Below is every ingredient in Anti-Age Bxl Cellular Protection Cream Spf 40 Uva/Uvb Sunscreen 50G explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum UVA and UVB protection through absorption, reflection, and scattering. In nano form it is micronized to improve dispersion and photoprotective efficiency in sunscreen formulations.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Allergic contact dermatitis | Rare | Uncommon sensitization reactions reported, sometimes linked to benzoate component. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Contact dermatitis / skin irritation | Uncommon | Localized redness, itching, or stinging on application. |
| Photoallergic contact dermatitis | Rare | Reported particularly in adults, sometimes linked to prior ketoprofen sensitization. |
| Systemic absorption | Common | Detectable in blood after use; clinical significance unclear and not equated with harm. |
| Benzophenone formation over time | Uncommon | Degradation can yield trace benzophenone; relevance to skin health under study. |
| Contact allergic reaction (allergic contact dermatitis) | Rare | Avobenzone is a recognized but uncommon cause of sunscreen allergy. |
| Photoallergic or photocontact dermatitis | Rare | Reactions triggered or worsened by sun exposure have been reported. |
| Skin irritation, redness, or stinging | Uncommon | Mild transient irritation may occur, particularly on sensitive or broken skin. |
| Eye irritation | Uncommon | Can cause stinging if the product migrates into the eyes. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (Nano) Key active UV filter (broad-spectrum sunscreen) | Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum UVA and UVB protection through absorption, reflection, and scattering. In nano form it is micronized to improve dispersion and photoprotective efficiency in sunscreen formulations. |
| Polyglyceryl-3 Methylglucose Distearate Emulsifier | Polyglyceryl-3 Methylglucose Distearate is a non-ionic, plant-derived emulsifier composed of glycerin, glucose and stearic acid, used to create stable oil-in-water emulsions in creams and lotions. It is valued for its mildness and skin compatibility, often used in natural and sensitive-skin formulations. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Tribehenin Emollient/emulsifier | Tribehenin is the triester of glycerin and behenic acid (a long-chain fatty acid) used in cosmetics as a skin-conditioning emollient, emulsion stabilizer, and viscosity-increasing agent. It helps soften skin and improve the texture and spreadability of creams and lotions. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Diethylhexyl Butamido Triazone Key active UVB filter (sunscreen agent) | Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Potassium Cetyl Phosphate Emulsifier | Potassium Cetyl Phosphate is an anionic emulsifier and surfactant used in oil-in-water formulations to stabilize emulsions and improve texture. It is considered a formulation/base ingredient rather than a treatment active. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
| Mica Colorant/opacifying agent | Mica is a naturally occurring silicate mineral used in cosmetics as a colorant and light-reflecting pigment to add shimmer, opacity, and a smooth feel to formulations. It is considered inert and is widely used in makeup, sunscreens, and skincare products. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Methylparaben Preservative | Methylparaben is a paraben-class antimicrobial preservative widely used in cosmetics and skincare to prevent microbial growth and extend product shelf life. It is effective primarily against fungi and yeasts, often combined with other parabens for broader protection. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Actinidia Chinensis Fruit Water Skin conditioning / humectant | Actinidia Chinensis (kiwi) Fruit Water is the aqueous fraction derived from kiwifruit, used in cosmetics primarily as a water-based solvent and skin-conditioning agent. It contributes minor amounts of fruit acids, sugars, and vitamins but functions mainly as a hydrating base ingredient. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Ethylparaben Preservative | Ethylparaben is a paraben-class antimicrobial preservative used to inhibit the growth of bacteria, yeast, and mold in cosmetic and skincare formulations. It is valued for its broad-spectrum efficacy and stability across a wide pH range. |
| Ascorbyl Glucoside Key active Antioxidant / vitamin C derivative | Ascorbyl Glucoside is a stable, water-soluble vitamin C derivative that is enzymatically converted to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and skin brightening. It is generally considered milder and more stable than pure L-ascorbic acid. |
| Hydrolyzed Rice Protein Conditioning agent / film-former | Hydrolyzed rice protein is a water-soluble blend of amino acids and peptides derived from rice, used in skincare and haircare to provide moisturizing, conditioning, and film-forming benefits that improve surface smoothness and hydration. It is primarily a cosmetic functional ingredient rather than a clinically active treatment. |
| Potassium Hydroxide pH adjuster / saponifying agent | Potassium hydroxide is a strong alkaline compound used in cosmetics to adjust pH and to saponify fatty acids in the production of liquid soaps and cleansers. At regulated low concentrations in finished products it is considered safe, functioning as a formulation aid rather than an active treatment. |
