Below is every ingredient in Asaya Sheer Milk Fluid Sunscreen Spf 50 Pa 50 Ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Mild skin irritation or stinging | Uncommon | Usually transient, more likely on compromised or sensitive skin or at high concentrations. |
| Allergic contact dermatitis | Rare | Documented in patch-test case reports; considered a low-frequency sensitizer. |
| Eye irritation | Uncommon | Can occur with direct contact in eye-area products. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
| Mild contact irritation | Rare | Occasional redness or stinging, usually in sensitive or compromised skin. |
| Comedogenicity / clogged pores | Rare | Generally low comedogenic potential, but acne-prone individuals may occasionally react. |
| Contact allergic reaction (allergic contact dermatitis) | Rare | Avobenzone is a recognized but uncommon cause of sunscreen allergy. |
| Photoallergic or photocontact dermatitis | Rare | Reactions triggered or worsened by sun exposure have been reported. |
| Skin irritation, redness, or stinging | Uncommon | Mild transient irritation may occur, particularly on sensitive or broken skin. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| 3 Butylene Glycol Humectant/solvent | 3-Butylene glycol (butylene glycol) is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent. It helps attract moisture, dissolve other ingredients, and improve product texture and preservation. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Caprylic Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Benzophenone-3 Key active UV filter (sunscreen agent) | Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients. |
| Trehalose Humectant / moisturizer | Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Ethylhexyl Olivate Emollient | Ethylhexyl Olivate is an olive oil-derived ester (ethylhexyl alcohol and olive fatty acids) used as a skin-conditioning emollient that improves spreadability and provides a light, non-greasy skin feel. It functions primarily as a base/formulation ingredient rather than a therapeutic active. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Amps/Hema Crosspolymer Film former / rheology modifier | AMPS/HEMA Crosspolymer is a synthetic acrylate-based crosslinked polymer used in cosmetic formulations as a thickener, stabilizer, and film-forming agent to improve texture and product stability. It is a formulation/base ingredient rather than a therapeutic active. |
| Polyglyceryl-4 Olivate Emulsifier/surfactant | Polyglyceryl-4 Olivate is a mild, plant-derived nonionic emulsifier produced from polyglycerin and olive oil fatty acids, used to blend oil and water phases and stabilize emulsions. It is valued as a gentle, biodegradable alternative to traditional ethoxylated emulsifiers. |
| C13-15 Alkane Emollient / solvent | C13-15 Alkane is a lightweight, plant-derived (often sugarcane-based) liquid hydrocarbon used as an emollient and spreading agent in skincare. It softens skin, improves product texture, and serves as a sustainable alternative to silicones and mineral oil. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Polyacrylate-13 Rheology modifier / thickener | Polyacrylate-13 is a synthetic acrylate copolymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create stable gels and emulsions and improves product texture without contributing to active treatment effects. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| 3-O Ethyl Ascorbic Acid Key active Antioxidant / brightening vitamin C derivative | 3-O-Ethyl Ascorbic Acid is a stable, water-soluble ethylated derivative of vitamin C that converts to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and pigmentation control. It is valued for greater stability than pure L-ascorbic acid while delivering similar brightening and anti-aging benefits. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Sclerotium Gum Thickener / stabilizer | Sclerotium Gum is a natural polysaccharide produced by fermentation of the fungus Sclerotium rolfsii, used as a thickening, gelling, and emulsion-stabilizing agent in cosmetic formulations. It also imparts a smooth skin feel and helps suspend particles in creams, gels, and serums. |
| Polyisobutene Emollient/film-former | Polyisobutene is a synthetic hydrocarbon polymer used in cosmetics as an emollient, thickener, and film-forming agent that imparts smooth texture, adhesion, and improved spreadability. It is commonly found in long-wear makeup, lip products, and sunscreens to enhance water resistance and product longevity. |
| Coco-Glucoside Mild surfactant/cleanser | Coco Glucoside is a gentle, plant-derived nonionic surfactant (an alkyl polyglucoside made from coconut fatty alcohols and glucose) used as a cleansing and foaming agent in face washes, shampoos, and body cleansers. It is valued for its mildness, biodegradability, and good skin and eye tolerance compared with harsher surfactants. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Pullulan Film-forming agent / texturizer | Pullulan is a naturally derived polysaccharide produced by fermentation of starch by the fungus Aureobasidium pullulans. In skincare it forms a thin, breathable film on the skin, providing a temporary tightening or smoothing effect and helping to stabilize formulations. |
| Sorbitan Isostearate Emulsifier / surfactant | Sorbitan isostearate is a sorbitan ester of isostearic acid used as a nonionic emulsifier and stabilizer in oil-in-water and water-in-oil cosmetic formulations. It helps blend oil and water phases and improves texture and spreadability. |
| Potassium Hydroxide pH adjuster / saponifying agent | Potassium hydroxide is a strong alkaline compound used in cosmetics to adjust pH and to saponify fatty acids in the production of liquid soaps and cleansers. At regulated low concentrations in finished products it is considered safe, functioning as a formulation aid rather than an active treatment. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.