Below is every ingredient in The Derma Co Oil Free Daily Face Moisturizer 100G explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Transient skin tightness or dryness | Uncommon | May occur in low-humidity environments where the ingredient can draw moisture from deeper skin layers if not sealed with an occlusive. |
| Mild irritation, redness, or stinging | Uncommon | Often related to other formulation components or compromised skin barrier rather than hyaluronic acid itself. |
| Allergic contact dermatitis | Rare | Reported infrequently; true hypersensitivity to topical hyaluronic acid is unusual. |
| Hypersensitivity reactions with injectable forms | Rare | Pertains to dermal filler use rather than topical application; includes swelling or nodule formation. |
| Mild irritation or stinging | Rare | Usually attributable to other formulation components rather than ceramides themselves. |
| Clogged pores or breakouts | Rare | More related to occlusive or comedogenic base ingredients in the formulation than to ceramides. |
| Mild skin irritation | Rare | Possible at higher concentrations, usually transient. |
| Enhanced penetration of other ingredients | Uncommon | By disrupting skin barrier it may slightly increase absorption of co-applied substances. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild transient irritation or redness | Rare | Generally well tolerated; reactions are uncommon and usually mild. |
| Contact allergy / sensitization | Very rare | Polysaccharide gums are low-risk allergens, but isolated hypersensitivity is theoretically possible. |
| Stinging on compromised skin | Rare | May occur on broken or highly sensitive skin, often formulation-dependent. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Hyaluronic acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| ceramides Skin barrier-restoring lipid | Ceramides are naturally occurring lipids that make up a major component of the skin's outermost barrier, helping to retain moisture and protect against environmental damage. In skincare, they are added to replenish depleted lipids and support barrier function, particularly in dry or compromised skin. |
| Disodium Edta Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Zigamoist Pm Ii (Hydrolyzed Sclerotium Gum) Humectant / texture enhancer | Hydrolyzed Sclerotium Gum is a polysaccharide derived from the fungus Sclerotium rolfsii that acts as a film-forming humectant and natural thickener, helping to bind water and improve skin hydration and product feel. It is primarily used to support moisturization and stabilize emulsions rather than to treat specific skin conditions. |
| Zigamoist Ha (Sodium Hyaluronate) Humectant / hydrating agent | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that binds and retains water in the skin. It is widely used in skincare to improve surface hydration and temporarily plump the skin's appearance. |
| Ginomol St (Cocoalkanes Emollient | Cocoalkanes (often blended in products like Ginomol St) is a coconut-derived hydrocarbon emollient used to provide a lightweight, non-greasy skin feel and spreadability in cosmetic formulations. It functions as a skin-conditioning agent and solvent rather than a therapeutic active. |
| Coco Caprylate Caprate) Emollient / skin-conditioning ester | Coco-Caprylate/Caprate is a lightweight ester derived from coconut-based fatty alcohols and caprylic/capric acids, used as a natural-origin emollient that imparts a dry, silky skin feel. It functions as a spreading agent and silicone alternative in lotions, creams, and sunscreens. |
| Ginol Ew 6820 (Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a blend of fatty alcohols (cetyl and stearyl) used as an emollient, emulsion stabilizer, and thickening agent in cosmetic formulations. It helps soften skin and maintain the texture and stability of creams and lotions. |
| Ceteareth-20) Emulsifier/surfactant | Ceteareth-20 is a nonionic surfactant and emulsifier derived from cetearyl alcohol ethoxylated with about 20 units of ethylene oxide, used to stabilize oil-in-water emulsions and solubilize ingredients in creams, lotions, and cleansers. It is a formulation/base ingredient rather than a treatment active. |
| Arlacel 165 (Glyceryl Stearate Emulsifier / emollient | Arlacel 165 (Glyceryl Stearate and PEG-100 Stearate) is a self-emulsifying blend used to create stable oil-in-water emulsions in creams and lotions, also providing emollient and skin-conditioning properties. It functions as a formulation base ingredient rather than an active treatment agent. |
| Peg-100 Stearate) Emulsifier / surfactant | PEG-100 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic emulsifier and surfactant to blend oil and water phases in creams and lotions. It helps stabilize emulsions and improve texture rather than providing a therapeutic skin effect. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Ds Dihydroceramide 50 (Ceramide 3 Skin barrier lipid / moisturizing emollient | Ceramide 3 (also known as ceramide NP or dihydroceramide variants) is a naturally occurring sphingolipid used in skincare to replenish the skin's intercellular lipid matrix, supporting barrier function and reducing transepidermal water loss. It is considered a barrier-repair and moisturizing ingredient rather than a chemically corrective active. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Ceteareth-20 Emulsifier/surfactant | Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active. |
| Polyglycaeryl-10-Stearate Glycerin Emulsifier / surfactant | Polyglyceryl-10 stearate combined with glycerin is a non-ionic, polyglycerol-based emulsifier and surfactant used to blend oil and water phases in skincare formulations. It also contributes mild humectant and skin-conditioning properties via the glycerin component. |
| 2-Hexanediol Water) Humectant / Preservative-booster | 1,2-Hexanediol is a glycol commonly used in skincare as a humectant and solvent that also provides preservative-boosting and mild antimicrobial properties, helping stabilize formulations. When combined with water it functions primarily as part of the formulation base rather than as a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.