Drsheths · 🇮🇳 India

Argireline® Peptide & Copper Peptide B'tox Serum - 30ml

38 ingredients
What's in it

Below is every ingredient in Argireline® Peptide & Copper Peptide B'tox Serum - 30ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
1 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 0/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Argireline® Peptide & Copper Peptide B'tox Serum - 30ml fungal-acne safe?
Based on its listed ingredients, Argireline® Peptide & Copper Peptide B'tox Serum - 30ml contains 1 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Polysorbate 20. If you are fungal-acne prone, you may want to avoid these.
Does Argireline® Peptide & Copper Peptide B'tox Serum - 30ml contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Argireline® Peptide & Copper Peptide B'tox Serum - 30ml.
Will Argireline® Peptide & Copper Peptide B'tox Serum - 30ml clog pores?
The highest comedogenic rating among its listed ingredients is 0/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Argireline® Peptide & Copper Peptide B'tox Serum - 30ml safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Acetyl Hexapeptide-8
Anti-wrinkle peptide

Acetyl Hexapeptide-8 (also known as Argireline or acetyl hexapeptide-3) is a synthetic peptide that mimics the N-terminal end of SNAP-25, mildly inhibiting neurotransmitter release to reduce the appearance of expression lines. It is marketed as a topical alternative to injectable neuromodulators, though its effects are subtler.

Avena Sativa Kernel Extract
Soothing / anti-irritant

Avena Sativa (oat) Kernel Extract is derived from oat seeds and is used in skincare for its soothing, anti-inflammatory, and skin-barrier-supporting properties, largely attributed to avenanthramides, beta-glucans, and saponins. It is commonly incorporated to calm irritation, reduce itching, and improve hydration in sensitive or compromised skin.

Palmitoyl Tripeptide-1
Signal peptide / anti-aging active

Palmitoyl Tripeptide-1 is a synthetic palmitoylated peptide (sequence Gly-His-Lys) used in cosmetics to signal fibroblasts and support collagen and extracellular matrix synthesis. It is commonly combined with other peptides in anti-aging and firming formulations.

Palmitoyl Tetrapeptide-7
Anti-aging signal peptide

Palmitoyl Tetrapeptide-7 is a palmitoylated synthetic peptide used in cosmetic formulations, primarily marketed to help reduce inflammatory signaling and support a more even, firmer skin appearance. It is commonly paired with other peptides such as Palmitoyl Tripeptide-1 in anti-aging products.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Glycolic Acid
Chemical exfoliant (AHA)

Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Skin dryness or barrier disruption with excessive contactUncommonFrequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss.
Irritation from impurities or hard water mineralsRareReactions are attributed to contaminants, chlorine, or mineral content rather than water itself.
Mild skin irritationUncommonTransient stinging or redness, more likely on compromised or sensitive skin.
Allergic contact dermatitisRareSensitization is infrequent; propanediol is generally considered low-risk for allergy.
Enhanced penetration of co-formulated irritantsUncommonAs a penetration enhancer it may increase absorption and irritation potential of other actives.
Mild transient skin irritation or rednessUncommonGenerally mild and self-limiting; more likely at higher concentrations or in sensitive skin.
Contact dermatitis / allergic sensitizationRareIsolated reports; patch testing advised for sensitive individuals.
Itching or stinging on applicationRareUsually associated with the overall formulation rather than the peptide itself.
Contact urticariaVery rareHives or immediate skin reaction reported mainly in individuals with atopic dermatitis or oat protein sensitivity.
Mild stinging or transient irritationUncommonBrief sensation on application, more likely on broken or highly reactive skin.
Mild transient stinging or irritationUncommonMore likely at high concentrations or on compromised/broken skin.
Tacky or sticky skin feelCommonA cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations.
Contact dermatitis or allergic reactionRareTrue allergy to glycerin is uncommon; patch-test positivity is infrequent.
Skin dehydration in very low humidityRareIn very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Acetyl Hexapeptide-8 Key active
Anti-wrinkle peptide
Acetyl Hexapeptide-8 (also known as Argireline or acetyl hexapeptide-3) is a synthetic peptide that mimics the N-terminal end of SNAP-25, mildly inhibiting neurotransmitter release to reduce the appearance of expression lines. It is marketed as a topical alternative to injectable neuromodulators, though its effects are subtler.
Caprylyl Glycol
Humectant / skin-conditioning agent and preservative booster
Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active.
Avena Sativa Kernel Extract Key active
Soothing / anti-irritant
Avena Sativa (oat) Kernel Extract is derived from oat seeds and is used in skincare for its soothing, anti-inflammatory, and skin-barrier-supporting properties, largely attributed to avenanthramides, beta-glucans, and saponins. It is commonly incorporated to calm irritation, reduce itching, and improve hydration in sensitive or compromised skin.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Carbomer
Thickener / gelling agent
Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active.
Polysorbate 20
Emulsifier / solubilizer
Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active.
Palmitoyl Tripeptide-1 Key active
Signal peptide / anti-aging active
Palmitoyl Tripeptide-1 is a synthetic palmitoylated peptide (sequence Gly-His-Lys) used in cosmetics to signal fibroblasts and support collagen and extracellular matrix synthesis. It is commonly combined with other peptides in anti-aging and firming formulations.
Palmitoyl Tetrapeptide-7 Key active
Anti-aging signal peptide
Palmitoyl Tetrapeptide-7 is a palmitoylated synthetic peptide used in cosmetic formulations, primarily marketed to help reduce inflammatory signaling and support a more even, firmer skin appearance. It is commonly paired with other peptides such as Palmitoyl Tripeptide-1 in anti-aging products.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Betaine
Humectant / osmolyte
Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations.
Glycolic Acid Key active
Chemical exfoliant (AHA)
Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Ethoxydiglycol
Solvent / penetration enhancer
Ethoxydiglycol (diethylene glycol monoethyl ether) is a glycol ether used in cosmetic formulations primarily as a solvent and viscosity reducer that helps dissolve active ingredients and improve their skin penetration. It is considered a formulation aid rather than a therapeutic active.
Sodium Hyaluronate Crosspolymer
Humectant / hydrating agent
Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Sodium Acetylated Hyaluronate
Humectant / moisturizer
Sodium Acetylated Hyaluronate is an acetylated, sodium-salt derivative of hyaluronic acid used in skincare for its enhanced moisture retention and improved skin adherence compared to standard hyaluronic acid. The acetyl modification increases lipophilicity, allowing better surface binding and prolonged hydration.
Hydrolyzed Sodium Hyaluronate
Humectant / hydrating agent
Hydrolyzed sodium hyaluronate is an enzymatically or chemically fragmented, low-molecular-weight form of sodium hyaluronate used in skincare to attract and bind water. Its smaller size allows better penetration into the upper layers of the skin compared to high-molecular-weight hyaluronic acid, supporting surface hydration and a smoother appearance.
Pentylene Glycol
Humectant / solvent / preservative-booster
Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Sophora Flavescens Root Extract Key active
Soothing/anti-inflammatory botanical extract
Sophora Flavescens Root Extract is derived from the root of Sophora flavescens and is used in skincare for its antioxidant, anti-inflammatory, and antimicrobial properties, often to calm irritation and address sensitive or acne-prone skin. It contains alkaloids such as matrine and oxymatrine along with flavonoids.
Glycyrrhiza Inflata Root Extract Key active
Soothing/anti-inflammatory & brightening agent
Glycyrrhiza Inflata Root Extract is a licorice-derived botanical extract rich in licochalcone A, valued for its anti-inflammatory, antioxidant, and pigment-modulating properties. It is commonly used to calm sensitive or redness-prone skin and to support an even skin tone.
Scutellaria Baicalensis Root Extract Key active
Antioxidant / soothing botanical
Scutellaria Baicalensis Root Extract is a plant-derived ingredient rich in flavonoids such as baicalin, baicalein, and wogonin, valued in skincare for its antioxidant, anti-inflammatory, and skin-soothing properties. It is commonly used to help calm irritation and protect skin against environmental oxidative stress.
Copper Tripeptide-1 Key active
Signal peptide / skin-conditioning agent
Copper Tripeptide-1 (GHK-Cu) is a copper-bound peptide used in skincare for its reported ability to support collagen and elastin synthesis, wound healing, and antioxidant activity. It is considered a bioactive cosmetic ingredient targeting signs of skin aging.
Cyclodextrin
Stabilizer / delivery carrier
Cyclodextrin is a cyclic oligosaccharide that forms inclusion complexes with hydrophobic molecules, used in skincare to stabilize, solubilize, and improve delivery of active ingredients while reducing odor and irritation. It functions primarily as a formulation aid rather than a direct skin-active.
Centella Asiatica Extract Key active
Soothing/antioxidant active
Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Caffeine Key active
Antioxidant / vasoconstrictor
Caffeine is a topical active used in skincare for its antioxidant properties and ability to constrict blood vessels, which may temporarily reduce puffiness and the appearance of under-eye darkness. It is also studied for reducing localized fluid retention and protecting against UV-induced oxidative stress.
Sodium Polyacryloyldimethyl Taurate
Emulsifier / thickener
Sodium Polyacryloyldimethyl Taurate is a synthetic acrylate-based polymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create smooth, gel-like textures and stabilizes oil-in-water emulsions.
Sodium Polyacrylate
Thickener / absorbent
Sodium polyacrylate is a superabsorbent acrylic-acid polymer used in skincare as a thickening, stabilizing, and water-binding agent that can hold large amounts of liquid to create gel-like textures. It functions as a formulation and texture-enhancing ingredient rather than a biologically active treatment.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →