Nykaa · 🇮🇳 India

Thank You Farmer Sun Project Water Sun Cream Spf50 Pa

26 ingredients
What's in it

Below is every ingredient in Thank You Farmer Sun Project Water Sun Cream Spf50 Pa explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
4 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens
Contains drying alcohol
Alcohol

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Thank You Farmer Sun Project Water Sun Cream Spf50 Pa fungal-acne safe?
Based on its listed ingredients, Thank You Farmer Sun Project Water Sun Cream Spf50 Pa contains 4 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Echium Plantagineum Seed Oil, Glyceryl Stearate, Helianthus Annuus Seed Oil Unsaponifiables, Plukenetia Volubilis Seed Oil. If you are fungal-acne prone, you may want to avoid these.
Does Thank You Farmer Sun Project Water Sun Cream Spf50 Pa contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Thank You Farmer Sun Project Water Sun Cream Spf50 Pa.
Will Thank You Farmer Sun Project Water Sun Cream Spf50 Pa clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Thank You Farmer Sun Project Water Sun Cream Spf50 Pa safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.
Does Thank You Farmer Sun Project Water Sun Cream Spf50 Pa contain drying alcohol?
Yes — it lists Alcohol, volatile alcohol(s) that can dehydrate the skin barrier with frequent use.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Ethylhexyl Methoxycinnamate
UV filter (UVB sunscreen)

Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.

Homosalate
UV filter (sunscreen)

Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.

Ethylhexyl Salicylate
UV filter (UVB sunscreen)

Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.

Diethylamino Hydroxybenzoyl Hexyl Benzoate
UVA filter (sunscreen)

Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.

