Nykaa · 🇮🇳 India

Hyphen Ultra Light Water Sunscreen Spf 50 Pa

29 ingredients
What's in it

Below is every ingredient in Hyphen Ultra Light Water Sunscreen Spf 50 Pa explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
1 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Hyphen Ultra Light Water Sunscreen Spf 50 Pa fungal-acne safe?
Based on its listed ingredients, Hyphen Ultra Light Water Sunscreen Spf 50 Pa contains 1 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl Glucoside. If you are fungal-acne prone, you may want to avoid these.
Does Hyphen Ultra Light Water Sunscreen Spf 50 Pa contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Hyphen Ultra Light Water Sunscreen Spf 50 Pa.
Will Hyphen Ultra Light Water Sunscreen Spf 50 Pa clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Hyphen Ultra Light Water Sunscreen Spf 50 Pa safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Ethylhexyl Methoxycinnamate
UV filter (UVB sunscreen)

Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
UV filter (broad-spectrum)

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.

Diethylamino Hydroxybenzoyl Hexyl Benzoate
UVA filter (sunscreen)

Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.

Centella Asiatica Extract
Soothing/antioxidant active

Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations.

Chamomilla Recutita Flower Extract
Soothing/anti-inflammatory botanical extract

Chamomilla Recutita (German chamomile) flower extract is a plant-derived ingredient used in skincare for its soothing, anti-inflammatory, and antioxidant properties, attributed to compounds such as bisabolol, chamazulene, and flavonoids. It is commonly added to formulations intended to calm sensitive, irritated, or reddened skin.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Contact irritation or mild stingingUncommonTransient skin irritation, especially on sensitive or compromised skin.
Allergic contact dermatitisRareSensitization reported but relatively infrequent compared with other UV filters.
Photoallergic contact dermatitisRareReaction triggered by combined exposure to the ingredient and sunlight.
Potential endocrine/estrogenic activityVery rareSuggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain.
Mild skin irritation or stingingUncommonTransient irritation, more likely on broken or compromised skin.
Contact urticariaRareHives or wheal reaction reported in isolated cases.
Mild transient flushing or rednessUncommonMore likely at higher concentrations or in sensitive skin; usually subsides quickly.
Tingling, stinging, or burning sensationUncommonOften associated with higher percentages or compromised barrier.
Contact irritation or itchingRareGenerally dose-dependent and resolves with discontinuation.
Mild skin irritationRareGenerally well tolerated; occasional transient redness or irritation in sensitive individuals.
Contact dermatitis / allergic reactionVery rareIsolated reports; considered a low-sensitizing ingredient.
Comedogenicity (pore clogging)RareLow comedogenic potential, but possible in acne-prone skin at high concentrations.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Ethylhexyl Methoxycinnamate Key active
UV filter (UVB sunscreen)
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Aloe Barbadensis Extract
Soothing/moisturizing agent
Aloe Barbadensis Extract is a plant-derived ingredient rich in polysaccharides, vitamins, and amino acids used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly incorporated into moisturizers, after-sun products, and soothing formulations.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Dicaprylyl Carbonate
Emollient / texture enhancer
Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active
UV filter (broad-spectrum)
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Centella Asiatica Extract Key active
Soothing/antioxidant active
Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations.
Steareth-21
Emulsifier/surfactant
Steareth-21 is a polyethylene glycol ether of stearyl alcohol used as a nonionic emulsifier and surfactant to stabilize oil-in-water emulsions and improve texture in skincare formulations. It is a base/formulation ingredient rather than a treatment active.
Dibutyl Adipate
Emollient / solvent
Dibutyl Adipate is a synthetic ester of adipic acid and butanol used in cosmetics as an emollient, solvent, and skin-conditioning agent. It imparts a light, non-greasy feel and helps spread and dissolve UV filters and other oil-soluble ingredients.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Chamomilla Recutita Flower Extract Key active
Soothing/anti-inflammatory botanical extract
Chamomilla Recutita (German chamomile) flower extract is a plant-derived ingredient used in skincare for its soothing, anti-inflammatory, and antioxidant properties, attributed to compounds such as bisabolol, chamazulene, and flavonoids. It is commonly added to formulations intended to calm sensitive, irritated, or reddened skin.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Hydrolyzed Sodium Hyaluronate
Humectant / hydrating agent
Hydrolyzed sodium hyaluronate is an enzymatically or chemically fragmented, low-molecular-weight form of sodium hyaluronate used in skincare to attract and bind water. Its smaller size allows better penetration into the upper layers of the skin compared to high-molecular-weight hyaluronic acid, supporting surface hydration and a smoother appearance.
Sodium Acetylated Hyaluronate
Humectant / moisturizer
Sodium Acetylated Hyaluronate is an acetylated, sodium-salt derivative of hyaluronic acid used in skincare for its enhanced moisture retention and improved skin adherence compared to standard hyaluronic acid. The acetyl modification increases lipophilicity, allowing better surface binding and prolonged hydration.
Sodium Hyaluronate Crosspolymer
Humectant / hydrating agent
Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface.
Tocotrienols Key active
Antioxidant
Tocotrienols are a subgroup of vitamin E compounds used in skincare for their antioxidant activity, helping protect skin lipids from oxidative damage caused by UV exposure and environmental stressors. They are often combined with tocopherols and other antioxidants to enhance stability and skin protection.
Ethylhexyl Triazone Key active
UVB sunscreen filter
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Glyceryl Glucoside Key active
Humectant / moisturizer
Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function.
Pentylene Glycol
Humectant / solvent / preservative-booster
Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients.
Propylene Glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Sodium Stearoyl Glutamate
Emulsifier / surfactant
Sodium Stearoyl Glutamate is a mild, amino-acid-derived (glutamic acid and stearic acid) anionic surfactant used primarily as an emulsifier and co-emulsifier to stabilize oil-in-water formulations. It is well tolerated and often chosen for gentle, naturally derived cosmetic systems.
Sodium Polyacrylate
Thickener / absorbent
Sodium polyacrylate is a superabsorbent acrylic-acid polymer used in skincare as a thickening, stabilizing, and water-binding agent that can hold large amounts of liquid to create gel-like textures. It functions as a formulation and texture-enhancing ingredient rather than a biologically active treatment.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →