Thedermaco · 🇮🇳 India

5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g

40 ingredients
What's in it

Below is every ingredient in 5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
5 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is 5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g fungal-acne safe?
Based on its listed ingredients, 5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g contains 5 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Coco Caprylate/Caprate, Glyceryl Mono Stearate, Glyceryl Stearate Citrate, Linoleic Acid, Polyacrylate-13 (and) Polyisobutene (and) Polysorbate 20. If you are fungal-acne prone, you may want to avoid these.
Does 5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of 5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g.
Will 5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is 5% Nia-Ceramide Deep Moisturizing Cream with 5% Niacinamide & 1% Ceramide - 100g safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Urea
Humectant / keratolytic

Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis.

Phytosphingosine
Skin-conditioning agent / barrier-supporting lipid

Phytosphingosine is a naturally occurring sphingolipid that helps maintain the skin barrier and also exhibits antimicrobial and anti-inflammatory properties. It is commonly incorporated into moisturizers and barrier-repair formulations to support ceramide synthesis and skin integrity.

Avena Sativa (Oat) Kernel Extract
Soothing/anti-inflammatory emollient

Avena Sativa (Oat) Kernel Extract is derived from oat kernels and contains beta-glucans, avenanthramides, and polysaccharides that soothe, hydrate, and reduce irritation in the skin. It is widely used in products aimed at calming sensitive, dry, or eczema-prone skin.

Allantoin
Soothing/skin-conditioning agent

Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.

