Below is every ingredient in 1% Salicylic Acid Oil-Free Moisturizer For Face with Oat Extract - 50g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild contact irritation | Rare | Occasional redness or stinging, usually in sensitive or compromised skin. |
| Allergic contact dermatitis | Very rare | Isolated case reports; considered a low-sensitizing ingredient. |
| Comedogenicity / clogged pores | Rare | Generally low comedogenic potential, but acne-prone individuals may occasionally react. |
| Mild skin irritation | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Contact allergy/sensitization | Very rare | Silicones are low-allergenicity; documented allergic reactions are exceptional. |
| Eye irritation | Rare | Possible transient stinging if product enters the eyes. |
| Mild skin irritation or redness | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Clogged pores / comedogenic-related breakouts | Uncommon | Often anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well. |
| Eye irritation on accidental contact | Rare | Transient stinging or discomfort if product enters the eyes. |
| 1,4-dioxane contamination concern | Rare | Ethoxylation may leave trace 1,4-dioxane byproduct; mitigated by manufacturer vacuum stripping. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Sodium Polyacrylate Thickener / absorbent | Sodium polyacrylate is a superabsorbent acrylic-acid polymer used in skincare as a thickening, stabilizing, and water-binding agent that can hold large amounts of liquid to create gel-like textures. It functions as a formulation and texture-enhancing ingredient rather than a biologically active treatment. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Trideceth-6 Surfactant/emulsifier | Trideceth-6 is a polyethylene glycol ether of tridecyl alcohol used as a nonionic surfactant, emulsifier, and solubilizer in cosmetic formulations. It helps blend oil and water phases and disperse fragrances or other oily components in water-based products. |
| PEG/PPG-18/18 Dimethicone Silicone-based emulsifier/conditioning agent | PEG/PPG-18/18 Dimethicone is a water-dispersible silicone surfactant used to emulsify, stabilize, and impart a smooth, silky feel to skincare and cosmetic formulations. It functions primarily as an emulsifier and skin-conditioning agent rather than a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Dicetyl Phosphate Emulsifier / co-emulsifier | Dicetyl Phosphate is an anionic phosphate ester used in cosmetic formulations primarily as an emulsifier and stabilizer, often paired with Ceteth-10 Phosphate to form oil-in-water emulsions. It helps maintain emulsion stability and texture rather than providing a direct skin treatment effect. |
| Ceteth-10 Phosphate Emulsifier / surfactant | Ceteth-10 Phosphate is a phosphate ester of ethoxylated cetyl alcohol used primarily as an oil-in-water emulsifier and surfactant in creams, lotions, and sunscreens. It helps stabilize formulations and improve texture rather than providing a direct therapeutic effect on the skin. |
| Saccharide Isomerate Humectant / moisturizer | Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration and improve moisture retention. It is structurally similar to carbohydrates naturally found in the skin's upper layers. |
| Avena Sativa Bran Extract Soothing / anti-irritant emollient | Avena Sativa (oat) bran extract is a botanical derived from oat bran, rich in beta-glucans, avenanthramides, and polysaccharides. It is used in skincare to soothe, hydrate, and reduce irritation, and to support the skin barrier. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Butylated Hydroxytoluene Antioxidant/preservative | Butylated Hydroxytoluene (BHT) is a synthetic antioxidant used in cosmetic formulations to prevent oxidation and rancidity of oils and fats, helping maintain product stability and shelf life. It functions as a stabilizer rather than a therapeutic active. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.