Below is every ingredient in Sulwhasoo Uv Daily Essential Sunscreen 50 Ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Nano-sized titanium dioxide is an inorganic UV filter that scatters and absorbs primarily UVB and short UVA radiation, providing broad-spectrum sun protection. The reduced particle size minimizes the white cast associated with conventional titanium dioxide while maintaining photoprotection.
Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Mild skin irritation | Uncommon | Transient stinging or redness, more likely on compromised or sensitive skin. |
| Allergic contact dermatitis | Rare | Sensitization is infrequent; propanediol is generally considered low-risk for allergy. |
| Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Photoallergic reaction | Very rare | Uncommon given its photostability, but possible in sensitive individuals. |
| Contact irritation or stinging | Uncommon | Mild transient irritation, especially around the eyes or on sensitive skin. |
| Photoallergic/photocontact reaction | Rare | Reaction triggered by sun exposure after application. |
| Potential endocrine activity | Very rare | Weak estrogenic effects observed in laboratory/animal studies; human clinical relevance at typical use levels remains under regulatory review. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Homosalate Key active UV filter (sunscreen) | Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Squalane Emollient / occlusive moisturizer | Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Titanium Dioxide (Nano) Key active UV filter (mineral sunscreen) | Nano-sized titanium dioxide is an inorganic UV filter that scatters and absorbs primarily UVB and short UVA radiation, providing broad-spectrum sun protection. The reduced particle size minimizes the white cast associated with conventional titanium dioxide while maintaining photoprotection. |
| Terephthalylidene Dicamphor Sulfonic Acid Key active UV filter (sunscreen) | Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage. |
| Potassium Cetyl Phosphate Emulsifier | Potassium Cetyl Phosphate is an anionic emulsifier and surfactant used in oil-in-water formulations to stabilize emulsions and improve texture. It is considered a formulation/base ingredient rather than a treatment active. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Diisopropyl Sebacate Emollient / solvent | Diisopropyl sebacate is an ester used as a lightweight emollient and solvent in cosmetic formulations, providing skin conditioning and improving the spreadability and penetration of other ingredients. It imparts a smooth, non-greasy feel and can act as a vehicle for active compounds. |
| 2-Hexanediol Humectant/preservative-booster | 1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active. |
| Tromethamine pH adjuster / buffering agent | Tromethamine (trometamol, TRIS) is an organic amine base used in cosmetic and topical formulations to neutralize acidic components and stabilize pH. It functions primarily as a buffering and neutralizing agent rather than as a therapeutic active. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Ammonium Acryloyldimethyltaurate/Vp Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Dimethicone/Vinyl Dimethicone Crosspolymer Silicone elastomer / texture enhancer | Dimethicone Vinyl Dimethicone Crosspolymer is a crosslinked silicone elastomer used in skincare and cosmetics to impart a silky, smooth feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation/sensory agent rather than a biologically active treatment ingredient. |
| Aluminum Stearate Emulsion stabilizer / viscosity-increasing agent | Aluminum stearate is the aluminum salt of stearic acid used in cosmetics as a thickener, emulsion stabilizer, and anti-caking agent. It helps adjust texture and consistency in creams, lotions, and color cosmetics rather than providing a therapeutic skin benefit. |
| Polyhydroxystearic Acid Dispersant/emulsifier | Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Polyacrylate-13 Rheology modifier / thickener | Polyacrylate-13 is a synthetic acrylate copolymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create stable gels and emulsions and improves product texture without contributing to active treatment effects. |
| Fragrance / Parfum Fragrance/sensory additive | Fragrance (parfum) is a blend of natural or synthetic aromatic compounds added to cosmetic and skincare products to impart scent or mask the base odor of other ingredients. It provides no therapeutic skin benefit and is included purely for sensory or marketing purposes. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Limonene Fragrance/solvent | Limonene is a naturally occurring monoterpene derived from citrus peel oils, commonly used as a fragrance component and solvent in cosmetic formulations. On exposure to air it oxidizes, forming compounds with greater sensitizing potential. |
| Alumina Abrasive/opacifying agent | Alumina (aluminum oxide) is a fine, hard mineral powder used in skincare and cosmetics primarily as a physical exfoliant in microdermabrasion products and as a bulking, opacifying, or anticaking agent in formulations. It is largely inert and not absorbed through intact skin. |
| Polyisobutene Emollient/film-former | Polyisobutene is a synthetic hydrocarbon polymer used in cosmetics as an emollient, thickener, and film-forming agent that imparts smooth texture, adhesion, and improved spreadability. It is commonly found in long-wear makeup, lip products, and sunscreens to enhance water resistance and product longevity. |
| Scutellaria Baicalensis Root Extract Key active Antioxidant / soothing botanical | Scutellaria Baicalensis Root Extract is a plant-derived ingredient rich in flavonoids such as baicalin, baicalein, and wogonin, valued in skincare for its antioxidant, anti-inflammatory, and skin-soothing properties. It is commonly used to help calm irritation and protect skin against environmental oxidative stress. |
| Disodium Edta Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Adenosine Key active Anti-aging/soothing active | Adenosine is a nucleoside that signals through cell-surface receptors to promote dermal fibroblast activity and collagen/elastin production, helping reduce the appearance of fine lines and wrinkles. It also has anti-inflammatory and soothing properties at low concentrations commonly used in cosmetics (around 0.04-0.1%). |
| Prunus Mume Fruit Extract Key active Antioxidant/skin-conditioning | Prunus Mume Fruit Extract is derived from the Japanese apricot (ume) fruit and is used in skincare for its antioxidant, soothing, and skin-conditioning properties, attributed to its content of organic acids, polyphenols, and flavonoids. It is often included to help protect against oxidative stress and support skin tone and texture. |
| Morus Alba Root Extract Key active Skin-brightening / antioxidant | Morus Alba (white mulberry) Root Extract is a botanical ingredient valued for its arbutin and flavonoid content, which inhibit tyrosinase activity to reduce melanin production. It is commonly used in formulations targeting hyperpigmentation, uneven tone, and dark spots, and also offers antioxidant benefits. |
| Linalool Fragrance/masking agent | Linalool is a naturally occurring terpene alcohol found in lavender, coriander, and many other plants, used in skincare primarily as a fragrance component. It readily oxidizes upon exposure to air, forming sensitizing hydroperoxides. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Sorbitan Isostearate Emulsifier / surfactant | Sorbitan isostearate is a sorbitan ester of isostearic acid used as a nonionic emulsifier and stabilizer in oil-in-water and water-in-oil cosmetic formulations. It helps blend oil and water phases and improves texture and spreadability. |
| Polymethyl Methacrylate Filler / texturizing agent | Polymethyl methacrylate (PMMA) is a synthetic acrylic polymer used in cosmetics as spherical microbeads or particles to improve texture, provide a smooth, soft-focus finish, and aid in oil absorption and even coverage. In dermal fillers it is used as non-biodegradable microspheres for soft tissue augmentation. |
| Panax Ginseng Root Extract Key active Antioxidant / skin-conditioning | Panax Ginseng Root Extract is a botanical extract rich in ginsenosides and polysaccharides used in skincare for its antioxidant, anti-inflammatory, and circulation-supporting properties. It is often included to promote a brighter, more revitalized appearance and to help defend against oxidative stress. |
| Citronellol Fragrance ingredient | Citronellol is a naturally occurring monoterpene alcohol used as a fragrance and flavoring agent, providing a rose-like, citrusy scent in cosmetics and personal care products. It is found in essential oils such as rose, geranium, and citronella. |
| Citral Fragrance/aroma ingredient | Citral is a naturally occurring aldehyde found in citrus and lemongrass oils, used in cosmetics primarily for its fresh, lemon-like scent. It is a recognized fragrance allergen rather than a treatment active. |
| Thymol Trimethoxycinnamate Key active UV filter / antioxidant | Thymol trimethoxycinnamate is a cinnamate-derived compound studied for UV-absorbing and antioxidant properties, combining a thymol moiety with a trimethoxycinnamic acid structure. It is investigated mainly as a photoprotective or stabilizing agent in topical formulations. |
| Geraniol Fragrance/aroma compound | Geraniol is a naturally occurring terpene alcohol used in cosmetics primarily as a fragrance ingredient and for its pleasant rose-like scent. It also has mild antioxidant and antimicrobial properties but is included mainly for olfactory rather than therapeutic purposes. |
| Benzyl Benzoate Fragrance/Preservative/Solvent | Benzyl benzoate is a naturally occurring ester used in cosmetics as a fragrance component, solvent, plasticizer, and fixative; it also has antimicrobial and acaricidal properties. In medicine it is used as a topical treatment for scabies and lice. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Morus Alba Fruit Extract Key active Antioxidant / brightening | Morus Alba Fruit Extract is derived from white mulberry fruit and is used in skincare for its antioxidant content and tyrosinase-inhibiting compounds, which may help reduce hyperpigmentation and brighten skin tone. It also provides anti-inflammatory and free-radical scavenging benefits. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.