Below is every ingredient in FREE - C-Cinamide Radiance Sunscreen Aqua Gel - 80g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Vaccinum Sect. Cyanococcus Fruit Extract is derived from blueberry fruit and is rich in anthocyanins, vitamins, and polyphenols. It is used in topical formulations primarily for its antioxidant and skin-conditioning properties.
Phoenix Dactylifera (date palm) Extract is derived from date fruit or seeds and is used in cosmetics for its antioxidant, moisturizing, and skin-conditioning properties, owing to its content of polyphenols, flavonoids, sugars, and vitamins. It is generally considered well tolerated in topical formulations.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Allergic contact dermatitis | Rare | Uncommon sensitization reactions reported, sometimes linked to benzoate component. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
| Mild skin irritation or redness | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Clogged pores / comedogenic-related breakouts | Uncommon | Often anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well. |
| Eye irritation on accidental contact | Rare | Transient stinging or discomfort if product enters the eyes. |
| Contact allergic reaction (allergic contact dermatitis) | Rare | Avobenzone is a recognized but uncommon cause of sunscreen allergy. |
| Photoallergic or photocontact dermatitis | Rare | Reactions triggered or worsened by sun exposure have been reported. |
| Skin irritation, redness, or stinging | Uncommon | Mild transient irritation may occur, particularly on sensitive or broken skin. |
| Eye irritation | Uncommon | Can cause stinging if the product migrates into the eyes. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Benzophenone-3 Key active UV filter (sunscreen agent) | Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Ethoxydiglycol Solvent / penetration enhancer | Ethoxydiglycol (diethylene glycol monoethyl ether) is a glycol ether used in cosmetic formulations primarily as a solvent and viscosity reducer that helps dissolve active ingredients and improve their skin penetration. It is considered a formulation aid rather than a therapeutic active. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Vaccinum Sect. Cyanococcus Fruit Extract Key active Antioxidant / skin-conditioning | Vaccinum Sect. Cyanococcus Fruit Extract is derived from blueberry fruit and is rich in anthocyanins, vitamins, and polyphenols. It is used in topical formulations primarily for its antioxidant and skin-conditioning properties. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Anhydroxylitol Humectant / moisturizing agent | Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors. |
| Citrus Paradisi Fruit Extract Antioxidant / skin-conditioning | Citrus Paradisi (grapefruit) Fruit Extract is derived from grapefruit and is used in cosmetics for its antioxidant vitamin C content, fragrance, and mild astringent/skin-conditioning properties. It is generally considered a supportive ingredient rather than a primary clinical active. |
| Phoenix Dactylifera Extract Key active Antioxidant / skin-conditioning | Phoenix Dactylifera (date palm) Extract is derived from date fruit or seeds and is used in cosmetics for its antioxidant, moisturizing, and skin-conditioning properties, owing to its content of polyphenols, flavonoids, sugars, and vitamins. It is generally considered well tolerated in topical formulations. |
| Sodium Ascorbyl Phosphate Key active Vitamin C derivative / antioxidant | Sodium Ascorbyl Phosphate is a stable, water-soluble derivative of vitamin C (ascorbic acid) that is converted to active ascorbic acid in the skin. It provides antioxidant protection, supports collagen synthesis, and is also studied for its brightening and anti-acne (antibacterial) effects. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.