Below is every ingredient in Dragon Fruit Bounce Gel Sunscreen SPF 50+ PA++++, With New-Age UV Filters explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage.
Phenylbenzimidazole Sulfonic Acid (Ensulizole) is a water-soluble organic UV filter that primarily absorbs UVB radiation, helping to prevent sunburn. Its water solubility makes it suitable for lighter, less greasy sunscreen and daily moisturizer formulations.
Ectoin is a naturally derived amino acid derivative (extremolyte) that stabilizes proteins and cell membranes, helping skin retain moisture and resist environmental stressors such as UV radiation and pollution. It is used in skincare for hydration, barrier support, and soothing of irritated or sensitive skin.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Contact irritation (mild stinging or redness) | Uncommon | Transient and typically mild, especially on sensitive skin. |
| Allergic contact dermatitis | Rare | Reported in isolated cases; confirmed via patch testing. |
| Eye irritation | Uncommon | Can occur if product migrates into the eyes. |
| Photoallergic reaction | Very rare | Rarely documented compared with some other UV filters. |
| Contact irritation | Uncommon | Mild stinging or redness, especially on sensitive or compromised skin. |
| Photoallergic/photocontact reactions | Rare | Reaction triggered upon UV exposure; documented occasionally. |
| Mild skin irritation or redness | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Clogged pores / comedogenic-related breakouts | Uncommon | Often anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well. |
| Eye irritation on accidental contact | Rare | Transient stinging or discomfort if product enters the eyes. |
| Skin irritation | Uncommon | Mild redness or stinging, more likely at higher concentrations or on sensitive skin. |
| Dryness or barrier disruption | Rare | Possible with prolonged or high-concentration exposure. |
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or at high concentrations. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Terephthalylidene Dicamphor Sulfonic Acid Key active UV filter (sunscreen) | Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage. |
| Phenylbenzimidazole Sulfonic Acid Key active UVB sunscreen filter | Phenylbenzimidazole Sulfonic Acid (Ensulizole) is a water-soluble organic UV filter that primarily absorbs UVB radiation, helping to prevent sunburn. Its water solubility makes it suitable for lighter, less greasy sunscreen and daily moisturizer formulations. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Triethanolamine pH adjuster / emulsifier | Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Isododecane Emollient/solvent | Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Ectoin Key active Protective osmolyte / humectant | Ectoin is a naturally derived amino acid derivative (extremolyte) that stabilizes proteins and cell membranes, helping skin retain moisture and resist environmental stressors such as UV radiation and pollution. It is used in skincare for hydration, barrier support, and soothing of irritated or sensitive skin. |
| Sodium Hyaluronate Crosspolymer Humectant / hydrating agent | Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| 6II (and) Cholesterol (and) 1 Emollient / skin-barrier lipid | This appears to be a ceramide-based barrier-repair complex combining ceramides (e.g., ceramide NP/6II) with cholesterol and free fatty acids, mimicking the skin's natural intercellular lipid matrix. It functions to reinforce the stratum corneum and reduce transepidermal water loss. |
| 2-Hexanediol Humectant/preservative-booster | 1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Sodium Stearoyl Glutamate Emulsifier / surfactant | Sodium Stearoyl Glutamate is a mild, amino-acid-derived (glutamic acid and stearic acid) anionic surfactant used primarily as an emulsifier and co-emulsifier to stabilize oil-in-water formulations. It is well tolerated and often chosen for gentle, naturally derived cosmetic systems. |
| Dimethicone/Vinyl Dimethicone Crosspolymer (and) Silica Texturizing/silicone elastomer powder | Dimethicone/Vinyl Dimethicone Crosspolymer (and) Silica is a silicone elastomer powder used in cosmetic formulations to provide a smooth, velvety skin feel, blur the appearance of pores and fine lines, and absorb excess sebum. It functions as a sensory and texture-modifying agent rather than a biologically active treatment. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.