Below is every ingredient in Biodance Cera Nol Gel Toner Pad 291 G explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Hydrolyzed Gardenia Florida Extract is a botanical-derived ingredient obtained by hydrolyzing extracts of the gardenia plant, used in skincare for its antioxidant and skin-conditioning properties. It is valued for components such as iridoid glycosides and crocetin derivatives that may help support skin barrier and provide soothing effects.
Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or at high concentrations. |
| Allergic contact dermatitis | Rare | Documented in patch-test studies but considered a relatively weak sensitizer. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Mild transient skin irritation or stinging | Uncommon | More likely at higher concentrations or on compromised skin barriers. |
| Contact dermatitis / allergic sensitization | Rare | Occasional case reports; patch testing can confirm. |
| Eye irritation on accidental contact | Uncommon | Relevant mainly in leave-on or rinse-off products near the eye area. |
| Mild transient irritation or stinging | Rare | Generally well tolerated; occasional mild reactions, often on compromised or sensitive skin. |
| Contact dermatitis or allergic reaction | Very rare | Allantoin is considered to have very low sensitizing potential; allergic responses are exceptionally uncommon. |
| Mild skin irritation | Rare | Generally well tolerated; occasional transient irritation in sensitive individuals. |
| Contact allergy / sensitization | Very rare | Polyglyceryl esters are considered low-sensitizing; reactions are uncommon. |
| Eye irritation | Uncommon | As a surfactant, may cause mild stinging if it contacts the eyes. |
| Skin dryness or tightness | Rare | Possible with high concentrations in leave-on products. |
| Redness or erythema | Uncommon | Typically mild and resolves after discontinuation. |
| Contact allergy / allergic dermatitis | Very rare | Isolated sensitization reports; uncommon for amino acids |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| 2-Hexanediol Humectant/preservative-booster | 1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Polyglyceryl-10 Laurate Emulsifier / surfactant | Polyglyceryl-10 Laurate is a non-ionic ester of polyglycerin and lauric acid used as a gentle emulsifier and mild surfactant in skincare and cosmetic formulations. It helps stabilize oil-in-water systems and can act as a solubilizer or cleansing agent. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Arginine Amino acid / pH adjuster & conditioning agent | Arginine is a basic amino acid used in skincare primarily as a pH buffer/neutralizer and humectant-like conditioning agent that supports skin hydration and barrier function. It is generally well tolerated and often paired with acidic ingredients to balance formulation pH. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Caprylyl Glycol Humectant / skin-conditioning agent and preservative booster | Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active. |
| Disodium Edta Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Ammonium Acryloyldimethyltaurate/Vp Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Maltodextrin Carrier/film-forming agent | Maltodextrin is a polysaccharide derived from starch hydrolysis, used in skincare primarily as a carrier, bulking agent, film former, and stabilizer for active ingredients and powders. It also helps improve texture and can act as a mild thickening or emulsion-stabilizing aid. |
| Hydrolyzed Gardenia Florida Extract Key active Antioxidant/skin-conditioning | Hydrolyzed Gardenia Florida Extract is a botanical-derived ingredient obtained by hydrolyzing extracts of the gardenia plant, used in skincare for its antioxidant and skin-conditioning properties. It is valued for components such as iridoid glycosides and crocetin derivatives that may help support skin barrier and provide soothing effects. |
| Hydrolyzed Hyaluronic Acid Humectant / moisturizer | Hydrolyzed hyaluronic acid is a low-molecular-weight form of hyaluronic acid broken into smaller fragments, allowing better penetration into the skin to bind water and improve hydration. It is widely used in moisturizers and serums to enhance skin moisture content and surface smoothness. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Ceramide Np Skin-barrier replenishing lipid / emollient | Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| 3-Butanediol Humectant/solvent | 3-Butanediol (1,3-butylene glycol) is a small diol commonly used in cosmetics as a humectant, solvent, and mild antimicrobial agent that helps retain moisture and stabilize formulations. It is generally considered safe and well tolerated at typical use concentrations. |
| Hydrogenated Lecithin Emollient / Emulsifier | Hydrogenated lecithin is a phospholipid derived from lecithin through hydrogenation, used in skincare as an emulsifier, emollient, and skin-conditioning agent. It also helps stabilize formulations and form liposomes that can aid delivery of other ingredients. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Cholesterol Skin barrier lipid / emollient | Cholesterol is a naturally occurring lipid found in the skin's stratum corneum that, alongside ceramides and fatty acids, helps maintain the skin barrier and prevent transepidermal water loss. In skincare formulations it functions as an emollient and barrier-repair agent that improves hydration and skin resilience. |
| Ceramide As Skin-barrier lipid / emollient | Ceramide AS is a synthetic sphingolipid that mimics naturally occurring skin ceramides, helping restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations. |
| Ceramide Ap Skin barrier lipid / moisturizer | Ceramide AP (ceramide 6-II) is a naturally occurring sphingolipid that helps restore and maintain the skin's barrier function and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations, often combined with other ceramides, cholesterol, and fatty acids. |
| Ceramide Ns Skin-barrier lipid / emollient | Ceramide NS (formerly Ceramide 2) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Hydroxypropyltrimonium Hyaluronate Humectant / conditioning agent | Hydroxypropyltrimonium Hyaluronate is a cationic (quaternized) modified form of hyaluronic acid that carries a positive charge, improving its substantivity and ability to bind to skin and hair for enhanced moisturization and conditioning. It functions primarily as a humectant and film-forming conditioning agent in cosmetic formulations. |
| Sodium Acetylated Hyaluronate Humectant / moisturizer | Sodium Acetylated Hyaluronate is an acetylated, sodium-salt derivative of hyaluronic acid used in skincare for its enhanced moisture retention and improved skin adherence compared to standard hyaluronic acid. The acetyl modification increases lipophilicity, allowing better surface binding and prolonged hydration. |
| Hyaluronic Acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| Hydrolyzed Sodium Hyaluronate Humectant / hydrating agent | Hydrolyzed sodium hyaluronate is an enzymatically or chemically fragmented, low-molecular-weight form of sodium hyaluronate used in skincare to attract and bind water. Its smaller size allows better penetration into the upper layers of the skin compared to high-molecular-weight hyaluronic acid, supporting surface hydration and a smoother appearance. |
| Sodium Hyaluronate Crosspolymer Humectant / hydrating agent | Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface. |
| Potassium Hyaluronate Humectant / skin-conditioning agent | Potassium hyaluronate is the potassium salt of hyaluronic acid, a glycosaminoglycan that binds water to hydrate the skin and improve surface smoothness. It is commonly used in moisturizers and serums as a hydrating and texture-enhancing ingredient. |
| Ceramide Eop Skin barrier lipid | Ceramide EOP is a long-chain omega-hydroxy ceramide that helps form and maintain the skin's lipid barrier, supporting moisture retention and reducing transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.