Below is every ingredient in Oil-Free Daily Face Moisturizer With Hyaluronic Acid, Ceramides & Multivitamins for Non-Greasy & Hydrated Skin - 100g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
No standout actives — this is a basic/support formula.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild skin irritation | Rare | Possible at higher concentrations, usually transient. |
| Allergic contact dermatitis | Rare | Sensitization reported in isolated patch-test cases. |
| Enhanced penetration of other ingredients | Uncommon | By disrupting skin barrier it may slightly increase absorption of co-applied substances. |
| Skin irritation | Rare | Mild transient irritation possible, often related to other formula components or pH. |
| Eye irritation | Uncommon | Possible stinging if product enters the eyes, typically formulation-dependent. |
| Nitrosamine formation concern | Very rare | As a secondary amine-related compound, potential to form nitrosamines if combined with nitrosating agents; regulated in formulation. |
| Contact allergy/sensitization | Very rare | PEG-based compounds can rarely act as sensitizers, particularly on broken skin. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Folliculitis or pore congestion | Very rare | Theoretical with heavy occlusive use; not well documented. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| C10-30 Alkyl Acrylate Crosspolymer Emulsion stabilizer / rheology modifier | C10-30 Alkyl Acrylate Crosspolymer is a synthetic acrylic polymer used to thicken, stabilize, and emulsify cosmetic formulations, particularly oil-in-water systems and gels. It functions as a base/formulation aid rather than a treatment active and helps suspend ingredients and improve product texture. |
| 2-Amino-2-Methyl-1-Propanol pH adjuster / buffering agent | 2-Amino-2-Methyl-1-Propanol (AMP) is an alkaline amino alcohol used in cosmetic formulations primarily to neutralize acidic components and adjust or stabilize pH. It also functions as a buffering and emulsion-stabilizing agent in products such as lotions, sunscreens, and hair sprays. |
| PEG/PPG-17/6 Copolymer Humectant/solvent | PEG/PPG-17/6 Copolymer is a polyethylene glycol/polypropylene glycol block copolymer used in cosmetics primarily as a humectant, solvent, and viscosity-modifying agent. It helps retain moisture and improve product texture and spreadability. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Hydrolyzed Sclerotium Gum Thickener/Texture Enhancer | Hydrolyzed Sclerotium Gum is a polysaccharide derived from the enzymatic or chemical breakdown of sclerotium gum, a fungal-fermentation biopolymer. It functions as a viscosity controller, stabilizer, and skin-conditioning agent that improves texture and sensory feel in formulations. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Coconut Alkanes Emollient / skin-conditioning agent | Coconut Alkanes is a lightweight, plant-derived emollient (often paired with Coco-Caprylate/Caprate) used to soften skin and provide a silky, non-greasy slip in formulations. It serves as a natural alternative to silicones and mineral oils. |
| Coco-Caprylate Caprate Emollient / skin-conditioning agent | Coco-Caprylate/Caprate is a lightweight ester emollient derived from coconut-sourced fatty alcohols and caprylic/capric acids, used to provide a smooth, dry, non-greasy skin feel and to act as a silicone alternative. It functions primarily as a spreading agent and texture enhancer in lotions, creams, and sunscreens. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Ceteareth-20 Emulsifier/surfactant | Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| PEG-100 Stearate Emulsifier/surfactant | PEG-100 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic surfactant and emulsifier to stabilize oil-in-water formulations and improve skin feel. It functions as a formulation base ingredient rather than a therapeutic active. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Dimethicone/Vinyl Dimethicone Crosspolymer Silicone elastomer / texture enhancer | Dimethicone Vinyl Dimethicone Crosspolymer is a crosslinked silicone elastomer used in skincare and cosmetics to impart a silky, smooth feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation/sensory agent rather than a biologically active treatment ingredient. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Ceramide 3 Skin barrier replenisher / emollient | Ceramide 3 (also called Ceramide NP) is a lipid naturally found in the skin's stratum corneum that helps restore and maintain the skin barrier and reduce transepidermal water loss. It is widely used in moisturizers and barrier-repair formulations to improve hydration and skin integrity. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Ceteareth-20 Emulsifier/surfactant | Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active. |
| Polyglyceryl-10 Stearate Emulsifier | Polyglyceryl-10 Stearate is a non-ionic emulsifier and surfactant derived from polyglycerol and stearic acid, used to blend oil and water phases and stabilize emulsions in skincare formulations. It is valued for its mildness and is common in formulations marketed as gentle or PEG-free. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| 1,2-Hexanediol Humectant / preservative booster | 1,2-Hexanediol is a synthetic diol used in skincare as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, often allowing reduced or preservative-free systems. It helps maintain product stability while contributing mild moisturizing properties. |
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.