Thedermaco · 🇮🇳 India

Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml

24 ingredients
What's in it

Below is every ingredient in Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
1 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Moderate
Highest comedogenic rating 2/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens
Pregnancy: use caution
Salicylic Acid — discuss with a doctor

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml fungal-acne safe?
Based on its listed ingredients, Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml contains 1 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glucose Dioleate. If you are fungal-acne prone, you may want to avoid these.
Does Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml.
Will Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml clog pores?
The highest comedogenic rating among its listed ingredients is 2/5 (moderate). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml safe to use in pregnancy?
Pore Minimizing Clay Daily Face Wash with 1% Niacinamide & 2% PHA - 100 ml contains 1 ingredient(s) commonly flagged for caution in pregnancy in published guidance: Salicylic Acid. Discuss with your doctor before using it while pregnant or breastfeeding.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Gluconolactone
Polyhydroxy acid (PHA) exfoliant/humectant

Gluconolactone is a polyhydroxy acid that gently exfoliates the skin surface, provides antioxidant and humectant benefits, and is often considered milder than alpha hydroxy acids. It is well tolerated, including by sensitive skin, due to its larger molecular size and slower penetration.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Lens Esculenta
Skin-conditioning / antioxidant

Lens Esculenta (lentil) seed extract is a botanical ingredient used in skincare for its conditioning, antioxidant, and pore-refining properties, often marketed to improve skin texture and tone. It is rich in vitamins, minerals, and amino acids derived from the lentil plant.

Fruit Extract
Antioxidant/conditioning agent

Fruit extracts are plant-derived ingredients (e.g., from apple, grape, citrus) used in skincare for antioxidant, humectant, and mild exfoliating properties, often supplying vitamins, polyphenols, and naturally occurring acids. Their efficacy and potency vary widely depending on source, concentration, and processing.

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Salicylic Acid
Beta-hydroxy acid (BHA) exfoliant / keratolytic

Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Mild transient skin dryness or tightnessUncommonMore likely with high concentrations or frequent use in those with already dry or compromised skin.
Skin or eye irritationRareGenerally considered low-irritation; mild stinging possible on contact with eyes during cleansing.
Allergic contact dermatitisVery rareSensitization to this amino acid surfactant is uncommon and infrequently documented.
Skin dryness or tightnessCommonResults from sebum and moisture absorption, especially with frequent use or on dry skin.
Mild skin irritation or rednessUncommonTransient erythema, particularly on sensitive skin or with prolonged contact.
Contact dermatitisRareAllergic or irritant reaction; may be linked to trace minerals or co-formulated ingredients rather than the clay itself.
Respiratory irritation from powder inhalationRareRelevant when handling dry powder forms; not typical with finished topical products.
Mild skin dryness or tightnessUncommonMore likely with high concentrations or frequent use on already dry skin.
Skin irritation or rednessRareGenerally considered low-irritant; possible in sensitive individuals or with prolonged contact.
Eye irritationRareCan cause stinging if cleanser enters the eyes.
Cross-reactivity with related surfactantsRarePatch-test reactions may overlap with chemically related amphoteric or amine-containing surfactants.
Skin irritationUncommonGenerally well tolerated, but mild irritation can occur, particularly with high concentrations or compromised skin barrier.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Sodium Cocoyl Glycinate
Mild surfactant/cleansing agent
Sodium Cocoyl Glycinate is a gentle amino acid-derived (glycine and coconut fatty acid) anionic surfactant used in cleansers and shampoos to produce foam and remove dirt and oil. It is valued for its mildness and skin-friendly, near-neutral pH compared to harsher sulfate surfactants.
Montmorillonite (French Green Clay)
Absorbent/clay
Montmorillonite (French Green Clay) is a naturally occurring smectite clay used in masks and cleansers to absorb sebum, oil, and impurities and provide gentle mechanical exfoliation. It is valued for its oil-binding and mattifying properties in formulations for oily and acne-prone skin.
Sodium Cocoyl Isethionate
Mild surfactant/cleansing agent
Sodium Cocoyl Isethionate is a gentle, coconut-derived anionic surfactant widely used in syndet cleansing bars and facial cleansers to produce a creamy lather while being milder than traditional soaps. It cleanses by emulsifying oils and debris with relatively low irritation potential.
Cocamidopropyl Betaine
Surfactant / foaming cleanser
Cocamidopropyl Betaine is an amphoteric surfactant derived from coconut oil and dimethylaminopropylamine, used in cleansers, shampoos, and body washes to provide gentle foaming, viscosity, and to reduce the harshness of stronger anionic surfactants. It is widely regarded as mild but is a recognized contact allergen.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Acrylates Crosspolymer-4
Film former / rheology modifier
Acrylates Crosspolymer-4 is a synthetic cross-linked acrylic polymer used in cosmetic formulations as a thickener, stabilizer, and film former to improve texture and sensory feel. It is a formulation aid rather than a biologically active treatment ingredient.
Gluconolactone Key active
Polyhydroxy acid (PHA) exfoliant/humectant
Gluconolactone is a polyhydroxy acid that gently exfoliates the skin surface, provides antioxidant and humectant benefits, and is often considered milder than alpha hydroxy acids. It is well tolerated, including by sensitive skin, due to its larger molecular size and slower penetration.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Lens Esculenta Key active
Skin-conditioning / antioxidant
Lens Esculenta (lentil) seed extract is a botanical ingredient used in skincare for its conditioning, antioxidant, and pore-refining properties, often marketed to improve skin texture and tone. It is rich in vitamins, minerals, and amino acids derived from the lentil plant.
Fruit Extract Key active
Antioxidant/conditioning agent
Fruit extracts are plant-derived ingredients (e.g., from apple, grape, citrus) used in skincare for antioxidant, humectant, and mild exfoliating properties, often supplying vitamins, polyphenols, and naturally occurring acids. Their efficacy and potency vary widely depending on source, concentration, and processing.
Alpha-Glucan Oligosaccharide
Prebiotic
Alpha-Glucan Oligosaccharide is a plant-derived prebiotic sugar that selectively nourishes beneficial skin microflora while helping to limit growth of less desirable bacteria, supporting a balanced skin microbiome. It is commonly used in formulations aimed at maintaining skin barrier health and microbial equilibrium.
Aloe Barbadensis Extract
Soothing/moisturizing agent
Aloe Barbadensis Extract is a plant-derived ingredient rich in polysaccharides, vitamins, and amino acids used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly incorporated into moisturizers, after-sun products, and soothing formulations.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
PEG-50
Emulsifier/surfactant
PEG-50 is a polyethylene glycol derivative used in cosmetic and skincare formulations primarily as an emulsifier, humectant, and solubilizing agent. It helps blend oil and water phases and improve product texture rather than acting as a therapeutic active.
Shea Butter
Emollient / occlusive moisturizer
Shea butter is a plant-derived fat extracted from the nuts of the African shea tree (Vitellaria paradoxa), rich in triglycerides and unsaponifiable compounds. It is widely used in skincare to soften skin, reduce transepidermal water loss, and provide an occlusive barrier.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Salicylic Acid Key active
Beta-hydroxy acid (BHA) exfoliant / keratolytic
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Glycolic Acid Key active
Chemical exfoliant (AHA)
Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
PEG-120 Methyl
Thickener / surfactant
PEG-120 Methyl Glucose Dioleate is a polyethylene glycol-derived emulsifying and thickening agent commonly used to increase viscosity and improve texture in cleansers and surfactant-based formulations. It functions as a formulation aid rather than an active treatment ingredient.
Glucose Dioleate
Emollient/emulsifier
Glucose Dioleate is a sugar-derived ester of glucose and oleic acid used in cosmetic formulations as an emollient, skin-conditioning agent, and nonionic emulsifier. It helps soften skin and stabilize oil-and-water blends.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →