Below is every ingredient in Ponds Age Miracle Wrinkle Corrector Night Cream explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Retinyl Propionate is an ester of vitamin A (retinol) that is converted in the skin to retinoic acid, supporting cell turnover and collagen production. It is considered a milder, more stable retinoid used to improve signs of photoaging.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Hexylresorcinol is a resorcinol derivative used in topical formulations to reduce hyperpigmentation by inhibiting tyrosinase and providing antioxidant activity. It is considered a gentler alternative to hydroquinone for evening skin tone.
Sodium Ascorbyl Phosphate is a stable, water-soluble derivative of vitamin C (ascorbic acid) that is converted to active ascorbic acid in the skin. It provides antioxidant protection, supports collagen synthesis, and is also studied for its brightening and anti-acne (antibacterial) effects.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild skin irritation | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Contact allergy/sensitization | Very rare | Silicones are low-allergenicity; documented allergic reactions are exceptional. |
| Eye irritation | Rare | Possible transient stinging if product enters the eyes. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild contact irritation | Rare | Occasional redness or stinging, usually in sensitive or compromised skin. |
| Allergic contact dermatitis | Very rare | Isolated case reports; considered a low-sensitizing ingredient. |
| Comedogenicity / clogged pores | Rare | Generally low comedogenic potential, but acne-prone individuals may occasionally react. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Dimethicone Crosspolymer Silicone-based texture enhancer/film former | Dimethicone Crosspolymer is a crosslinked silicone polymer used in skincare and cosmetics to provide a smooth, silky feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation ingredient rather than a therapeutic active. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Potassium Chloride Viscosity/texture modifier & osmotic agent | Potassium chloride is a mineral salt used in cosmetic formulations primarily as a viscosity-controlling agent and to balance the osmotic and electrolyte properties of aqueous products. It is generally considered safe and non-active at the concentrations used in skincare. |
| Caprylyl Methicone Emollient / spreading agent | Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics. |
| PEG-10 Dimethicone Silicone-based emulsifier/conditioning agent | PEG-10 Dimethicone is a water-dispersible, PEG-modified silicone used in cosmetics as an emulsifier, surfactant, and skin-conditioning agent that imparts a smooth, silky feel and helps stabilize emulsions. It is considered a formulation/base ingredient rather than a therapeutic active. |
| Sucrose Distearate Emulsifier / surfactant | Sucrose Distearate is a sugar-derived nonionic emulsifier and emollient used to stabilize oil-in-water emulsions and improve skin feel in creams and lotions. It is considered a mild, biodegradable formulation ingredient rather than a treatment active. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Acrylates Crosspolymer Film former / rheology modifier | Acrylates Crosspolymer is a synthetic polymer used in skincare and cosmetics primarily as a thickening agent, emulsion stabilizer, and film former. It helps control product texture, viscosity, and spreadability rather than providing a direct therapeutic skin benefit. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Stearyl Dimethicone Emollient / silicone conditioning agent | Stearyl Dimethicone is a silicone wax (an alkyl-modified dimethicone) used in skincare and cosmetics as an emollient, thickener, and texture enhancer. It imparts a smooth, non-greasy feel, helps stabilize emulsions, and forms a light occlusive film that reduces transepidermal water loss. |
| Retinyl Propionate Key active Retinoid (anti-aging active) | Retinyl Propionate is an ester of vitamin A (retinol) that is converted in the skin to retinoic acid, supporting cell turnover and collagen production. It is considered a milder, more stable retinoid used to improve signs of photoaging. |
| Fragrance Fragrance/masking agent | Fragrance refers to a blend of natural or synthetic aromatic compounds added to skincare products to impart a pleasant scent or mask the odor of other ingredients. It serves a sensory and formulation purpose rather than a therapeutic one. |
| Disteardimonium Hectorite Rheology modifier / suspending agent | Disteardimonium Hectorite is a modified clay (quaternized hectorite) used in cosmetic formulations as a thickener and gellant, primarily in anhydrous and oil-based systems such as sunscreens, foundations, and lipsticks. It helps suspend pigments and prevent ingredient separation. |
| Magnesium Sulfate Emulsion stabilizer / viscosity-adjusting agent | Magnesium sulfate is an inorganic salt used in cosmetic formulations primarily as an emulsion stabilizer, viscosity controller, and bulking agent, particularly in water-in-oil systems. It is generally considered safe and well tolerated in topical skincare products. |
| BHT Antioxidant/preservative | BHT (butylated hydroxytoluene) is a synthetic phenolic antioxidant used in small amounts to prevent oxidation and rancidity of oils, fragrances, and other unstable components, helping maintain product stability and shelf life. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Octadecene Emollient/solvent | Octadecene (commonly 1-octadecene) is a long-chain alkene used in cosmetic formulations as an emollient, viscosity modifier, and solvent base, often in oily or anhydrous products. It functions to improve spreadability and texture rather than to treat skin conditions. |
| Cholesterol Skin barrier lipid / emollient | Cholesterol is a naturally occurring lipid found in the skin's stratum corneum that, alongside ceramides and fatty acids, helps maintain the skin barrier and prevent transepidermal water loss. In skincare formulations it functions as an emollient and barrier-repair agent that improves hydration and skin resilience. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| PEG-4 Laurate Emulsifier/surfactant | PEG-4 Laurate is a polyethylene glycol ester of lauric acid used in cosmetics as a nonionic emulsifier, surfactant, and emollient that helps blend oil and water phases and improve product texture. It is a formulation/base ingredient rather than a therapeutic active. |
| Aluminum Hydroxide Opacifier/colorant & skin protectant | Aluminum hydroxide is an inorganic compound used in cosmetics primarily as an opacifying agent, mild absorbent, and coating for pigments (such as in sunscreens and color cosmetics). It can also act as a buffering and skin-protectant ingredient in some topical formulations. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Hexylresorcinol Key active Skin-brightening / antioxidant agent | Hexylresorcinol is a resorcinol derivative used in topical formulations to reduce hyperpigmentation by inhibiting tyrosinase and providing antioxidant activity. It is considered a gentler alternative to hydroquinone for evening skin tone. |
| Iodopropynyl Butylcarbamate Preservative | Iodopropynyl Butylcarbamate (IPBC) is a broad-spectrum antimicrobial preservative used in cosmetics and personal care products primarily to protect against fungal and bacterial contamination. It is typically used at very low concentrations within regulatory limits. |
| Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate Antioxidant/stabilizer | Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate is a hindered-phenol antioxidant (also known as the industrial stabilizer Irganox 1010) used in cosmetic formulations to prevent oxidation and rancidity of oils, fats, and other ingredients. It functions primarily as a formulation stabilizer rather than a skin-active treatment. |
| Ceramide NG Skin-barrier lipid / moisturizer | Ceramide NG (formerly ceramide 2) is a synthetic skin-identical lipid that helps restore and reinforce the stratum corneum barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Sodium Ascorbyl Phosphate Key active Vitamin C derivative / antioxidant | Sodium Ascorbyl Phosphate is a stable, water-soluble derivative of vitamin C (ascorbic acid) that is converted to active ascorbic acid in the skin. It provides antioxidant protection, supports collagen synthesis, and is also studied for its brightening and anti-acne (antibacterial) effects. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Bifida Ferment Lysate Key active Probiotic-derived skin conditioning agent | Bifida Ferment Lysate is a lysate of fermented Bifidobacterium cultures used in skincare for its skin-conditioning, soothing, and barrier-supporting properties. It is studied for improving skin hydration, resilience, and protection against environmental stressors such as UV-induced damage. |
| Hydroxystearic Acid Emollient / thickener | Hydroxystearic acid is a fatty acid derivative used in skincare as an emollient, viscosity modifier, and surfactant/dispersing agent to improve texture and stability. It functions primarily as a formulation ingredient rather than a therapeutic active. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Sodium Metabisulfite Antioxidant/preservative | Sodium metabisulfite is an inorganic salt used in cosmetic and topical formulations primarily as an antioxidant and preservative to prevent oxidation and discoloration of products. It releases sulfur dioxide, which helps stabilize sensitive ingredients. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Sodium Bisulfite Antioxidant/preservative | Sodium bisulfite is an inorganic sulfite salt used in cosmetic and topical formulations primarily as an antioxidant and reducing agent to prevent oxidation and discoloration of products. It also functions as a preservative and can act as a stabilizer in certain formulations. |
| Hydrolyzed Collagen Humectant / skin-conditioning agent | Hydrolyzed collagen is collagen broken down into smaller peptides and amino acids, used in topical formulations to attract and bind water and improve skin surface smoothness and hydration. It functions primarily as a moisturizer and film-former rather than rebuilding the skin's own collagen. |
| Sodium Carbonate pH adjuster / buffering agent | Sodium carbonate is an alkaline inorganic salt used in skincare primarily to raise and stabilize formulation pH. It functions as a pH adjuster and buffering agent rather than as a therapeutic active. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Sodium Acetylated Hyaluronate Humectant / moisturizer | Sodium Acetylated Hyaluronate is an acetylated, sodium-salt derivative of hyaluronic acid used in skincare for its enhanced moisture retention and improved skin adherence compared to standard hyaluronic acid. The acetyl modification increases lipophilicity, allowing better surface binding and prolonged hydration. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Sodium Sulfate Viscosity/formulation aid | Sodium sulfate is an inorganic salt used in cosmetic formulations primarily as a thickening, bulking, and viscosity-controlling agent. It is not a skin-active ingredient and has no significant therapeutic effect on skin conditions. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Sodium Hyaluronate Crosspolymer Humectant / hydrating agent | Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface. |
| Sorbitan Laurate Emulsifier / surfactant | Sorbitan Laurate is a non-ionic emulsifier and surfactant derived from sorbitol and lauric acid, used to stabilize oil-in-water emulsions and improve texture in skincare formulations. It functions primarily as a base/formulation ingredient rather than a treatment active. |
| Retinol Key active Vitamin A derivative / anti-aging active | Retinol is a vitamin A derivative that converts to retinoic acid in the skin, promoting cell turnover and stimulating collagen synthesis. It is widely used to address fine lines, photoaging, and acne. |
| Alcohol Solvent / penetration enhancer | Alcohol (typically ethanol or denatured alcohol) is used in skincare as a solvent, antimicrobial agent, and to improve product spreadability and rapid drying. It also enhances penetration of other ingredients and gives a lightweight feel to formulations. |
| Hydrolyzed Sodium Hyaluronate Humectant / hydrating agent | Hydrolyzed sodium hyaluronate is an enzymatically or chemically fragmented, low-molecular-weight form of sodium hyaluronate used in skincare to attract and bind water. Its smaller size allows better penetration into the upper layers of the skin compared to high-molecular-weight hyaluronic acid, supporting surface hydration and a smoother appearance. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Hydroxyethylcellulose Thickener/viscosity modifier | Hydroxyethylcellulose is a non-ionic, water-soluble cellulose derivative used to thicken, stabilize, and adjust the texture of aqueous cosmetic formulations. It functions as a gelling and film-forming agent rather than providing a direct biological skin benefit. |
| Palmitic Acid Emollient / surfactant | Palmitic acid is a saturated fatty acid commonly used in skincare as an emollient, emulsifier, and cleansing agent that helps soften skin and stabilize formulations. It is also a natural component of the skin's lipid barrier. |
| Acetyl Dipeptide-1 Cetyl Ester Key active Soothing peptide / sensory modulator | Acetyl Dipeptide-1 Cetyl Ester is a synthetic lipidated dipeptide used in cosmetics for its purported soothing and anti-irritant effects, thought to modulate sensory neuron signaling and reduce discomfort sensations. It is often included in products targeting sensitive or reactive skin. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Arachidic Acid Emollient / surfactant precursor | Arachidic acid (eicosanoic acid) is a saturated long-chain fatty acid used in cosmetics primarily as an emollient, thickener, and opacifying agent, and as a base for surfactants and emulsifiers. It helps stabilize formulations and condition the skin surface rather than acting as a therapeutic active. |
| Potassium Phosphate pH adjuster / buffering agent | Potassium phosphate is a salt used in cosmetic and skincare formulations primarily as a buffering agent and pH stabilizer, helping maintain product stability and skin compatibility. It is considered a base/formulation ingredient rather than an active treatment. |
| Acetic Acid Key active Exfoliant / pH adjuster / antimicrobial | Acetic acid is a simple carboxylic acid (the active component of vinegar) used in skincare as a mild exfoliant, pH adjuster, and antimicrobial agent. At low concentrations it can help maintain skin acidity, while higher concentrations are used in chemical peels and antiseptic applications. |
| Lactic Acid Key active Chemical exfoliant (AHA) | Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations. |
| BHA Key active Chemical exfoliant | BHA (beta hydroxy acid), most commonly salicylic acid, is an oil-soluble exfoliant that penetrates pores to dissolve excess sebum and dead skin cells. It is widely used to treat acne, blackheads, and to improve skin texture and oiliness. |
| Ascorbyl Palmitate Key active Antioxidant / Vitamin C derivative | Ascorbyl palmitate is a lipid-soluble, more stable ester of vitamin C (ascorbic acid) used as an antioxidant in skincare formulations. It can help protect formulas from oxidation and may offer some skin antioxidant benefits, though its conversion to active ascorbic acid in skin is limited. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.