Thedermaco · 🇮🇳 India

1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml

12 ingredients
What's in it

Below is every ingredient in 1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 Fungal-acne safe
No known Malassezia triggers detected
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is 1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml fungal-acne safe?
Based on its listed ingredients, no known Malassezia (fungal-acne) triggers were detected in 1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml.
Does 1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of 1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml.
Will 1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is 1% Hyaluronic Moisturizing Sunscreen Body Lotion In-Vivo Tested - 200 ml safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Octocrylene
UV filter

Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.

Zinc Oxide
UV filter / skin protectant

Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Tocopherol
Antioxidant

Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Skin dryness or barrier disruption with excessive contactUncommonFrequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss.
Irritation from impurities or hard water mineralsRareReactions are attributed to contaminants, chlorine, or mineral content rather than water itself.
Contact dermatitis / skin irritationUncommonLocalized redness, itching, or stinging on application.
Photoallergic contact dermatitisRareReported particularly in adults, sometimes linked to prior ketoprofen sensitization.
Allergic contact dermatitisRareDocumented in patch-test studies, more often in children with atopic dermatitis.
Systemic absorptionCommonDetectable in blood after use; clinical significance unclear and not equated with harm.
Benzophenone formation over timeUncommonDegradation can yield trace benzophenone; relevance to skin health under study.
White cast / cosmetic residue on skinCommonNon-micronized particles can leave a visible white film, especially on darker skin tones.
Dryness or mild skin tightnessUncommonDue to its astringent nature, particularly in high concentrations.
Clogged pores / acne aggravationUncommonMore often attributed to occlusive base ingredients than to zinc oxide itself.
Contact irritation or stingingRareGenerally well tolerated; irritation often relates to other formulation components.
White cast on skinCommonCosmetic effect, more pronounced on deeper skin tones and with non-micronized grades.
Skin dryness or mild irritationUncommonUsually related to the overall formulation rather than the ingredient itself.
Contact dermatitis or allergic reactionRareTitanium dioxide is a recognized low-sensitizing ingredient; reactions are infrequent.
Comedogenicity / clogged poresRareCan occur in some individuals depending on coating and formulation base.
Inhalation-related respiratory concernVery rareRelevant only to loose powder/spray forms via inhalation, not topical leave-on use.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Octocrylene Key active
UV filter
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Zinc Oxide Key active
UV filter / skin protectant
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
PEG/PPG-18/18 Dimethicone
Silicone-based emulsifier/conditioning agent
PEG/PPG-18/18 Dimethicone is a water-dispersible silicone surfactant used to emulsify, stabilize, and impart a smooth, silky feel to skincare and cosmetic formulations. It functions primarily as an emulsifier and skin-conditioning agent rather than a therapeutic active.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Tocopherol Key active
Antioxidant
Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Methylisothiazolinone
Preservative
Methylisothiazolinone (MI) is a synthetic isothiazolinone preservative used in cosmetics and personal care products to prevent microbial growth. It is effective at low concentrations but is recognized as a significant contact allergen.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →