Below is every ingredient in Moody 7D Hydro Burst 100Hr Gel Face Moisturizer 50 G explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Allergic contact dermatitis | Rare | Localized redness, itching, or rash, more likely in individuals sensitized to plants of the Liliaceae family. |
| Mild stinging or burning on application | Uncommon | Usually transient, more common on broken or irritated skin. |
| Skin irritation or dryness | Uncommon | Can occur with certain preparations or due to preservatives in the formulation rather than aloe itself. |
| Delayed wound healing | Very rare | Reported in isolated cases on surgical or deep wounds; not typical for routine cosmetic use. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild skin irritation | Rare | Occasional transient redness or discomfort, typically in sensitive skin. |
| Comedogenicity (pore clogging) | Uncommon | May contribute to breakouts in acne-prone individuals depending on formulation. |
| Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
| Contact irritation | Rare | Mild redness or stinging reported in sensitive skin, generally transient. |
| Comedogenicity (pore-clogging) | Uncommon | May contribute to clogged pores or breakouts in acne-prone or oily skin, though shea is generally low on the comedogenic scale. |
| Skin irritation or redness | Rare | Occasional mild irritation, often related to impurities in unrefined products or individual sensitivity. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aloe Barbadensis (Aloevera) Leaf Juice Soothing/humectant | Aloe Barbadensis leaf juice is a plant-derived gel commonly used in skincare for its hydrating, soothing, and emollient properties. It contains polysaccharides, vitamins, and amino acids that support skin moisturization and barrier comfort. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Isodecyl Neopentanoate Emollient/skin-conditioning agent | Isodecyl Neopentanoate is a lightweight ester emollient used to soften skin and improve spreadability and texture in cosmetic formulations. It imparts a dry, silky feel and serves as a base ingredient rather than a treatment active. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Cocos Nucifera (Coconut) Fruit Extract Emollient/skin conditioning agent | Cocos Nucifera (Coconut) Fruit Extract is a plant-derived ingredient used in skincare for its emollient, moisturizing, and skin-conditioning properties, helping to soften skin and support the lipid barrier. It also contains fatty acids and antioxidants that may offer mild soothing benefits. |
| Butyrospermum Parkii (Shea) Butter Emollient / occlusive moisturizer | Butyrospermum Parkii (Shea) Butter is a plant-derived fat extracted from the nuts of the African shea tree, rich in triglycerides and unsaponifiables. It is widely used in skincare to soften, smooth, and condition the skin while forming an occlusive barrier that reduces water loss. |
| Dicaprylyl Carbonate Emollient / texture enhancer | Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Hydrolyzed Hyaluronic Acid Humectant / moisturizer | Hydrolyzed hyaluronic acid is a low-molecular-weight form of hyaluronic acid broken into smaller fragments, allowing better penetration into the skin to bind water and improve hydration. It is widely used in moisturizers and serums to enhance skin moisture content and surface smoothness. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Polyacrylate-13 Rheology modifier / thickener | Polyacrylate-13 is a synthetic acrylate copolymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create stable gels and emulsions and improves product texture without contributing to active treatment effects. |
| Poly Iso Butene Emollient / film-former | Polyisobutene (often hydrogenated) is a synthetic hydrocarbon polymer used in cosmetics as an emollient, thickener, and film-forming agent that imparts smooth, glossy texture and helps stabilize formulations. It is widely used in lip products, sunscreens, and skincare as a non-active base ingredient. |
| C14-22 Alcohol Emulsifier / co-emulsifier | C14-22 Alcohol is a blend of fatty alcohols (carbon chain lengths C14 to C22) used in cosmetic formulations to stabilize emulsions and improve texture. It is often paired with C12-20 Alkyl Glucoside as a naturally derived emulsifying system. |
| C12-20 Alkyl Glucoside Emulsifier / surfactant | C12-20 Alkyl Glucoside is a non-ionic, sugar-derived (glucose plus fatty alcohol) emulsifier and mild surfactant used to stabilize oil-in-water emulsions and improve texture. It is generally well tolerated and considered gentle, often used in formulations marketed for sensitive skin. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Ceteareth-20 Emulsifier/surfactant | Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.