Below is every ingredient in Bellavita Glowrious 3-in-1 Tinted Strobe Cream with SPF 30 PA++++ | 30 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Allergic contact dermatitis | Rare | Uncommon sensitization reactions reported, sometimes linked to benzoate component. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Photoallergic reaction | Very rare | Uncommon given its photostability, but possible in sensitive individuals. |
| Contact irritation | Rare | Mild redness or stinging occasionally reported, generally well tolerated. |
| Mild skin irritation | Uncommon | Transient stinging or redness, more likely on compromised or sensitive skin. |
| Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
| Contact dermatitis / skin irritation | Rare | Occasional reports of mild irritation or redness in sensitive individuals. |
| Stinging or eye irritation | Rare | May occur if product migrates into the eyes, generally formulation-related. |
| Acneiform breakouts / clogged pores | Rare | Possible in acne-prone individuals due to its lipid content. |
| Eye irritation | Uncommon | Can cause irritation on direct ocular contact, relevant for facial or eye-area products. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Phenethyl Alcohol Preservative / fragrance | Phenethyl alcohol is an aromatic alcohol used in cosmetics primarily as a preservative and antimicrobial agent, and sometimes as a fragrance component with a mild rose-like scent. It is often combined with other preservatives to broaden antimicrobial coverage. |
| Hydroxyacetophenone Antioxidant / soothing agent | Hydroxyacetophenone (acetophenone-based compound, often 4'-hydroxyacetophenone) is used in skincare primarily as an antioxidant and skin-conditioning agent that can also enhance the stability and efficacy of preservative systems. It is valued for its soothing properties and helps neutralize free radicals while reducing potential irritation from other formulation components. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Cyclomethicone Emollient/silicone solvent | Cyclomethicone is a volatile cyclic silicone used in skincare and cosmetics to impart a smooth, silky feel and aid spreadability before evaporating without residue. It functions as a carrier and emollient rather than an active treatment ingredient. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| PEG-10 Dimethicone Silicone-based emulsifier/conditioning agent | PEG-10 Dimethicone is a water-dispersible, PEG-modified silicone used in cosmetics as an emulsifier, surfactant, and skin-conditioning agent that imparts a smooth, silky feel and helps stabilize emulsions. It is considered a formulation/base ingredient rather than a therapeutic active. |
| Polymethyl Methacrylate Filler / texturizing agent | Polymethyl methacrylate (PMMA) is a synthetic acrylic polymer used in cosmetics as spherical microbeads or particles to improve texture, provide a smooth, soft-focus finish, and aid in oil absorption and even coverage. In dermal fillers it is used as non-biodegradable microspheres for soft tissue augmentation. |
| Isopropyl Palmitate Emollient / Thickener | Isopropyl Palmitate is an ester of isopropyl alcohol and palmitic acid used as an emollient, skin-conditioning agent, and texture enhancer that improves spreadability and reduces greasiness in creams, lotions, and cosmetics. It is a formulation/base ingredient rather than a therapeutic active. |
| Isopropyl Myristate Emollient / skin-conditioning agent | Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Hyaluronic Acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Mica Colorant/opacifying agent | Mica is a naturally occurring silicate mineral used in cosmetics as a colorant and light-reflecting pigment to add shimmer, opacity, and a smooth feel to formulations. It is considered inert and is widely used in makeup, sunscreens, and skincare products. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.