Below is every ingredient in Snail Peptide 96 Hydrating Serum with Snail Mucin & Peptide Complex for Smooth & Moisturized Skin - 30 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Snail Secretion Filtrate is a mucin-derived ingredient rich in glycoproteins, hyaluronic acid, glycolic acid, and antimicrobial peptides, used for hydration, soothing, and supporting skin barrier repair. It is commonly featured in moisturizing and post-procedure recovery formulations.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Palmitoyl Tripeptide-1 is a synthetic palmitoylated peptide (sequence Gly-His-Lys) used in cosmetics to signal fibroblasts and support collagen and extracellular matrix synthesis. It is commonly combined with other peptides in anti-aging and firming formulations.
Palmitoyl Tetrapeptide-7 is a palmitoylated synthetic peptide used in cosmetic formulations, primarily marketed to help reduce inflammatory signaling and support a more even, firmer skin appearance. It is commonly paired with other peptides such as Palmitoyl Tripeptide-1 in anti-aging products.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild skin irritation or stinging | Common | More likely at higher concentrations or on compromised/sensitive skin |
| Allergic contact dermatitis | Uncommon | Recognized contact allergen; confirmed via patch testing |
| Irritant contact dermatitis | Uncommon | Non-allergic irritation, often dose-dependent |
| Worsening of pre-existing eczema or barrier-impaired skin | Rare | Penetration-enhancing effect may increase reactivity |
| Systemic toxicity from topical use | Very rare | Reported mainly with extensive application on broken skin, especially in infants or burn patients |
| Mild irritation or stinging | Uncommon | Transient and usually resolves; more likely on sensitized skin. |
| Acne or breakouts | Rare | May occur in acne-prone individuals depending on formulation. |
| Urticaria/hypersensitivity reaction | Very rare | Possible in those with mollusc-related allergies. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Snail Secretion Filtrate Key active Hydrating/reparative active | Snail Secretion Filtrate is a mucin-derived ingredient rich in glycoproteins, hyaluronic acid, glycolic acid, and antimicrobial peptides, used for hydration, soothing, and supporting skin barrier repair. It is commonly featured in moisturizing and post-procedure recovery formulations. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Palmitoyl Tripeptide-1 Key active Signal peptide / anti-aging active | Palmitoyl Tripeptide-1 is a synthetic palmitoylated peptide (sequence Gly-His-Lys) used in cosmetics to signal fibroblasts and support collagen and extracellular matrix synthesis. It is commonly combined with other peptides in anti-aging and firming formulations. |
| Palmitoyl Tetrapeptide-7 Key active Anti-aging signal peptide | Palmitoyl Tetrapeptide-7 is a palmitoylated synthetic peptide used in cosmetic formulations, primarily marketed to help reduce inflammatory signaling and support a more even, firmer skin appearance. It is commonly paired with other peptides such as Palmitoyl Tripeptide-1 in anti-aging products. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Sodium Levulinate Preservative / humectant | Sodium Levulinate is the sodium salt of levulinic acid, derived from natural sugars, used primarily as a mild preservative and antimicrobial agent that also provides moisturizing properties. It is often paired with sodium anisate in natural-leaning preservative systems. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Sodium Hyaluronate Crosspolymer Humectant / hydrating agent | Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Sodium Acetylated Hyaluronate Humectant / moisturizer | Sodium Acetylated Hyaluronate is an acetylated, sodium-salt derivative of hyaluronic acid used in skincare for its enhanced moisture retention and improved skin adherence compared to standard hyaluronic acid. The acetyl modification increases lipophilicity, allowing better surface binding and prolonged hydration. |
| Hydrolyzed Sodium Hyaluronate Humectant / hydrating agent | Hydrolyzed sodium hyaluronate is an enzymatically or chemically fragmented, low-molecular-weight form of sodium hyaluronate used in skincare to attract and bind water. Its smaller size allows better penetration into the upper layers of the skin compared to high-molecular-weight hyaluronic acid, supporting surface hydration and a smoother appearance. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Sodium Polyacryloyldimethyl Taurate Emulsifier / thickener | Sodium Polyacryloyldimethyl Taurate is a synthetic acrylate-based polymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create smooth, gel-like textures and stabilizes oil-in-water emulsions. |
| Sodium Polyacrylate Thickener / absorbent | Sodium polyacrylate is a superabsorbent acrylic-acid polymer used in skincare as a thickening, stabilizing, and water-binding agent that can hold large amounts of liquid to create gel-like textures. It functions as a formulation and texture-enhancing ingredient rather than a biologically active treatment. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.