Octocrylene
UV filter

Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Skin dryness or barrier disruption with excessive contactUncommonFrequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss.
Irritation from impurities or hard water mineralsRareReactions are attributed to contaminants, chlorine, or mineral content rather than water itself.
Contact irritation or mild stingingUncommonTransient skin irritation, especially on sensitive or compromised skin.
Allergic contact dermatitisRareSensitization reported but relatively infrequent compared with other UV filters.
Photoallergic contact dermatitisRareReaction triggered by combined exposure to the ingredient and sunlight.
Potential endocrine/estrogenic activityVery rareSuggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain.
Contact irritation or stingingUncommonMild transient irritation, especially around the eyes or on sensitive skin.
Photoallergic/photocontact reactionRareReaction triggered by sun exposure after application.
Potential endocrine activityVery rareWeak estrogenic effects observed in laboratory/animal studies; human clinical relevance at typical use levels remains under regulatory review.
Mild skin irritation or stingingUncommonGenerally well tolerated; transient irritation can occur, particularly on sensitive or compromised skin.
Photoallergic or photocontact reactionsRareReported occasionally with organic UV filters; less common than with some other sunscreen agents.
Eye irritation on accidental contactUncommonCan cause stinging if the product migrates into the eyes.
Skin irritation or mild contact dermatitisRareOccasional reports of localized redness or irritation, generally mild.
Allergic contact dermatitis / sensitizationVery rareIsolated case reports; considered a low-sensitizing UV filter.
Photoallergic reactionVery rareUncommon given its photostability, but possible in sensitive individuals.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Ethylhexyl Methoxycinnamate Key active
UV filter (UVB sunscreen)
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Homosalate Key active
UV filter (sunscreen)
Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.
Ethylhexyl Salicylate Key active
UV filter (UVB sunscreen)
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Octocrylene Key active
UV filter
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
C12-15 Alkyl Benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Cyclomethicone
Emollient/silicone solvent
Cyclomethicone is a volatile cyclic silicone used in skincare and cosmetics to impart a smooth, silky feel and aid spreadability before evaporating without residue. It functions as a carrier and emollient rather than an active treatment ingredient.
Alcohol
Solvent / penetration enhancer
Alcohol (typically ethanol or denatured alcohol) is used in skincare as a solvent, antimicrobial agent, and to improve product spreadability and rapid drying. It also enhances penetration of other ingredients and gives a lightweight feel to formulations.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Glyceryl Stearate
Emulsifier/emollient
Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active.
1,2-Hexanediol
Humectant / preservative booster
1,2-Hexanediol is a synthetic diol used in skincare as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, often allowing reduced or preservative-free systems. It helps maintain product stability while contributing mild moisturizing properties.
Viscum Album Leaf Extract Key active
Antioxidant / skin-conditioning extract
Viscum Album (mistletoe) Leaf Extract is a botanical ingredient containing flavonoids, polysaccharides and lectins, used in cosmetics for its antioxidant and skin-conditioning properties. It is most often included as a supportive botanical rather than a primary clinically validated active.
Portulaca Oleracea Extract Key active
Antioxidant/soothing botanical extract
Portulaca oleracea (purslane) extract is a plant-derived ingredient rich in omega-3 fatty acids, vitamins, and flavonoids used in topical formulations for its antioxidant, anti-inflammatory, and skin-soothing properties. It is commonly included to calm irritation and support skin barrier comfort.
Centella Asiatica Extract Key active
Soothing/antioxidant active
Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations.
Bambusa Vulgaris Water
Humectant/Soothing agent
Bambusa Vulgaris Water is a botanical water derived from the bamboo plant, used in skincare primarily as a hydrating, soothing, and conditioning ingredient. It serves as an aqueous base or carrier and may contribute trace minerals and silica.
Echium Plantagineum Seed Oil
Emollient / skin-conditioning oil
Echium Plantagineum (viper's bugloss) seed oil is a plant-derived oil notably rich in stearidonic acid (an omega-3 fatty acid) along with linoleic and alpha-linolenic acids. It is used in skincare as an emollient and conditioning agent intended to support the skin barrier and reduce visible redness.
Glycine Soja Lipids
Emollient / skin-conditioning
Glycine Soja Lipids are soybean-derived lipids rich in fatty acids and phospholipids used to soften skin and reinforce the skin barrier. They function primarily as an emollient and moisturizing agent in formulations.
Aloe Barbadensis Leaf Extract
Soothing/moisturizing agent
Aloe Barbadensis Leaf Extract is derived from the aloe vera plant and is used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly included as a supportive base ingredient rather than a primary treatment active.
Althaea Rosea Flower Extract
Soothing/emollient botanical extract
Althaea Rosea (hollyhock) Flower Extract is a plant-derived ingredient used in cosmetics for its mucilage content, which provides soothing, moisturizing, and skin-conditioning properties. It is commonly included to help calm and hydrate the skin.
Cardiospermum Halicacabum Flower/Leaf/Vine Extract Key active
Soothing / anti-inflammatory botanical extract
Cardiospermum Halicacabum Flower/Leaf/Vine Extract is a plant-derived ingredient valued for its anti-inflammatory and anti-itch properties, often included in formulations for sensitive, irritated, or eczema-prone skin. It is thought to have mild corticosteroid-like soothing activity without the steroid molecule itself.
Helianthus Annuus Seed Oil Unsaponifiables
Emollient / skin-conditioning agent
Helianthus Annuus (Sunflower) Seed Oil Unsaponifiables is the concentrated non-saponifiable fraction of sunflower seed oil, rich in phytosterols, tocopherols, and squalene. It is used in skincare for its emollient, barrier-supporting, and antioxidant properties.
Plukenetia Volubilis Seed Oil
Emollient / skin-conditioning oil
Plukenetia Volubilis (sacha inchi) seed oil is a plant-derived oil rich in omega-3, omega-6, and omega-9 fatty acids, used to soften and condition skin and support the skin barrier. It functions primarily as an emollient and occlusive in skincare formulations.
Methyl Methacrylate Crosspolymer
Texture enhancer / mattifying agent
Methyl Methacrylate Crosspolymer is a synthetic polymer used in cosmetics as a film-former and oil-absorbing powder that imparts a smooth, soft-focus, matte feel to formulations. It functions primarily as a sensory and texturizing base ingredient rather than a skin-treatment active.
Behenyl Alcohol
Emollient / Thickener
Behenyl alcohol is a fatty alcohol derived from behenic acid that functions as an emollient, thickening agent, and emulsion stabilizer in cosmetic and skincare formulations. It helps soften the skin and improve product texture and stability.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →