Tirabeauty · 🇮🇳 India

First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml

28 ingredients
What's in it

Below is every ingredient in First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
4 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml fungal-acne safe?
Based on its listed ingredients, First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml contains 4 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl Glucoside, Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone, Polysorbate 60, Sorbitan Isostearate. If you are fungal-acne prone, you may want to avoid these.
Does First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml.
Will First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is First Aid Beauty Hydrating Dewy Gel Cream Moisturizer 52 Ml safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Colloidal Oatmeal
Skin protectant / soothing agent

Colloidal oatmeal is finely milled whole oat (Avena sativa) suspended for topical use, recognized as an FDA skin protectant. It contains beta-glucans, avenanthramides, and lipids that help moisturize, support the skin barrier, and reduce itch and inflammation.

Tocopherol
Antioxidant

Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.

Glyceryl Glucoside
Humectant / moisturizer

Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Mild transient stinging or irritationUncommonMore likely at high concentrations or on compromised/broken skin.
Tacky or sticky skin feelCommonA cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations.
Contact dermatitis or allergic reactionRareTrue allergy to glycerin is uncommon; patch-test positivity is infrequent.
Skin dehydration in very low humidityRareIn very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive.
Mild irritation or stingingRareGenerally only with impure formulations or already compromised skin.
Allergic contact dermatitisVery rareIsolated case reports; squalane has very low sensitizing potential.
Acneiform breakouts / clogged poresRareLow comedogenic rating, but acne-prone individuals may occasionally react.
Mild skin irritation or rednessRareGenerally considered non-irritating; occasional mild reactions reported.
Clogged pores / comedogenic-related breakoutsUncommonOften anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well.
Eye irritation on accidental contactRareTransient stinging or discomfort if product enters the eyes.
Skin irritationRareGenerally considered low-irritant; mild irritation reported occasionally, often related to other formulation components.
Acneiform breakouts / pore congestionRareConsidered low comedogenic potential, but occlusive film may contribute in acne-prone individuals.
Eye irritationRarePossible mild stinging or irritation upon direct ocular contact.
Redness or tinglingRareTypically resolves quickly after discontinuation

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Squalane
Emollient / occlusive moisturizer
Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Phenyl Trimethicone
Silicone emollient/conditioning agent
Phenyl Trimethicone is a phenyl-substituted silicone used in skincare and cosmetics to impart a smooth, silky feel, add shine, and provide water-repellent film-forming and conditioning properties. It functions as a formulation/base ingredient rather than a treatment active.
Betaine
Humectant / osmolyte
Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Pentylene Glycol
Humectant / solvent / preservative-booster
Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients.
Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone
Emulsifier
Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone is a silicone-based polyglyceryl emulsifier used to stabilize water-in-silicone (W/Si) emulsions, commonly found in cosmetic foundations, sunscreens, and other emulsified formulations. It helps disperse the water phase within silicone oils, contributing to a smooth, lightweight skin feel.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Ceramide Np
Skin-barrier replenishing lipid / emollient
Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations.
Colloidal Oatmeal Key active
Skin protectant / soothing agent
Colloidal oatmeal is finely milled whole oat (Avena sativa) suspended for topical use, recognized as an FDA skin protectant. It contains beta-glucans, avenanthramides, and lipids that help moisturize, support the skin barrier, and reduce itch and inflammation.
Tocopherol Key active
Antioxidant
Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.
Sorbitan Isostearate
Emulsifier / surfactant
Sorbitan isostearate is a sorbitan ester of isostearic acid used as a nonionic emulsifier and stabilizer in oil-in-water and water-in-oil cosmetic formulations. It helps blend oil and water phases and improves texture and spreadability.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Sodium Acryloyldimethyltaurate/Vp Crosspolymer
Thickener / stabilizer
Sodium Acryloyldimethyltaurate/VP Crosspolymer is a synthetic crosslinked copolymer used as a rheology modifier, emulsion stabilizer, and gelling agent in skincare formulations. It helps provide consistent texture and viscosity rather than delivering a biological skin benefit.
Caprylyl Glycol
Humectant / skin-conditioning agent and preservative booster
Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Dimethicone/Polyglycerin-3 Crosspolymer
Emulsifier/texture enhancer
Dimethicone/Polyglycerin-3 Crosspolymer is a silicone-based crosspolymer used in cosmetic formulations as an emulsifier, thickening agent, and skin-conditioning ingredient that improves texture and spreadability. It helps stabilize emulsions and impart a smooth, non-greasy feel.
Glyceryl Glucoside Key active
Humectant / moisturizer
Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function.
Dimethiconol
Emollient/silicone conditioning agent
Dimethiconol is a silicone-based polymer used in skincare and haircare to provide smoothing, conditioning, and a soft, non-greasy emollient feel. It forms a thin, breathable film that reduces moisture loss and improves spreadability of formulations.
Polysilicone-11
Film-former / texturizer
Polysilicone-11 is a silicone-based crosslinked polymer used in cosmetics to form a smooth, flexible film on the skin, providing mattifying, blurring, and texture-improving effects. It is commonly found in primers, foundations, and sunscreens as a formulation ingredient rather than a treatment active.
2-Hexanediol
Humectant/preservative-booster
1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active.
Hydroxyacetophenone
Antioxidant / soothing agent
Hydroxyacetophenone (acetophenone-based compound, often 4'-hydroxyacetophenone) is used in skincare primarily as an antioxidant and skin-conditioning agent that can also enhance the stability and efficacy of preservative systems. It is valued for its soothing properties and helps neutralize free radicals while reducing potential irritation from other formulation components.
Hexylene Glycol
Solvent / humectant
Hexylene glycol is a small glycol used in cosmetic formulations primarily as a solvent, viscosity-reducer, and mild humectant. It helps dissolve other ingredients and improve product texture rather than providing a direct therapeutic skin benefit.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Polysorbate 60
Emulsifier / surfactant
Polysorbate 60 is a nonionic surfactant and emulsifier derived from sorbitol and stearic acid, used to blend oil and water phases and stabilize emulsions in creams and lotions. It functions as a formulation aid rather than a therapeutic active.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →