Below is every ingredient in Vaseline Cloud Soft Light Moisturiser explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
No standout actives — this is a basic/support formula.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild skin irritation | Rare | Generally well tolerated; occasional transient redness or stinging in sensitive individuals. |
| Allergic contact dermatitis | Very rare | Isolated case reports; uncommon as a primary sensitizer. |
| Comedogenicity / clogged pores | Uncommon | Low comedogenic potential, but may contribute to congestion in acne-prone skin at higher concentrations. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Cross-reactivity with other fatty alcohols | Rare | Individuals sensitized to cetyl or stearyl alcohol may react to the blend. |
| Comedogenicity (pore-clogging) | Uncommon | Considered moderately comedogenic; may contribute to clogged pores or breakouts in acne-prone individuals. |
| Contact irritation | Rare | Generally well tolerated; mild irritation reported infrequently. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Myristyl Myristate Emollient / thickener | Myristyl myristate is a waxy ester of myristyl alcohol and myristic acid used in cosmetics as an emollient, thickening agent, and opacifier. It improves skin feel, spreadability, and texture in creams, lotions, and color cosmetics. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Isopropyl Palmitate Emollient / Thickener | Isopropyl Palmitate is an ester of isopropyl alcohol and palmitic acid used as an emollient, skin-conditioning agent, and texture enhancer that improves spreadability and reduces greasiness in creams, lotions, and cosmetics. It is a formulation/base ingredient rather than a therapeutic active. |
| Butyrospermum Parkii Butter Emollient/occlusive | Butyrospermum Parkii Butter (shea butter) is a plant-derived fat used in skincare as an emollient and occlusive agent to soften skin and reduce transepidermal water loss. It is rich in fatty acids and unsaponifiables that condition and help maintain the skin barrier. |
| Glycol Distearate Opacifier/pearlescent agent, emollient | Glycol Distearate is a diester of ethylene glycol and stearic acid used primarily to impart a pearlescent or opaque appearance to cleansers and shampoos, while also providing mild emollient and thickening properties. It functions as a formulation aid rather than an active treatment ingredient. |
| Palmitic Acid Emollient / surfactant | Palmitic acid is a saturated fatty acid commonly used in skincare as an emollient, emulsifier, and cleansing agent that helps soften skin and stabilize formulations. It is also a natural component of the skin's lipid barrier. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Ceramide NP Skin-barrier replenishing lipid / emollient | Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer Thickener / stabilizer | Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a synthetic acrylic-based polymer used as a rheology modifier, thickening agent, and emulsion stabilizer in skincare and cosmetic formulations. It helps create smooth, stable gels and creams without contributing active treatment benefits to the skin. |
| Isohexadecane Emollient / solvent | Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients. |
| Polysorbate 80 Emulsifier / surfactant / solubilizer | Polysorbate 80 is a nonionic surfactant derived from sorbitol and oleic acid, used to emulsify oil and water phases and solubilize fragrances and oils in cosmetic and pharmaceutical formulations. It functions as a formulation aid rather than a therapeutic active. |
| Sodium Hyaluronate Crosspolymer Humectant / hydrating agent | Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Sodium Acetylated Hyaluronate Humectant / moisturizer | Sodium Acetylated Hyaluronate is an acetylated, sodium-salt derivative of hyaluronic acid used in skincare for its enhanced moisture retention and improved skin adherence compared to standard hyaluronic acid. The acetyl modification increases lipophilicity, allowing better surface binding and prolonged hydration. |
| Hydrolyzed Sodium Hyaluronate Humectant / hydrating agent | Hydrolyzed sodium hyaluronate is an enzymatically or chemically fragmented, low-molecular-weight form of sodium hyaluronate used in skincare to attract and bind water. Its smaller size allows better penetration into the upper layers of the skin compared to high-molecular-weight hyaluronic acid, supporting surface hydration and a smoother appearance. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Methylparaben Preservative | Methylparaben is a paraben-class antimicrobial preservative widely used in cosmetics and skincare to prevent microbial growth and extend product shelf life. It is effective primarily against fungi and yeasts, often combined with other parabens for broader protection. |
| Propylparaben Preservative | Propylparaben is a paraben-class antimicrobial preservative used to inhibit the growth of bacteria, mold, and yeast in cosmetic and personal care formulations. It is typically used at low concentrations alongside other parabens for broad-spectrum preservation. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Potassium Hydroxide pH adjuster / saponifying agent | Potassium hydroxide is a strong alkaline compound used in cosmetics to adjust pH and to saponify fatty acids in the production of liquid soaps and cleansers. At regulated low concentrations in finished products it is considered safe, functioning as a formulation aid rather than an active treatment. |
| Butylated Hydroxytoluene Antioxidant/preservative | Butylated Hydroxytoluene (BHT) is a synthetic antioxidant used in cosmetic formulations to prevent oxidation and rancidity of oils and fats, helping maintain product stability and shelf life. It functions as a stabilizer rather than a therapeutic active. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
| Benzyl Alcohol Preservative / solvent | Benzyl alcohol is an aromatic alcohol used primarily as a preservative and solvent in cosmetic formulations, and it also provides mild fragrance and viscosity-reducing properties. It is approved for use as a preservative at concentrations up to about 1% in leave-on and rinse-off products. |
| Geraniol Fragrance/aroma compound | Geraniol is a naturally occurring terpene alcohol used in cosmetics primarily as a fragrance ingredient and for its pleasant rose-like scent. It also has mild antioxidant and antimicrobial properties but is included mainly for olfactory rather than therapeutic purposes. |
| Hexyl Cinnamal Fragrance ingredient | Hexyl Cinnamal is a synthetic aromatic compound used as a fragrance and masking agent in cosmetic and skincare formulations, valued for its mild floral, jasmine-like scent. It is one of the 26 fragrance allergens required to be labeled in the EU. |
| Limonene Fragrance/solvent | Limonene is a naturally occurring monoterpene derived from citrus peel oils, commonly used as a fragrance component and solvent in cosmetic formulations. On exposure to air it oxidizes, forming compounds with greater sensitizing potential. |
| Linalool Fragrance/masking agent | Linalool is a naturally occurring terpene alcohol found in lavender, coriander, and many other plants, used in skincare primarily as a fragrance component. It readily oxidizes upon exposure to air, forming sensitizing hydroperoxides. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.