| Alcohol Solvent / penetration enhancer | Alcohol (typically ethanol or denatured alcohol) is used in skincare as a solvent, antimicrobial agent, and to improve product spreadability and rapid drying. It also enhances penetration of other ingredients and gives a lightweight feel to formulations. |
| Tetrasodium EDTA Chelating agent | Tetrasodium EDTA is a chelating agent used in skincare formulations to bind metal ions, improving product stability, preserving efficacy, and enhancing the performance of preservatives and surfactants. It is a formulation aid rather than a therapeutic active. |
| Retinyl Palmitate Key active Antioxidant / retinoid (vitamin A derivative) | Retinyl palmitate is an ester of retinol and palmitic acid used as a vitamin A source and antioxidant in skincare. It is converted in the skin to retinol and then retinoic acid, offering milder anti-aging and skin-conditioning effects than stronger retinoids. |
| Medicago Sativa Extract Antioxidant / Skin conditioning | Medicago Sativa (alfalfa) Extract is a plant-derived ingredient rich in vitamins, amino acids, and antioxidants used in skincare to condition and protect skin. It is primarily included for its soothing and antioxidant properties rather than as a clinically proven dermatological active. |
| Sorbitan Laurate Emulsifier / surfactant | Sorbitan Laurate is a non-ionic emulsifier and surfactant derived from sorbitol and lauric acid, used to stabilize oil-in-water emulsions and improve texture in skincare formulations. It functions primarily as a base/formulation ingredient rather than a treatment active. |
| Panax Ginseng Root Extract Key active Antioxidant / skin-conditioning | Panax Ginseng Root Extract is a botanical extract rich in ginsenosides and polysaccharides used in skincare for its antioxidant, anti-inflammatory, and circulation-supporting properties. It is often included to promote a brighter, more revitalized appearance and to help defend against oxidative stress. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Dipropylene Glycol Solvent/humectant | Dipropylene glycol is a clear, low-viscosity glycol used in cosmetics primarily as a solvent, humectant, and viscosity-reducing agent. It helps dissolve fragrances and other ingredients while contributing mild moisture-retention properties. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Morus Alba Leaf Extract Key active Skin-brightening antioxidant | Morus alba (white mulberry) leaf extract is a botanical ingredient rich in flavonoids and polyphenols, used in skincare for its antioxidant and tyrosinase-inhibiting properties that may help reduce hyperpigmentation. It is typically incorporated as a functional active in brightening and protective formulations. |
| Sophora Angustifolia Root Extract Key active Skin-conditioning / antioxidant botanical | Sophora Angustifolia (narrow-leaved sophora) root extract is a plant-derived ingredient containing flavonoids and matrine alkaloids, used in skincare for its antioxidant, anti-inflammatory, and reported skin-brightening (tyrosinase-inhibiting) properties. It is typically included as a soothing or pigmentation-targeting botanical active. |
| Hydroxyethylcellulose Thickener/viscosity modifier | Hydroxyethylcellulose is a non-ionic, water-soluble cellulose derivative used to thicken, stabilize, and adjust the texture of aqueous cosmetic formulations. It functions as a gelling and film-forming agent rather than providing a direct biological skin benefit. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Ascorbic Acid Key active Antioxidant / brightening active | Ascorbic acid (vitamin C) is a water-soluble antioxidant used in skincare to neutralize free radicals, inhibit melanin synthesis, and support collagen production. It is valued for brightening, evening skin tone, and protecting against photodamage when used alongside sunscreen. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Methyl Benzoate Fragrance/solvent | Methyl benzoate is an aromatic ester used in cosmetics primarily as a fragrance component and solvent. It imparts a sweet, floral scent and can act as a carrier for other ingredients. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Acetyl Dipeptide-1 Cetyl Ester Key active Soothing peptide / sensory modulator | Acetyl Dipeptide-1 Cetyl Ester is a synthetic lipidated dipeptide used in cosmetics for its purported soothing and anti-irritant effects, thought to modulate sensory neuron signaling and reduce discomfort sensations. It is often included in products targeting sensitive or reactive skin. |
| Palmitoyl Tripeptide-1 Key active Signal peptide / anti-aging active | Palmitoyl Tripeptide-1 is a synthetic palmitoylated peptide (sequence Gly-His-Lys) used in cosmetics to signal fibroblasts and support collagen and extracellular matrix synthesis. It is commonly combined with other peptides in anti-aging and firming formulations. |
| Palmitoyl Tetrapeptide-7 Key active Anti-aging signal peptide | Palmitoyl Tetrapeptide-7 is a palmitoylated synthetic peptide used in cosmetic formulations, primarily marketed to help reduce inflammatory signaling and support a more even, firmer skin appearance. It is commonly paired with other peptides such as Palmitoyl Tripeptide-1 in anti-aging products. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.