Below is every ingredient in 2% Sali-Cinamide Anti-Acne Body Wash - 250 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin irritation or dryness | Uncommon | More likely at higher concentrations or with prolonged contact, though milder than sulfates. |
| Eye irritation | Uncommon | Can cause stinging if formulations contact the eyes. |
| Allergic contact dermatitis | Rare | Sensitization reported infrequently in patch-test literature. |
| Mucosal irritation in oral products | Rare | Occasionally noted with toothpaste use in sensitive individuals. |
| Skin or eye irritation | Uncommon | Mild stinging or irritation, more likely in concentrated or rinse-off products and around the eyes. |
| Cross-reactivity with related surfactants | Rare | Patch-test reactions may overlap with chemically related amphoteric or amine-containing surfactants. |
| Skin irritation | Rare | Mild redness or stinging, typically in sensitive individuals. |
| Contact dermatitis / allergic reaction | Very rare | Reported occasionally, often linked to residual acrylate monomers rather than the polymer itself. |
| Dryness or tightness | Uncommon | Film-forming action may cause a tight sensation in some users. |
| Clogged pores / comedogenicity | Rare | Generally considered low risk, but possible in occlusive formulations on acne-prone skin. |
| Mild skin dryness or tightness | Uncommon | More likely with high concentrations or frequent use on already dry skin. |
| Skin irritation or redness | Rare | Generally considered low-irritant; possible in sensitive individuals or with prolonged contact. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Sodium Lauroyl Sarcosinate Surfactant / cleansing agent | Sodium Lauroyl Sarcosinate is an amino acid-derived anionic surfactant used in cleansers, shampoos and toothpastes to provide gentle foaming and cleansing. It is generally considered milder than traditional sulfate surfactants. |
| Cocamidopropyl Betaine Surfactant / foaming cleanser | Cocamidopropyl Betaine is an amphoteric surfactant derived from coconut oil and dimethylaminopropylamine, used in cleansers, shampoos, and body washes to provide gentle foaming, viscosity, and to reduce the harshness of stronger anionic surfactants. It is widely regarded as mild but is a recognized contact allergen. |
| Acrylates Copolymer Film-former / texture enhancer | Acrylates Copolymer is a synthetic polymer used in skincare and cosmetics primarily as a film-forming agent, viscosity modifier, and to improve product texture and wear. It helps control sebum, provides a smooth feel, and stabilizes formulations. |
| Sodium Cocoyl Isethionate Mild surfactant/cleansing agent | Sodium Cocoyl Isethionate is a gentle, coconut-derived anionic surfactant widely used in syndet cleansing bars and facial cleansers to produce a creamy lather while being milder than traditional soaps. It cleanses by emulsifying oils and debris with relatively low irritation potential. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Sodium Methyl Lauroyl Taurate Surfactant/cleansing agent | Sodium Methyl Lauroyl Taurate is a mild anionic surfactant derived from coconut-based fatty acids and taurine, used in cleansers and shampoos to provide gentle foaming and cleansing. It is valued for being less irritating and drying than harsher sulfate-based surfactants. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Cocamide MEA Foaming agent / surfactant | Cocamide MEA (Cocamide monoethanolamide) is a coconut oil-derived non-ionic surfactant used in cleansers and shampoos as a foam booster, viscosity enhancer, and emulsion stabilizer. It is a formulation/base ingredient rather than a treatment active. |
| Imidurea Preservative | Imidurea (imidazolidinyl urea) is a formaldehyde-releasing antimicrobial preservative used in cosmetics and skincare to prevent bacterial and fungal growth. It works by slowly releasing small amounts of formaldehyde into the formulation. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Glyceryl Glucoside Key active Humectant / moisturizer | Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Butylene glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Glycol Stearate Emollient / opacifying agent | Glycol stearate is the ester of ethylene glycol and stearic acid, used in cosmetics as an emollient, thickener, and pearlescent opacifying agent. It improves texture and gives products a smooth, creamy appearance. |
| Phenyl Ethyl Alcohol Fragrance/preservative | Phenyl Ethyl Alcohol (phenethyl alcohol) is a rose-scented aromatic alcohol used in skincare as a fragrance component and as a mild antimicrobial preservative, often to boost the efficacy of other preservative systems. It has a broad spectrum of activity, particularly against Gram-negative bacteria. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Microcrystalline Cellulose Texturizer/bulking agent | Microcrystalline cellulose is a purified, partially depolymerized cellulose derived from plant fibers, used in skincare and cosmetics as a bulking agent, texture modifier, anti-caking agent, and emulsion stabilizer. It is inert and primarily serves formulation purposes rather than providing active skin benefits. |
| Mannitol Humectant/antioxidant | Mannitol is a sugar alcohol (polyol) used in skincare primarily as a humectant and texture-enhancing agent, and it also functions as a free-radical scavenger. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Hydroxypropyl Methylcellulose Thickener/film-former | Hydroxypropyl Methylcellulose (HPMC) is a semi-synthetic cellulose derivative used in skincare and cosmetics as a thickening agent, emulsion stabilizer, film former, and binder. It is generally considered safe, non-toxic, and non-irritating in topical formulations. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Lactic Acid Key active Chemical exfoliant (AHA) | Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Saccharide Isomerate Humectant / moisturizer | Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration and improve moisture retention. It is structurally similar to carbohydrates naturally found in the skin's upper layers. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.