Vitamin E Acetate
Antioxidant / skin-conditioning agent

Vitamin E acetate (tocopheryl acetate) is a stable, esterified form of vitamin E used in skincare for its antioxidant and moisturizing properties. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Skin irritation or sensitivityVery rarePurified water is essentially inert; reactions are attributable to other formula components, not the water itself.
Transient skin barrier disruption from excessive exposureRareProlonged or repeated wetting can contribute to mild barrier compromise, but this relates to usage patterns rather than the ingredient.
Mild skin irritation or stingingCommonMore likely at higher concentrations or on compromised/sensitive skin
Allergic contact dermatitisUncommonRecognized contact allergen; confirmed via patch testing
Irritant contact dermatitisUncommonNon-allergic irritation, often dose-dependent
Worsening of pre-existing eczema or barrier-impaired skinRarePenetration-enhancing effect may increase reactivity
Systemic toxicity from topical useVery rareReported mainly with extensive application on broken skin, especially in infants or burn patients
Mild transient flushing or rednessUncommonMore likely at higher concentrations or in sensitive skin; usually subsides quickly.
Tingling, stinging, or burning sensationUncommonOften associated with higher percentages or compromised barrier.
Contact irritation or itchingRareGenerally dose-dependent and resolves with discontinuation.
Mild transient stinging or irritationUncommonMore likely at high concentrations or on compromised/broken skin.
Tacky or sticky skin feelCommonA cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations.
Contact dermatitis or allergic reactionRareTrue allergy to glycerin is uncommon; patch-test positivity is infrequent.
Skin dehydration in very low humidityRareIn very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Purified Water
Solvent/vehicle
Purified water is a highly filtered, deionized water used as the primary solvent and base in most skincare formulations. It dissolves water-soluble ingredients and provides the medium in which other components are dispersed.
Propylene Glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Betaine
Humectant / osmolyte
Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations.
Urea Key active
Humectant / keratolytic
Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis.
Caprylic/Capric Triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Dicaprylyl Carbonate
Emollient / texture enhancer
Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly.
Cetyl Stearyl Alcohol
Emollient / emulsifier
Cetyl Stearyl Alcohol (cetearyl alcohol) is a blend of fatty alcohols used in skincare as an emollient, emulsion stabilizer, and thickening agent to improve texture and consistency. It is widely regarded as safe and well-tolerated in cosmetic formulations.
Coco Caprylate/Caprate
Emollient / skin-conditioning agent
Coco-Caprylate/Caprate is a lightweight ester emollient derived from coconut-sourced fatty alcohols and caprylic/capric acids, used to provide a smooth, dry, non-greasy skin feel and to act as a silicone alternative. It functions primarily as a spreading agent and texture enhancer in lotions, creams, and sunscreens.
Petroleum Jelly
Occlusive emollient/moisturizer
Petroleum jelly (petrolatum) is a semisolid mixture of hydrocarbons derived from petroleum that forms an occlusive barrier on the skin, reducing transepidermal water loss and protecting against irritants. It is widely used as a base ingredient and skin protectant in dermatology and cosmetic formulations.
Glyceryl Mono Stearate
Emulsifier / emollient
Glyceryl Monostearate (GMS) is a glycerol ester of stearic acid widely used as a non-ionic emulsifier, thickener, and emollient to stabilize oil-in-water formulations and improve skin feel. It is considered a base/formulation ingredient rather than a treatment active.
Glyceryl Stearate Citrate
Emulsifier / co-emulsifier
Glyceryl Stearate Citrate is a plant-derived ester of glycerin, stearic acid, and citric acid used to create stable oil-in-water emulsions. It functions as a non-ionic emulsifier and skin-conditioning agent in creams and lotions.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Ceramide NP
Skin-barrier replenishing lipid / emollient
Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations.
Ceramide AP
Skin barrier lipid / moisturizer
Ceramide AP (ceramide 6-II) is a naturally occurring sphingolipid that helps restore and maintain the skin's barrier function and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations, often combined with other ceramides, cholesterol, and fatty acids.
Phytosphingosine Key active
Skin-conditioning agent / barrier-supporting lipid
Phytosphingosine is a naturally occurring sphingolipid that helps maintain the skin barrier and also exhibits antimicrobial and anti-inflammatory properties. It is commonly incorporated into moisturizers and barrier-repair formulations to support ceramide synthesis and skin integrity.
Cholesterol
Skin barrier lipid / emollient
Cholesterol is a naturally occurring lipid found in the skin's stratum corneum that, alongside ceramides and fatty acids, helps maintain the skin barrier and prevent transepidermal water loss. In skincare formulations it functions as an emollient and barrier-repair agent that improves hydration and skin resilience.
Sodium Lauroyl Lactylate
Emulsifier/surfactant
Sodium Lauroyl Lactylate is a mild, lactic acid-derived anionic surfactant and emulsifier used to stabilize oil-in-water formulations and improve skin feel. It also has some reported conditioning and antimicrobial-boosting properties.
Octyldodecanol
Emollient/solvent
Octyldodecanol is a branched fatty alcohol used in cosmetic formulations as an emollient, solvent, and skin-conditioning agent that improves spreadability and texture. It helps soften skin and dissolve other ingredients without functioning as a treatment active.
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Pentylene Glycol
Humectant / solvent / preservative-booster
Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients.
2-Hexanediol
Humectant/preservative-booster
1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active.
Carbomer
Thickener / gelling agent
Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Saccharide Isomerate (and) Sodium Citrate
Humectant / moisturizer
Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration, while Sodium Citrate functions as a buffering and chelating agent that stabilizes formulation pH. Together they form a moisturizing and conditioning blend commonly used in leave-on skincare products.
Polyacrylate-13 (and) Polyisobutene (and) Polysorbate 20
Rheology modifier / emulsion stabilizer
A pre-neutralized liquid thickener blend used to stabilize emulsions and provide consistent viscosity in cosmetic formulations. It functions purely as a texturizing and stabilizing system rather than delivering a skin treatment benefit.
Butyrospermum Parkii (Shea) Butter
Emollient / occlusive moisturizer
Butyrospermum Parkii (Shea) Butter is a plant-derived fat extracted from the nuts of the African shea tree, rich in triglycerides and unsaponifiables. It is widely used in skincare to soften, smooth, and condition the skin while forming an occlusive barrier that reduces water loss.
Garcinia Indica Seed Butter
Emollient / occlusive
Garcinia Indica (kokum) Seed Butter is a plant-derived butter rich in stearic and oleic fatty acids, used in skincare to soften, condition, and provide a protective occlusive barrier. It is valued for being non-greasy and restorative for dry or compromised skin.
Avena Sativa (Oat) Kernel Extract Key active
Soothing/anti-inflammatory emollient
Avena Sativa (Oat) Kernel Extract is derived from oat kernels and contains beta-glucans, avenanthramides, and polysaccharides that soothe, hydrate, and reduce irritation in the skin. It is widely used in products aimed at calming sensitive, dry, or eczema-prone skin.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Rheology modifier / emulsion stabilizer
Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active.
Sodium PCA
Humectant
Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
D-Panthenol
Humectant / skin-conditioning agent
D-Panthenol (provitamin B5) is converted to pantothenic acid in the skin and acts as a humectant and emollient, helping retain moisture and support barrier repair. It is commonly included in skincare for its hydrating and soothing properties.
Triethanolamine
pH adjuster / emulsifier
Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active.
Vitamin E Acetate Key active
Antioxidant / skin-conditioning agent
Vitamin E acetate (tocopheryl acetate) is a stable, esterified form of vitamin E used in skincare for its antioxidant and moisturizing properties. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Linoleic Acid Key active
Skin-barrier lipid / emollient
Linoleic acid is an essential omega-6 polyunsaturated fatty acid and a key component of skin ceramides that helps maintain the epidermal barrier and reduce transepidermal water loss. It is also studied for normalizing sebum composition and reducing comedone formation in acne-prone skin.
Linolenic Acid Key active
Skin-conditioning / barrier-repair fatty acid
Linolenic acid is an omega-3 polyunsaturated essential fatty acid used in skincare to support the skin's lipid barrier, reduce transepidermal water loss, and provide emollient and soothing benefits. It is also studied for mild anti-inflammatory and comedolytic effects.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →