skin. It provides antioxidant protection, supports collagen synthesis, and is also studied for its brightening and anti-acne (antibacterial) effects. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Perfume Fragrance | Perfume (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a desired scent or to mask the base odor of other ingredients. It serves a sensory and formulation role rather than a skin-treating function. |
| Alpha-Isomethyl Ionone Fragrance ingredient | Alpha-Isomethyl Ionone is a synthetic fragrance compound with a sweet, violet-like floral scent used to impart or enhance aroma in cosmetic and skincare formulations. It has no therapeutic skin benefit and serves purely an olfactory/sensory role. |
| Benzyl Alcohol Preservative / solvent | Benzyl alcohol is an aromatic alcohol used primarily as a preservative and solvent in cosmetic formulations, and it also provides mild fragrance and viscosity-reducing properties. It is approved for use as a preservative at concentrations up to about 1% in leave-on and rinse-off products. |
| Citronellol Fragrance ingredient | Citronellol is a naturally occurring monoterpene alcohol used as a fragrance and flavoring agent, providing a rose-like, citrusy scent in cosmetics and personal care products. It is found in essential oils such as rose, geranium, and citronella. |
| Geraniol Fragrance/aroma compound | Geraniol is a naturally occurring terpene alcohol used in cosmetics primarily as a fragrance ingredient and for its pleasant rose-like scent. It also has mild antioxidant and antimicrobial properties but is included mainly for olfactory rather than therapeutic purposes. |
| Hexyl Cinnamal Fragrance ingredient | Hexyl Cinnamal is a synthetic aromatic compound used as a fragrance and masking agent in cosmetic and skincare formulations, valued for its mild floral, jasmine-like scent. It is one of the 26 fragrance allergens required to be labeled in the EU. |
| Limonene Fragrance/solvent | Limonene is a naturally occurring monoterpene derived from citrus peel oils, commonly used as a fragrance component and solvent in cosmetic formulations. On exposure to air it oxidizes, forming compounds with greater sensitizing potential. |
| Linalool Fragrance/masking agent | Linalool is a naturally occurring terpene alcohol found in lavender, coriander, and many other plants, used in skincare primarily as a fragrance component. It readily oxidizes upon exposure to air, forming sensitizing hydroperoxides. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.