Tirabeauty · 🇮🇳 India

Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml

38 ingredients
What's in it

Below is every ingredient in Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
3 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml fungal-acne safe?
Based on its listed ingredients, Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml contains 3 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): GLYCERYL STEARATE, PENTAERYTHRITYL TETRAISOSTEARATE, STEARIC ACID. If you are fungal-acne prone, you may want to avoid these.
Does Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml.
Will Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Akind Drop A Hint Hydrating Skin Tint Spf 30 Pa 120 Vanilla 30 Ml safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

ETHYLHEXYL METHOXYCINNAMATE
UV filter (UVB sunscreen)

Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.

OCTOCRYLENE
UV filter

Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.

NIACINAMIDE (VITAMIN B3)
Barrier support / brightening active

Niacinamide is a water-soluble form of vitamin B3 used topically to support the skin barrier, regulate sebum, and reduce hyperpigmentation and redness. It is generally well tolerated across a range of skin types.

ETHYLHEXYL SALICYLATE
UV filter (UVB sunscreen)

Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.

BUTYL METHOXYDIBENZOYLMETHANE
UV filter (UVA sunscreen)

Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.

BENZOPHENONE 3
UV filter (sunscreen agent)

Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Skin irritationRareGenerally considered low-irritant; mild irritation reported occasionally, often related to other formulation components.
Allergic contact dermatitisVery rareSilicones are largely inert; sensitization is uncommonly reported.
Acneiform breakouts / pore congestionRareConsidered low comedogenic potential, but occlusive film may contribute in acne-prone individuals.
Eye irritationRarePossible mild stinging or irritation upon direct ocular contact.
Mild transient stinging or irritationUncommonMore likely on broken or compromised skin or at high concentrations.
Redness or itchingRareTypically resolves after discontinuation.
Contact irritation or mild stingingUncommonTransient skin irritation, especially on sensitive or compromised skin.
Photoallergic contact dermatitisRareReaction triggered by combined exposure to the ingredient and sunlight.
Potential endocrine/estrogenic activityVery rareSuggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain.
Contact dermatitis / skin irritationUncommonLocalized redness, itching, or stinging on application.
Systemic absorptionCommonDetectable in blood after use; clinical significance unclear and not equated with harm.
Benzophenone formation over timeUncommonDegradation can yield trace benzophenone; relevance to skin health under study.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
AQUA
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
PHENYL TRIMETHICONE
Silicone emollient/conditioning agent
Phenyl Trimethicone is a phenyl-substituted silicone used in skincare and cosmetics to impart a smooth, silky feel, add shine, and provide water-repellent film-forming and conditioning properties. It functions as a formulation/base ingredient rather than a treatment active.
BUTYLENE GLYCOL
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
ETHYLHEXYL METHOXYCINNAMATE Key active
UV filter (UVB sunscreen)
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
OCTOCRYLENE Key active
UV filter
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
NIACINAMIDE (VITAMIN B3) Key active
Barrier support / brightening active
Niacinamide is a water-soluble form of vitamin B3 used topically to support the skin barrier, regulate sebum, and reduce hyperpigmentation and redness. It is generally well tolerated across a range of skin types.
PENTAERYTHRITYL TETRAISOSTEARATE
Emollient/skin-conditioning agent
Pentaerythrityl Tetraisostearate is an ester of pentaerythritol and isostearic acid used as an emollient, thickener, and pigment-wetting agent in cosmetic formulations. It imparts spreadability and a smooth feel, commonly appearing in color cosmetics, lipsticks, and skincare creams.
ETHYLHEXYL SALICYLATE Key active
UV filter (UVB sunscreen)
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
CAPRYLIC/CAPRIC TRIGLYCERIDE
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
CAPRYLYL METHICONE
Emollient / spreading agent
Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics.
ISOHEXADECANE
Emollient / solvent
Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients.
POLYMETHYLSILSESQUIOXANE
Texture enhancer / mattifying agent
Polymethylsilsesquioxane is a silicone-based spherical powder used in skincare and cosmetics to impart a smooth, soft-focus, mattifying feel and improve spreadability. It is a formulation/texture ingredient rather than a treatment active.
BUTYL METHOXYDIBENZOYLMETHANE Key active
UV filter (UVA sunscreen)
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
BENZOPHENONE 3 Key active
UV filter (sunscreen agent)
