Below is every ingredient in Water Based Sunscreen SPF 50 PA++++ - 50ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Allergic contact dermatitis | Rare | Sensitization reported but relatively infrequent compared with other UV filters. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
| Contact allergic reaction (allergic contact dermatitis) | Rare | Avobenzone is a recognized but uncommon cause of sunscreen allergy. |
| Photoallergic or photocontact dermatitis | Rare | Reactions triggered or worsened by sun exposure have been reported. |
| Skin irritation, redness, or stinging | Uncommon | Mild transient irritation may occur, particularly on sensitive or broken skin. |
| Eye irritation | Uncommon | Can cause stinging if the product migrates into the eyes. |
| Mild transient stinging or irritation | Uncommon | Usually brief and related to application on compromised or sensitive skin. |
| Redness or dryness in low-humidity environments | Uncommon | Can draw moisture from skin if ambient humidity is very low and not sealed with an occlusive. |
| Hypersensitivity reactions with injectable forms | Very rare | Relevant mainly to dermal filler use, not topical cosmetic application. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Benzophenone-3 Key active UV filter (sunscreen agent) | Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Fragrance Fragrance/masking agent | Fragrance refers to a blend of natural or synthetic aromatic compounds added to skincare products to impart a pleasant scent or mask the odor of other ingredients. It serves a sensory and formulation purpose rather than a therapeutic one. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| Trehalose Humectant / moisturizer | Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration. |
| Fructose Humectant | Fructose is a simple monosaccharide sugar used in skincare primarily as a humectant that attracts and binds water to help maintain skin hydration. It is generally considered a supporting/base ingredient rather than a therapeutic active. |
| Maltose Humectant / skin-conditioning agent | Maltose is a disaccharide sugar used in skincare primarily as a humectant and skin-conditioning agent, helping to attract and retain moisture in the stratum corneum. It is generally considered a low-risk, well-tolerated formulation ingredient rather than a therapeutic active. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Urea Key active Humectant / keratolytic | Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis. |
| Aloe Barbadensis Leaf Extract Soothing/moisturizing agent | Aloe Barbadensis Leaf Extract is derived from the aloe vera plant and is used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly included as a supportive base ingredient rather than a primary treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.