Below is every ingredient in 1% Hyaluronic Sunscreen Aqua Gel In Vivo Tested (ISO 24444:2019 Certified, CTRI/2025/02/080287) with SPF 50 & PA++++ - 125 g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage.
Phenylbenzimidazole Sulfonic Acid (Ensulizole) is a water-soluble organic UV filter that primarily absorbs UVB radiation, helping to prevent sunburn. Its water solubility makes it suitable for lighter, less greasy sunscreen and daily moisturizer formulations.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Mild skin irritation or stinging | Common | More likely at higher concentrations or on compromised/sensitive skin |
| Allergic contact dermatitis | Uncommon | Recognized contact allergen; confirmed via patch testing |
| Irritant contact dermatitis | Uncommon | Non-allergic irritation, often dose-dependent |
| Worsening of pre-existing eczema or barrier-impaired skin | Rare | Penetration-enhancing effect may increase reactivity |
| Systemic toxicity from topical use | Very rare | Reported mainly with extensive application on broken skin, especially in infants or burn patients |
| Contact allergic reaction (allergic contact dermatitis) | Rare | Avobenzone is a recognized but uncommon cause of sunscreen allergy. |
| Photoallergic or photocontact dermatitis | Rare | Reactions triggered or worsened by sun exposure have been reported. |
| Skin irritation, redness, or stinging | Uncommon | Mild transient irritation may occur, particularly on sensitive or broken skin. |
| Eye irritation | Uncommon | Can cause stinging if the product migrates into the eyes. |
| Contact irritation (mild stinging or redness) | Uncommon | Transient and typically mild, especially on sensitive skin. |
| Photoallergic reaction | Very rare | Rarely documented compared with some other UV filters. |
| Contact irritation | Uncommon | Mild stinging or redness, especially on sensitive or compromised skin. |
| Photoallergic/photocontact reactions | Rare | Reaction triggered upon UV exposure; documented occasionally. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Terephthalylidene Dicamphor Sulfonic Acid Key active UV filter (sunscreen) | Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage. |
| Phenylbenzimidazole Sulfonic Acid Key active UVB sunscreen filter | Phenylbenzimidazole Sulfonic Acid (Ensulizole) is a water-soluble organic UV filter that primarily absorbs UVB radiation, helping to prevent sunburn. Its water solubility makes it suitable for lighter, less greasy sunscreen and daily moisturizer formulations. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Triethanolamine pH adjuster / emulsifier | Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active. |
| Tapioca Starch Absorbent / texture enhancer | Tapioca starch is a plant-derived polysaccharide powder used in cosmetics to absorb excess oil and moisture, impart a soft matte finish, and improve the sensory texture of formulations. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active UV filter (broad-spectrum) | Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Isododecane Emollient/solvent | Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Xylitylglucoside Humectant / moisturizer | Xylitylglucoside is a sugar-derived humectant, typically used in combination with anhydroxylitol and xylitol, that helps attract and retain water in the skin and supports the skin barrier. It is valued for its skin-hydrating and moisturizing properties in cosmetic formulations. |
| Anhydroxylitol Humectant / moisturizing agent | Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Dicaprylyl Carbonate Emollient / texture enhancer | Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Ceteareth-20 Emulsifier/surfactant | Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active. |
| Glyceryl Monostearate Emulsifier / emollient | Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties. |
| Polyester-7 Film former / texture enhancer | Polyester-7 is a synthetic polyester polymer used in cosmetic formulations primarily as a film-forming agent that improves spreadability, wear, and the sensory feel of products such as sunscreens, makeup, and lotions. It is considered a formulation/base ingredient rather than a biologically active treatment ingredient. |
| Neopentyl Glycol Diheptanoate Emollient | Neopentyl Glycol Diheptanoate is a synthetic diester emollient used in skincare and cosmetics to provide a light, non-greasy skin feel and to soften and smooth the skin. It functions as a base/texture ingredient rather than a treatment active. |
| Blueberry Extract Key active Antioxidant | Blueberry extract is a botanical ingredient rich in anthocyanins, vitamins, and polyphenols, used in skincare primarily for its antioxidant and soothing properties to help protect against free radical damage. It is often included in serums and creams for environmental protection and skin-conditioning effects. |
| Sodium Polyacrylate Thickener / absorbent | Sodium polyacrylate is a superabsorbent acrylic-acid polymer used in skincare as a thickening, stabilizing, and water-binding agent that can hold large amounts of liquid to create gel-like textures. It functions as a formulation and texture-enhancing ingredient rather than a biologically active treatment. |
| Biosaccharide Gum-4 Skin-conditioning / soothing agent | Biosaccharide Gum-4 is a polysaccharide derived from microbial fermentation of plant sugars, used in topical formulations as a film-forming humectant and soothing agent. It is reported to help reduce visible signs of irritation and provide a smoothing, hydrating feel to the skin. |
| 2-hexanediol Humectant/preservative-booster | 1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active. |
| Capsicum Annuum Fruit Extract Key active Skin-conditioning / circulation stimulant | Capsicum Annuum Fruit Extract is derived from chili pepper fruit and contains capsaicinoids, vitamins, and antioxidants. In skincare it is used to stimulate local circulation, provide a warming sensation, and for its antioxidant and conditioning properties. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.