Below is every ingredient in Ozone D Tan Face Wash 100 Ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Alpha arbutin is a naturally derived hydroquinone derivative that inhibits tyrosinase, reducing melanin production. It is used to address hyperpigmentation, dark spots, and uneven skin tone.
Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin dryness or tightness | Common | Due to its oil-absorbing properties, especially with overuse or on already dry skin. |
| Mild skin irritation or redness | Uncommon | Typically transient and related to overuse or sensitive skin. |
| Allergic contact dermatitis | Rare | Hypersensitivity reactions to kaolin or accompanying ingredients are infrequently reported. |
| Respiratory irritation from powder inhalation | Rare | Relevant mainly to loose powder formulations during application, not topical use. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild skin irritation | Rare | Generally well tolerated; occasional transient redness or stinging in sensitive individuals. |
| Comedogenicity / clogged pores | Uncommon | Low comedogenic potential, but may contribute to congestion in acne-prone skin at higher concentrations. |
| Skin irritation | Rare | Mild irritation or redness possible, generally in sensitive or compromised skin. |
| Cross-reactivity with other fatty alcohols | Rare | Individuals sensitized to cetyl or stearyl alcohol may react to the blend. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Kaolin Absorbent/clay cleanser | Kaolin is a naturally occurring soft white clay (hydrated aluminum silicate) used in skincare to absorb excess sebum, oil, and impurities. It is commonly found in face masks, cleansers, and powders as a mattifying and gentle exfoliating agent. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Aloe Barbadensis Leaf Juice Soothing/humectant | Aloe Barbadensis Leaf Juice is a plant-derived ingredient used in skincare for its hydrating, soothing, and emollient properties, often included to calm irritation and improve skin moisture. It functions primarily as a base/conditioning agent rather than a targeted treatment active. |
| Magnesium Aluminum Silicate Thickener/viscosity controller | Magnesium Aluminum Silicate is a naturally derived clay mineral used in cosmetics as a thickening, suspending, and stabilizing agent. It helps create smooth, uniform textures and prevents separation in creams, lotions, and masks. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Butyrospermum Parkii Butter Emollient/occlusive | Butyrospermum Parkii Butter (shea butter) is a plant-derived fat used in skincare as an emollient and occlusive agent to soften skin and reduce transepidermal water loss. It is rich in fatty acids and unsaponifiables that condition and help maintain the skin barrier. |
| Cucumis Sativus Fruit Extract Soothing/hydrating botanical extract | Cucumis Sativus (cucumber) fruit extract is used in skincare for its hydrating, soothing, and mild antioxidant properties. It is commonly added to formulations to provide a cooling, calming sensation and to support skin moisture. |
| Saccharide Isomerate Humectant / moisturizer | Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration and improve moisture retention. It is structurally similar to carbohydrates naturally found in the skin's upper layers. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Alpha-Arbutin Key active Skin-brightening agent | Alpha arbutin is a naturally derived hydroquinone derivative that inhibits tyrosinase, reducing melanin production. It is used to address hyperpigmentation, dark spots, and uneven skin tone. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Lactic Acid Key active Chemical exfoliant (AHA) | Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.