Below is every ingredient in Verso Skincare Night Cream explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Retinyl retinoate is a hybrid retinoid ester combining retinoic acid and retinol, designed to deliver retinoid activity with greater stability and lower irritation than retinoic acid. It is used in topical formulations to reduce wrinkles and improve photoaged skin.
Tetrahydrodiferuloylmethane (tetrahydrocurcumin) is a hydrogenated derivative of curcumin used in skincare as a colorless, more stable antioxidant. It helps neutralize free radicals and may inhibit melanin formation, contributing to skin-brightening and anti-aging effects.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Allergic contact dermatitis | Rare | Sensitization reported but relatively infrequent compared with other UV filters. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or at high concentrations. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Diethylhexyl Carbonate Emollient / solvent | Diethylhexyl Carbonate is a lightweight synthetic ester (dialkyl carbonate) used as an emollient and solvent in skincare and cosmetics. It imparts a smooth, dry, non-greasy skin feel and helps dissolve and spread other ingredients such as UV filters and active oils. |
| Heptyl Undecylenate Emollient / skin-conditioning agent | Heptyl undecylenate is a lightweight ester derived from undecylenic acid and heptyl alcohol, used in cosmetic formulations as an emollient and dry-feel skin-conditioning agent. It imparts a smooth, non-greasy texture and can serve as a natural-derived alternative to silicones. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Butyrospermum Parkii Oil Emollient / skin-conditioning | Butyrospermum Parkii Oil is the oil fraction derived from shea (Butyrospermum parkii) seeds, valued for its emollient and occlusive properties. It is rich in fatty acids and unsaponifiables that help soften skin and reinforce the skin barrier. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Aluminum Starch Octenylsuccinate Absorbent / texture enhancer | Aluminum Starch Octenylsuccinate is a modified starch derivative used in cosmetic formulations to absorb oil and moisture, impart a smooth powdery feel, and reduce greasiness. It functions as an anticaking agent, viscosity controller, and skin-conditioning agent rather than a biological active. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Jojoba Esters Emollient / skin-conditioning agent | Jojoba Esters are wax esters derived from jojoba oil, used in skincare to soften skin, reduce moisture loss, and improve product texture and spreadability. They are valued for their stability and skin-compatible, non-greasy emollient properties. |
| Canola Oil Emollient / skin-conditioning agent | Canola oil is a plant-derived oil rich in oleic and linoleic acids used in cosmetics as an emollient and occlusive to soften skin and reduce moisture loss. It serves primarily as a base or carrier ingredient rather than a therapeutic active. |
| Retinyl Retinoate Key active Anti-aging retinoid | Retinyl retinoate is a hybrid retinoid ester combining retinoic acid and retinol, designed to deliver retinoid activity with greater stability and lower irritation than retinoic acid. It is used in topical formulations to reduce wrinkles and improve photoaged skin. |
| Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer Emulsifier/stabilizer (thickener) | Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a synthetic acrylate-based polymer used to thicken, stabilize, and emulsify cosmetic formulations, creating smooth gel and cream textures. It is widely employed as a rheology modifier and is not a therapeutic active. |
| Tetrahydrodiferuloylmethane Key active Antioxidant / brightening agent | Tetrahydrodiferuloylmethane (tetrahydrocurcumin) is a hydrogenated derivative of curcumin used in skincare as a colorless, more stable antioxidant. It helps neutralize free radicals and may inhibit melanin formation, contributing to skin-brightening and anti-aging effects. |
| Tetrahydropiperine Penetration enhancer | Tetrahydropiperine (also marketed as Cosmoperine) is a hydrogenated derivative of piperine from black pepper used in topical formulations to enhance the skin penetration and bioavailability of co-formulated active ingredients. It functions primarily as a delivery enhancer rather than a standalone therapeutic active. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Curcuma Longa Root Extract Key active Antioxidant / anti-inflammatory | Curcuma Longa (turmeric) Root Extract is a plant-derived ingredient rich in curcuminoids, used in skincare for its antioxidant and anti-inflammatory properties. It may help reduce signs of oxidative stress and soothe irritated skin. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Cetyl Palmitate Emollient / Thickener | Cetyl palmitate is a waxy ester of cetyl alcohol and palmitic acid used as an emollient, thickening agent, and emulsion stabilizer in creams, lotions, and cosmetics. It softens skin and helps provide a smooth texture and consistent product structure. |
| Sorbitan Palmitate Emulsifier | Sorbitan Palmitate is a non-ionic emulsifier derived from sorbitol and palmitic acid, used to stabilize oil-in-water and water-in-oil emulsions in creams and lotions. It also functions as a surfactant and co-emulsifier to improve texture and consistency. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Caprylyl Glycol Humectant / skin-conditioning agent and preservative booster | Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.