Below is every ingredient in Lakme Vitamin C Night Cream 50G Wwbqttnzx1G explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Alpha bisabolol is a naturally occurring monocyclic sesquiterpene alcohol, derived chiefly from chamomile, used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also valued for its low irritancy and ability to enhance the penetration of other ingredients.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Skin dryness from oil absorption | Uncommon | May occur with frequent use on already dry skin due to its absorbent properties. |
| Mild skin or eye irritation | Rare | Loose powder particles can cause transient irritation, particularly around the eyes. |
| Respiratory irritation from inhalation of powder | Uncommon | Inhaling airborne particles during application of loose powders can irritate the respiratory tract. |
| Contact dermatitis or allergic reaction | Very rare | Rarely reported; cosmetic-grade talc is generally well tolerated on intact skin. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
| Allergic contact dermatitis | Very rare | Documented in isolated case reports; true sensitization is unusual. |
| Mild skin irritation | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Contact allergy/sensitization | Very rare | Silicones are low-allergenicity; documented allergic reactions are exceptional. |
| Eye irritation | Rare | Possible transient stinging if product enters the eyes. |
| Skin dryness | Uncommon | Its absorbent nature may contribute to dryness in some individuals with already dry skin. |
| Mild irritation or redness | Rare | Occasional sensitivity reactions reported, generally mild. |
| Contact dermatitis | Very rare | Allergic reactions are uncommon; generally considered low-risk and well tolerated. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Hydrated Magnesium Silicate Absorbent / bulking agent (talc) | Hydrated magnesium silicate, commonly known as talc, is a naturally occurring mineral used in cosmetics and skincare as an absorbent, anti-caking, bulking, and texture-enhancing agent. It helps absorb moisture and oil, improves slip, and provides a smooth, mattifying feel in powders and creams. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Aluminium Starch Octenylsuccinate Absorbent/Anti-caking agent | Aluminium Starch Octenylsuccinate is a modified starch derivative used in cosmetics primarily to absorb oil and moisture, improve skin feel, and act as a thickening or anti-caking agent. It helps create a smooth, matte, powdery texture in formulations such as powders, antiperspirants, and creams. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Liquidum Paraffinum Emollient/occlusive | Liquidum Paraffinum (liquid paraffin/mineral oil) is a highly refined, colorless petroleum-derived oil used in skincare as an occlusive emollient that reduces transepidermal water loss and softens the skin. It is widely used in moisturizers, cleansers, and ointments as a base ingredient due to its stability and low reactivity. |
| Dicaprylyl Ether Emollient/Skin-conditioning agent | Dicaprylyl ether is a lightweight, fast-spreading emollient derived from caprylic alcohol, used to improve skin feel and reduce greasiness in formulations. It functions as a non-occlusive carrier and texture enhancer rather than a treatment active. |
| Glycerine Humectant | Glycerine (glycerol) is a humectant that draws water into the stratum corneum and helps maintain skin hydration and barrier function. It is widely used as a base/formulation ingredient in moisturizers, cleansers, and serums. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Isopropyl Myristate Emollient / skin-conditioning agent | Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products. |
| Isopentyldiol Humectant / solvent | Isopentyldiol is a low-molecular-weight diol used in cosmetics as a humectant, solvent, and mild antimicrobial-boosting agent that improves the texture and stability of formulations. It also enhances penetration of other ingredients and contributes a light, non-greasy skin feel. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| PEG-75 Stearate Emulsifier/surfactant | PEG-75 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic emulsifier, surfactant, and emollient in skincare and cosmetic formulations. It helps blend oil and water phases and improves product texture. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Ceteth-20 Surfactant/emulsifier | Ceteth-20 is a polyethylene glycol (PEG) ether of cetyl alcohol used as a nonionic surfactant, emulsifier, and solubilizer to stabilize oil-in-water formulations. It helps blend water and oil phases and improve product texture rather than providing a therapeutic skin benefit. |
| Steareth-20 Emulsifier / surfactant | Steareth-20 is a polyethylene glycol ether of stearyl alcohol used as a nonionic emulsifier and surfactant to blend oil and water phases and stabilize creams and lotions. It functions as a formulation aid rather than a treatment active. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Dimethicone Crosspolymer Silicone-based texture enhancer/film former | Dimethicone Crosspolymer is a crosslinked silicone polymer used in skincare and cosmetics to provide a smooth, silky feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation ingredient rather than a therapeutic active. |
| Dicetyl Phosphate Emulsifier / co-emulsifier | Dicetyl Phosphate is an anionic phosphate ester used in cosmetic formulations primarily as an emulsifier and stabilizer, often paired with Ceteth-10 Phosphate to form oil-in-water emulsions. It helps maintain emulsion stability and texture rather than providing a direct skin treatment effect. |