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
SODIUM LAURETH SULPHATE
Surfactant/cleansing agent
Sodium laureth sulphate (SLES) is an anionic surfactant widely used in cleansers, shampoos, and body washes to provide foaming and detergent action by lowering surface tension and emulsifying oils. It is generally considered milder than sodium lauryl sulphate due to ethoxylation.
GLYCERIN
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
RUBIA TINCTORUM (INDIAN MADDER) ROOT EXTRACT
Colorant / antioxidant
Rubia tinctorum (madder) root extract is derived from the madder plant root and historically used as a natural red dye; in cosmetics it functions mainly as a colorant and provides some antioxidant activity. It contains anthraquinone compounds such as alizarin and purpurin.
HYALURONIC ACID Key active
Humectant / hydrating agent
Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types.
PHENOXYETHANOL
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
CETYL ALCOHOL
Emollient / emulsifier
Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions.
STEARIC ACID
Emulsifier / thickener
Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active.
ALUMINUM STARCH OCTENYLSUCCINATE
Absorbent / texture enhancer
Aluminum Starch Octenylsuccinate is a modified starch derivative used in cosmetic formulations to absorb oil and moisture, impart a smooth powdery feel, and reduce greasiness. It functions as an anticaking agent, viscosity controller, and skin-conditioning agent rather than a biological active.
CYCLOPENTASILOXANE
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
PEG/PPG-20/15 DIMETHICONE
Silicone-based emulsifier/surfactant
PEG/PPG-20/15 Dimethicone is a water-soluble silicone polyether used primarily as an emulsifier and surfactant in cosmetic formulations, helping to stabilize emulsions and improve spreadability and skin feel. It is considered a formulation aid rather than a skin-treatment active.
POLYBUTENE
Emollient / thickener
Polybutene is a synthetic liquid polymer derived from butene, used in cosmetics as an emollient, thickening agent, and binder. It imparts gloss, viscosity, and a smooth, non-tacky film, and is common in lip glosses, balms, and other long-wear formulations.
CETEARYL ALCOHOL
Emollient/emulsifier
Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions.
GLYCYRRHIZA GLABRA (LICORICE) ROOT EXTRACT Key active
Brightening / anti-inflammatory antioxidant
Licorice root extract is a botanical ingredient valued in skincare for its skin-brightening and soothing properties, primarily attributed to compounds such as glabridin and liquiritin. It is used to help reduce hyperpigmentation, calm inflammation, and provide antioxidant protection.
GLYCERYL STEARATE
Emulsifier/emollient
Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active.
C30-45 ALKYL DIMETHICONE
Emollient/film-former
C30-45 Alkyl Dimethicone is a long-chain alkyl-modified silicone used as a water-resistant emollient, film-former, and texture enhancer in skincare and sunscreen formulations. It helps improve spreadability, impart a smooth feel, and stabilize emulsions.
POLYMETHYLMETHACRYLATE
Bulking agent / texture enhancer
Polymethylmethacrylate (PMMA) is a synthetic polymer used in cosmetics as spherical microbeads that provide a smooth, soft-focus finish and improve product spreadability and texture. It is also used in dermal fillers as a longer-lasting volumizing microsphere.
TALC
Absorbent/Anti-caking agent
Talc is a naturally occurring hydrated magnesium silicate used in cosmetics as a bulking, absorbent, and texture-improving ingredient, particularly in powders and color cosmetics. It helps absorb moisture, improve slip, and provide a smooth, matte feel to formulations.
XANTHAN GUM
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
TOCOPHERYL ACETATE (VITAMIN E) Key active
Antioxidant / skin conditioning
Tocopheryl acetate is a stable, esterified form of vitamin E commonly used in skincare as an antioxidant and emollient. It is converted to active tocopherol in the skin and helps protect against oxidative stress while supporting the skin barrier.
3-0-ETHYL (VITAMIN C) ASCORBIC ACID Key active
Antioxidant / brightening active
3-O-Ethyl ascorbic acid is a stable, ether-derivatized form of vitamin C that converts to ascorbic acid in the skin, providing antioxidant protection, supporting collagen synthesis, and helping reduce hyperpigmentation. Its alkyl substitution improves stability and water solubility compared to pure ascorbic acid.
SQUALANE
Emollient / occlusive moisturizer
Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active.
DISODIUM EDTA
Chelating agent
Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active.
ETHYLHEXYLGLYCERIN
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
PANTHENOL (VITAMIN B5)
Humectant / skin conditioner
Panthenol (provitamin B5) is converted to pantothenic acid in the skin and acts as a humectant and emollient, helping to hydrate, soothe, and support skin barrier function and wound healing. It is widely used in moisturizers, after-sun products, and hair care formulations.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →