Nykaa · 🇮🇳 India

Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa

31 ingredients
What's in it

Below is every ingredient in Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
1 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa fungal-acne safe?
Based on its listed ingredients, Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa contains 1 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Stearic Acid. If you are fungal-acne prone, you may want to avoid these.
Does Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa.
Will Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Dermistry Natural Mineral Sunscreen With Spf 50 Uva Uvb Pa safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Zinc Oxide
UV filter / skin protectant

Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.

Allantoin
Soothing/skin-conditioning agent

Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.

Lactic Acid
Chemical exfoliant (AHA)

Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
White cast / cosmetic residue on skinCommonNon-micronized particles can leave a visible white film, especially on darker skin tones.
Dryness or mild skin tightnessUncommonDue to its astringent nature, particularly in high concentrations.
Clogged pores / acne aggravationUncommonMore often attributed to occlusive base ingredients than to zinc oxide itself.
Contact irritation or stingingRareGenerally well tolerated; irritation often relates to other formulation components.
Allergic contact dermatitisVery rareTrue allergy to zinc oxide is uncommon; reactions usually involve other excipients or fragrances.
Mild transient stinging or irritationUncommonMore likely at high concentrations or on compromised/broken skin.
Tacky or sticky skin feelCommonA cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations.
Contact dermatitis or allergic reactionRareTrue allergy to glycerin is uncommon; patch-test positivity is infrequent.
Skin dehydration in very low humidityRareIn very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive.
Skin irritationRareGenerally well tolerated; mild irritation possible in sensitive individuals.
Comedogenicity / breakoutsUncommonLow comedogenic potential but may contribute to clogged pores in acne-prone skin.
Contact urticariaVery rareIsolated reports of hive-like reactions tied to benzoate moiety.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Zinc Oxide Key active
UV filter / skin protectant
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
C12-15 Alkyl Benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Caprylic/Capric Triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Panthenol
Humectant / skin-conditioning agent
Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations.
Stearic Acid
Emulsifier / thickener
Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Sodium Benzoate
Preservative
Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5.
Sodium PCA
Humectant
Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin.
Sodium Lactate
Humectant / NMF component
Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function.
Arginine
Amino acid / pH adjuster & conditioning agent
Arginine is a basic amino acid used in skincare primarily as a pH buffer/neutralizer and humectant-like conditioning agent that supports skin hydration and barrier function. It is generally well tolerated and often paired with acidic ingredients to balance formulation pH.
Aspartic Acid
Amino acid / humectant
Aspartic acid is a non-essential amino acid used in skincare primarily as a hydrating and conditioning agent, often as part of amino acid complexes or natural moisturizing factor (NMF) blends. It supports skin barrier function and helps maintain hydration.
Pca
Humectant / NMF component
PCA (pyrrolidone carboxylic acid), often as sodium PCA, is a naturally occurring component of skin's natural moisturizing factor (NMF) that attracts and binds water to the stratum corneum. It is used in skincare to improve hydration and skin softness.
Glycine
Amino acid / humectant
Glycine is a small amino acid used in skincare as a humectant and conditioning agent, supporting skin hydration and acting as a building block for collagen and natural moisturizing factor. It is generally considered well-tolerated and is often included as part of moisturizing or barrier-support formulations.
Alanine
Amino acid / humectant
Alanine is a small non-essential amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a buffering agent and to improve the feel of formulations.
Serine
Humectant / amino acid
Serine is a naturally occurring amino acid and component of the skin's natural moisturizing factor (NMF), used in skincare to support hydration and help maintain the skin barrier. It is typically incorporated as a conditioning and water-binding agent rather than a clinical treatment active.
Valine
Amino acid / skin conditioning agent
Valine is a branched-chain essential amino acid used in skincare primarily as a humectant and skin-conditioning component, often as part of amino acid blends that support the skin's natural moisturizing factor (NMF). It helps maintain hydration and contributes to the protein-building constituents found naturally in the skin.
Proline
Amino acid / skin-conditioning agent
Proline is a non-essential amino acid and a key component of collagen, used in skincare as a humectant and skin-conditioning agent to support hydration and the skin barrier. It is generally well tolerated and often included in formulations for its moisturizing and structural-protein-supporting properties.
Threonine
Amino acid / skin conditioning agent
Threonine is an essential amino acid used in skincare primarily as a humectant and skin-conditioning agent, helping support hydration and the skin's natural moisturizing factor. It is also a building block for proteins such as collagen and elastin.
Isoleucine
Conditioning amino acid / humectant
Isoleucine is a branched-chain amino acid used in skincare as a skin-conditioning agent and humectant that helps maintain hydration and supports the skin's natural moisturizing factor. It is generally included in formulations to improve skin feel and barrier support rather than as a primary therapeutic active.
Histidine
Amino acid / skin-conditioning agent
Histidine is an essential amino acid used in skincare as a humectant and skin-conditioning agent, helping to support the skin's natural moisturizing factor and antioxidant defenses. It may also help buffer formulations and bind metal ions.
Phenylalanine
Amino acid / conditioning agent
Phenylalanine is an essential aromatic amino acid used in skincare as a skin-conditioning and humectant agent, and is also studied for its role in melanin synthesis pathways. In topical formulations it generally serves a supportive, hydrating function.
Potassium Cetyl Phosphate
Emulsifier
Potassium Cetyl Phosphate is an anionic emulsifier and surfactant used in oil-in-water formulations to stabilize emulsions and improve texture. It is considered a formulation/base ingredient rather than a treatment active.
Inulin Lauryl Carbamate
Emulsifier / surfactant
Inulin Lauryl Carbamate is a plant-derived, sugar-based emulsifier produced by reacting inulin with lauryl groups. It is used to stabilize oil-in-water emulsions and improve texture in creams and lotions.
Potassium Sorbate
Preservative
Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Sodium Hydroxide
pH adjuster
Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form.
Lactic Acid Key active
Chemical exfoliant (AHA)
Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.
Tetrasodium EDTA
Chelating agent
Tetrasodium EDTA is a chelating agent used in skincare formulations to bind metal ions, improving product stability, preserving efficacy, and enhancing the performance of preservatives and surfactants. It is a formulation aid rather than a therapeutic active.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →