Below is every ingredient in Super Glow Shimmer Lotion explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin irritation or sensitivity | Very rare | Water itself is essentially non-irritating; rare reactions relate to contaminants or other formula components, not the water. |
| Transient skin dryness with frequent contact | Rare | Excessive wetting/evaporation can disrupt the skin barrier, but this is not specific to DM water. |
| Skin irritation | Uncommon | Mild irritation may occur, typically at higher concentrations or with prolonged exposure. |
| Allergic contact dermatitis | Rare | Sensitization is uncommon but has been reported in patch-test studies. |
| Enhanced penetration of other ingredients | Uncommon | By disrupting skin barrier integrity, it may increase absorption of co-formulated substances. |
| Mild transient irritation or stinging | Rare | Generally well tolerated; occasional mild reactions, often on compromised or sensitive skin. |
| Contact dermatitis or allergic reaction | Very rare | Allantoin is considered to have very low sensitizing potential; allergic responses are exceptionally uncommon. |
| Redness or itching | Rare | Typically mild and self-limiting, possibly related to other formulation components. |
| Mild skin irritation | Rare | Generally well tolerated; occasional transient irritation possible, often related to other formulation components or pH. |
| Contact dermatitis / allergic reaction | Very rare | Allergic sensitization to carbomer-type polymers is uncommon and infrequently documented. |
| Eye irritation | Rare | May cause mild stinging or irritation on direct contact with eyes. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| DM Water Solvent/base | DM Water (demineralized water) is purified water with mineral ions removed via ion-exchange or reverse osmosis, used as the primary solvent and base for dissolving ingredients and forming the aqueous phase in cosmetic formulations. It is functionally inert and provides hydration and a vehicle for other actives. |
| Disodium Ethylenediaminetetraacetate Chelating agent | Disodium EDTA is a chelating agent that binds metal ions in cosmetic formulations, enhancing product stability and improving the efficacy of preservatives and surfactants. It is widely used as a formulation aid rather than as a skin treatment active. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Sodium Carbomer Thickener / gel-forming agent | Sodium Carbomer is the sodium salt of carbomer, a synthetic high-molecular-weight polymer used to thicken, stabilize, and create gel textures in cosmetic formulations. It functions as a rheology modifier and emulsion stabilizer rather than a biologically active treatment ingredient. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Sorbitan Stearate (and) Sucrose Cocoate Emulsifier | Sorbitan Stearate (and) Sucrose Cocoate is a self-emulsifying blend of a sorbitan ester and a sucrose ester used to create stable oil-in-water emulsions. It functions as a mild, nonionic surfactant and texture enhancer in creams and lotions. |
| Stearic acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Glyceryl Stearate SE Emulsifier / emollient | Glyceryl Stearate SE is a self-emulsifying form of glyceryl stearate used to blend oil and water phases in creams and lotions, also providing a softening, conditioning effect on skin. It functions as a formulation base ingredient rather than a therapeutic active. |
| Cetyl Alochol Emollient/Emulsifier | Cetyl alcohol is a fatty alcohol used in skincare as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the texture and stability of creams and lotions. |
| Light Liquid Paraffin Emollient / occlusive | Light liquid paraffin is a highly refined, low-viscosity mineral oil used in skincare as an emollient and occlusive agent that softens skin and reduces transepidermal water loss. It is chemically inert and serves primarily as a base or vehicle ingredient rather than a therapeutic active. |
| Isopropyl Myristate Emollient / skin-conditioning agent | Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products. |
| Shea butter Emollient / occlusive moisturizer | Shea butter is a plant-derived fat extracted from the nuts of the African shea tree (Vitellaria paradoxa), rich in triglycerides and unsaponifiable compounds. It is widely used in skincare to soften skin, reduce transepidermal water loss, and provide an occlusive barrier. |
| Glyceryl Stearate/PEG-100 Stearate Emulsifier | Glyceryl Stearate/PEG-100 Stearate is a widely used emulsifier blend that combines oil and water phases in creams and lotions, while also providing emollient and skin-conditioning properties. It is a formulation base ingredient rather than a therapeutic active. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Butylated Hydroxytoluene Antioxidant/preservative | Butylated Hydroxytoluene (BHT) is a synthetic antioxidant used in cosmetic formulations to prevent oxidation and rancidity of oils and fats, helping maintain product stability and shelf life. It functions as a stabilizer rather than a therapeutic active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Polysorbate 80 Emulsifier / surfactant / solubilizer | Polysorbate 80 is a nonionic surfactant derived from sorbitol and oleic acid, used to emulsify oil and water phases and solubilize fragrances and oils in cosmetic and pharmaceutical formulations. It functions as a formulation aid rather than a therapeutic active. |
| 2-Phenoxythanol Preservative | Phenoxyethanol is a glycol ether widely used as a broad-spectrum preservative in cosmetics and skincare to prevent microbial growth and extend product shelf life. It is typically used at concentrations up to 1% and is often combined with other preservatives. |
| Dimethicone and Perfume Emollient & fragrance | Dimethicone is a silicone-based emollient and skin-conditioning agent that forms a smooth, occlusive protective film, while perfume (fragrance) is added to impart scent. Together they are formulation/cosmetic components rather than therapeutic actives. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.