Below is every ingredient in Clean Clear Morning Energy Berry Face Wash 50Ml Nld6E Wvrr explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Menthol is a naturally occurring or synthetic compound derived from mint oils that produces a cooling sensation by activating TRPM8 receptors on the skin. It is used in topical products for its soothing, mild analgesic, and antipruritic effects.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Skin dryness or tightness | Uncommon | High sodium salt concentrations (e.g., sodium chloride) can have an osmotic, dehydrating effect on skin. |
| Irritation or stinging | Uncommon | More likely with alkaline sodium hydroxide if pH is not properly neutralized in the final product. |
| Mild transient erythema | Rare | Generally associated with compromised or sensitive skin. |
| Allergic contact dermatitis | Very rare | Sodium salts are not common sensitizers; reactions usually relate to other formula components. |
| Skin dryness or irritation | Common | Can disrupt the skin barrier and strip natural oils, especially at high concentrations or with prolonged contact. |
| Eye irritation/stinging | Common | Reported on direct contact, particularly relevant in shampoos and facial cleansers. |
| Contact dermatitis | Uncommon | Irritant rather than allergic reaction is most typical; sensitivity varies by individual. |
| Exposure to 1,4-dioxane impurity | Rare | A potential trace byproduct of ethoxylation; controlled by manufacturing purification standards. |
| Mild skin irritation or stinging | Common | More likely at higher concentrations or on compromised/sensitive skin |
| Irritant contact dermatitis | Uncommon | Non-allergic irritation, often dose-dependent |
| Worsening of pre-existing eczema or barrier-impaired skin | Rare | Penetration-enhancing effect may increase reactivity |
| Systemic toxicity from topical use | Very rare | Reported mainly with extensive application on broken skin, especially in infants or burn patients |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Sodium pH adjuster / electrolyte | Sodium, typically present in skincare as sodium salts (e.g., sodium chloride, sodium hydroxide, sodium citrate), functions as a pH adjuster, thickener, or osmotic/electrolyte agent rather than a standalone active. It helps stabilize formulations and maintain skin barrier ion balance. |
| Laureth Sulfate Surfactant/cleansing agent | Laureth sulfate (commonly sodium laureth sulfate) is an anionic surfactant used in cleansers, shampoos, and body washes to produce foam and remove oil and dirt. It is an ethoxylated, generally milder alternative to sodium lauryl sulfate. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Acrylates Copolymer Film-former / texture enhancer | Acrylates Copolymer is a synthetic polymer used in skincare and cosmetics primarily as a film-forming agent, viscosity modifier, and to improve product texture and wear. It helps control sebum, provides a smooth feel, and stabilizes formulations. |
| Cocamidopropyl Betaine Surfactant / foaming cleanser | Cocamidopropyl Betaine is an amphoteric surfactant derived from coconut oil and dimethylaminopropylamine, used in cleansers, shampoos, and body washes to provide gentle foaming, viscosity, and to reduce the harshness of stronger anionic surfactants. It is widely regarded as mild but is a recognized contact allergen. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Disodium Edta Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Fragrance Fragrance/masking agent | Fragrance refers to a blend of natural or synthetic aromatic compounds added to skincare products to impart a pleasant scent or mask the odor of other ingredients. It serves a sensory and formulation purpose rather than a therapeutic one. |
| Menthol Key active Cooling agent / counterirritant | Menthol is a naturally occurring or synthetic compound derived from mint oils that produces a cooling sensation by activating TRPM8 receptors on the skin. It is used in topical products for its soothing, mild analgesic, and antipruritic effects. |
| Methyl Lactate Humectant/Solvent | Methyl lactate is an ester of lactic acid used in cosmetic formulations primarily as a solvent, humectant, and skin-conditioning agent. It can act as a mild exfoliant and penetration enhancer at certain concentrations. |
| Cellulose Thickener / absorbent / texturizer | Cellulose is a plant-derived polysaccharide used in skincare as a thickening, stabilizing, and absorbent agent, and in exfoliant or film-forming roles. It is generally inert and well tolerated as a formulation base ingredient. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Ethylhexyl Palmitate Emollient / skin-conditioning agent | Ethylhexyl Palmitate is a lightweight ester of 2-ethylhexanol and palmitic acid used as an emollient, solvent, and texture-enhancer in cosmetics. It imparts a silky, dry feel and is often used as a synthetic substitute for mineral oil or silicones. |
| Jojoba Esters Emollient / skin-conditioning agent | Jojoba Esters are wax esters derived from jojoba oil, used in skincare to soften skin, reduce moisture loss, and improve product texture and spreadability. They are valued for their stability and skin-compatible, non-greasy emollient properties. |
| Microcrystalline Wax Thickener/Emollient | Microcrystalline wax is a refined petroleum-derived wax used in cosmetics to thicken formulations, stabilize emulsions, bind oils, and impart structure to products like balms, sticks, and creams. It functions primarily as a texture and consistency agent rather than a skin-active ingredient. |
| Petrolatum Occlusive emollient/moisturizer | Petrolatum is a semi-solid mixture of hydrocarbons derived from petroleum, widely used as an occlusive agent that forms a protective barrier on the skin to reduce transepidermal water loss. It is considered one of the most effective and inert moisturizing ingredients in dermatology. |
| Hydroxypropyl Methylcellulose Thickener/film-former | Hydroxypropyl Methylcellulose (HPMC) is a semi-synthetic cellulose derivative used in skincare and cosmetics as a thickening agent, emulsion stabilizer, film former, and binder. It is generally considered safe, non-toxic, and non-irritating in topical formulations. |
| Methylchloroisothiazolinone Preservative | Methylchloroisothiazolinone (MCI) is a synthetic isothiazolinone preservative used at very low concentrations to prevent microbial growth in cosmetics and personal care products, often combined with methylisothiazolinone. It is typically restricted to rinse-off products due to its sensitizing potential. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.