| Ceteth-10 Phosphate Emulsifier / surfactant | Ceteth-10 Phosphate is a phosphate ester of ethoxylated cetyl alcohol used primarily as an oil-in-water emulsifier and surfactant in creams, lotions, and sunscreens. It helps stabilize formulations and improve texture rather than providing a direct therapeutic effect on the skin. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Alpha Bisabolol Key active Soothing agent | Alpha bisabolol is a naturally occurring monocyclic sesquiterpene alcohol, derived chiefly from chamomile, used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also valued for its low irritancy and ability to enhance the penetration of other ingredients. |
| BHT Antioxidant/preservative | BHT (butylated hydroxytoluene) is a synthetic phenolic antioxidant used in small amounts to prevent oxidation and rancidity of oils, fragrances, and other unstable components, helping maintain product stability and shelf life. |
| Perfume Fragrance | Perfume (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a desired scent or to mask the base odor of other ingredients. It serves a sensory and formulation role rather than a skin-treating function. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Diamond Powder Exfoliant / luxury abrasive | Diamond powder is a finely milled inert mineral used in skincare primarily as a physical exfoliant and light-reflecting agent to give skin a smoother appearance and subtle radiance. It has no biochemical activity and functions mechanically rather than as a treatment active. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Polymethylsilsesquioxane Texture enhancer / mattifying agent | Polymethylsilsesquioxane is a silicone-based spherical powder used in skincare and cosmetics to impart a smooth, soft-focus, mattifying feel and improve spreadability. It is a formulation/texture ingredient rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Methyl Paraben Preservative | Methylparaben is a widely used antimicrobial preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at low concentrations as a base/formulation ingredient rather than a treatment active. |
| Propylparaben Preservative | Propylparaben is a paraben-class antimicrobial preservative used to inhibit the growth of bacteria, mold, and yeast in cosmetic and personal care formulations. It is typically used at low concentrations alongside other parabens for broad-spectrum preservation. |
| Butylphenyl Methylpropional Fragrance/synthetic fragrance ingredient | Butylphenyl Methylpropional (also known as Lilial) is a synthetic fragrance compound historically used to impart a floral, lily-of-the-valley scent to cosmetics and personal care products. It has been restricted or banned in some markets (e.g., the EU) due to safety concerns regarding skin sensitization and reproductive toxicity. |
| Benzyl Salicylate Fragrance/UV-absorber | Benzyl salicylate is an aromatic ester used primarily as a fragrance ingredient and, to a lesser extent, as a UV-light absorber in cosmetic formulations. It imparts a faint floral, balsamic scent and helps stabilize fragrance compositions. |
| Linalool Fragrance/masking agent | Linalool is a naturally occurring terpene alcohol found in lavender, coriander, and many other plants, used in skincare primarily as a fragrance component. It readily oxidizes upon exposure to air, forming sensitizing hydroperoxides. |
| Citronellol Fragrance ingredient | Citronellol is a naturally occurring monoterpene alcohol used as a fragrance and flavoring agent, providing a rose-like, citrusy scent in cosmetics and personal care products. It is found in essential oils such as rose, geranium, and citronella. |
| Benzyl Acetate Fragrance/flavoring agent | Benzyl acetate is an aromatic ester used primarily as a fragrance component in cosmetics and personal care products, valued for its sweet, floral (jasmine-like) scent. It serves a sensory and masking role rather than providing skin-treatment benefits. |
| Hexyl Cinnamal Fragrance ingredient | Hexyl Cinnamal is a synthetic aromatic compound used as a fragrance and masking agent in cosmetic and skincare formulations, valued for its mild floral, jasmine-like scent. It is one of the 26 fragrance allergens required to be labeled in the EU. |
| Alpha-Isomethyl Ionone Fragrance ingredient | Alpha-Isomethyl Ionone is a synthetic fragrance compound with a sweet, violet-like floral scent used to impart or enhance aroma in cosmetic and skincare formulations. It has no therapeutic skin benefit and serves purely an olfactory/sensory role. |
| Limonene Fragrance/solvent | Limonene is a naturally occurring monoterpene derived from citrus peel oils, commonly used as a fragrance component and solvent in cosmetic formulations. On exposure to air it oxidizes, forming compounds with greater sensitizing potential. |
| Geraniol Fragrance/aroma compound | Geraniol is a naturally occurring terpene alcohol used in cosmetics primarily as a fragrance ingredient and for its pleasant rose-like scent. It also has mild antioxidant and antimicrobial properties but is included mainly for olfactory rather than therapeutic purposes. |
| Linalyl Acetate Fragrance/masking agent | Linalyl acetate is a naturally occurring ester (found in lavender and bergamot oils) used primarily as a fragrance and scent-masking component in cosmetic formulations. It contributes a floral, sweet aroma but offers no established active skincare benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.