Below is every ingredient in 12% Barrier Boost Serum (Hyaluronic + Ceramides) explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Methylsilanol Mannuronate is an organosilicon compound combining silanol with mannuronic acid (derived from algae), used in skincare for its humectant and skin-conditioning properties. It is marketed to support hydration and skin firmness, though robust clinical evidence is limited.
Alpha arbutin is a naturally derived hydroquinone derivative that inhibits tyrosinase, reducing melanin production. It is used to address hyperpigmentation, dark spots, and uneven skin tone.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.
Ectoin is a naturally derived amino acid derivative (extremolyte) that stabilizes proteins and cell membranes, helping skin retain moisture and resist environmental stressors such as UV radiation and pollution. It is used in skincare for hydration, barrier support, and soothing of irritated or sensitive skin.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
| Allergic contact dermatitis | Very rare | Documented in isolated case reports; true sensitization is unusual. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Mild transient irritation or stinging | Rare | Occasional on sensitive or compromised skin |
| Contact allergy / sensitization | Very rare | Allergic responses are uncommon for sugar-derived humectants; isolated cases possible in sensitive individuals. |
| Mild transient skin irritation or stinging | Rare | Typically minor and self-limiting, more likely on compromised skin |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Xylitylglucoside Humectant / moisturizer | Xylitylglucoside is a sugar-derived humectant, typically used in combination with anhydroxylitol and xylitol, that helps attract and retain water in the skin and supports the skin barrier. It is valued for its skin-hydrating and moisturizing properties in cosmetic formulations. |
| Anhydroxylitol Humectant / moisturizing agent | Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Cetyl Ethylhexanoate Emollient / skin-conditioning ester | Cetyl Ethylhexanoate is a lightweight synthetic ester (cetyl alcohol combined with 2-ethylhexanoic acid) widely used as an emollient and spreading agent in skincare and cosmetics. It provides a smooth, non-greasy feel, improves texture, and helps soften and condition the skin. |
| Ethoxydiglycol Solvent / penetration enhancer | Ethoxydiglycol (diethylene glycol monoethyl ether) is a glycol ether used in cosmetic formulations primarily as a solvent and viscosity reducer that helps dissolve active ingredients and improve their skin penetration. It is considered a formulation aid rather than a therapeutic active. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Phenyl Trimethicone Silicone emollient/conditioning agent | Phenyl Trimethicone is a phenyl-substituted silicone used in skincare and cosmetics to impart a smooth, silky feel, add shine, and provide water-repellent film-forming and conditioning properties. It functions as a formulation/base ingredient rather than a treatment active. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Polysilicone-11 Film-former / texturizer | Polysilicone-11 is a silicone-based crosslinked polymer used in cosmetics to form a smooth, flexible film on the skin, providing mattifying, blurring, and texture-improving effects. It is commonly found in primers, foundations, and sunscreens as a formulation ingredient rather than a treatment active. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Helianthus Annuus Seed Oil Emollient / skin-conditioning oil | Helianthus Annuus (Sunflower) Seed Oil is a plant-derived emollient rich in linoleic acid and vitamin E, used to soften skin and support the skin barrier. It is widely used as a base oil in moisturizers and cosmetic formulations. |
| Methylsilanol Mannuronate Key active Hydrating/conditioning agent | Methylsilanol Mannuronate is an organosilicon compound combining silanol with mannuronic acid (derived from algae), used in skincare for its humectant and skin-conditioning properties. It is marketed to support hydration and skin firmness, though robust clinical evidence is limited. |
| Squalane Emollient / occlusive moisturizer | Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| PCA Humectant / NMF component | PCA (pyrrolidone carboxylic acid), often as sodium PCA, is a naturally occurring component of skin's natural moisturizing factor (NMF) that attracts and binds water to the stratum corneum. It is used in skincare to improve hydration and skin softness. |
| Serine Humectant / amino acid | Serine is a naturally occurring amino acid and component of the skin's natural moisturizing factor (NMF), used in skincare to support hydration and help maintain the skin barrier. It is typically incorporated as a conditioning and water-binding agent rather than a clinical treatment active. |
| Alanine Amino acid / humectant | Alanine is a small non-essential amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a buffering agent and to improve the feel of formulations. |
| Glycine Amino acid / humectant | Glycine is a small amino acid used in skincare as a humectant and conditioning agent, supporting skin hydration and acting as a building block for collagen and natural moisturizing factor. It is generally considered well-tolerated and is often included as part of moisturizing or barrier-support formulations. |
| Glutamic Acid Humectant / amino acid | Glutamic acid is a naturally occurring amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a pH adjuster and in some formulations to enhance moisturization. |
| Lysine HCl Conditioning/amino acid | Lysine HCl is the hydrochloride salt of the essential amino acid L-lysine, used in skincare primarily as a skin-conditioning and humectant agent that supports the skin's natural moisturizing factor and protein structure. It is generally considered a supportive formulation ingredient rather than a clinically proven active. |
| Threonine Amino acid / skin conditioning agent | Threonine is an essential amino acid used in skincare primarily as a humectant and skin-conditioning agent, helping support hydration and the skin's natural moisturizing factor. It is also a building block for proteins such as collagen and elastin. |
| Arginine Amino acid / pH adjuster & conditioning agent | Arginine is a basic amino acid used in skincare primarily as a pH buffer/neutralizer and humectant-like conditioning agent that supports skin hydration and barrier function. It is generally well tolerated and often paired with acidic ingredients to balance formulation pH. |
| Proline Amino acid / skin-conditioning agent | Proline is a non-essential amino acid and a key component of collagen, used in skincare as a humectant and skin-conditioning agent to support hydration and the skin barrier. It is generally well tolerated and often included in formulations for its moisturizing and structural-protein-supporting properties. |
| Alpha-Arbutin Key active Skin-brightening agent | Alpha arbutin is a naturally derived hydroquinone derivative that inhibits tyrosinase, reducing melanin production. It is used to address hyperpigmentation, dark spots, and uneven skin tone. |
| Phytosteryl/Octyldodecyl Lauroyl Glutamate Emollient / skin-conditioning agent | Phytosteryl/Octyldodecyl Lauroyl Glutamate is a lipid-based ester derived from amino acids, plant sterols, and fatty alcohols used to soften skin, support the lipid barrier, and improve texture in emulsions. It functions as an emollient and skin-conditioning agent rather than a therapeutic active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Ceramide EOP Skin barrier lipid | Ceramide EOP is a long-chain omega-hydroxy ceramide that helps form and maintain the skin's lipid barrier, supporting moisture retention and reducing transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations. |
| Ceramide NP Skin-barrier replenishing lipid / emollient | Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Ceramide AP Skin barrier lipid / moisturizer | Ceramide AP (ceramide 6-II) is a naturally occurring sphingolipid that helps restore and maintain the skin's barrier function and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations, often combined with other ceramides, cholesterol, and fatty acids. |
| Behenic Acid Emollient/thickener | Behenic acid is a long-chain saturated fatty acid (C22) used in skincare as an emollient, thickening agent, and emulsion stabilizer to improve texture and provide a smooth, conditioning feel. It is derived from plant oils such as rapeseed and peanut oil. |
| Polyglyceryl-10 Stearate Emulsifier | Polyglyceryl-10 Stearate is a non-ionic emulsifier and surfactant derived from polyglycerol and stearic acid, used to blend oil and water phases and stabilize emulsions in skincare formulations. It is valued for its mildness and is common in formulations marketed as gentle or PEG-free. |
| Polyglyceryl-6 Behenate Emulsifier / surfactant | Polyglyceryl-6 Behenate is a non-ionic emulsifier derived from glycerin and behenic acid, used to stabilize oil-in-water emulsions and improve texture in creams and lotions. It functions as a formulation aid rather than a skin-treatment active. |
| Lactic Acid Key active Chemical exfoliant (AHA) | Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations. |
| Ectoin Key active Protective osmolyte / humectant | Ectoin is a naturally derived amino acid derivative (extremolyte) that stabilizes proteins and cell membranes, helping skin retain moisture and resist environmental stressors such as UV radiation and pollution. It is used in skincare for hydration, barrier support, and soothing of irritated or sensitive skin. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Palmitoyl Tripeptide-1 Key active Signal peptide / anti-aging active | Palmitoyl Tripeptide-1 is a synthetic palmitoylated peptide (sequence Gly-His-Lys) used in cosmetics to signal fibroblasts and support collagen and extracellular matrix synthesis. It is commonly combined with other peptides in anti-aging and firming formulations. |
| Palmitoyl Tetrapeptide-7 Key active Anti-aging signal peptide | Palmitoyl Tetrapeptide-7 is a palmitoylated synthetic peptide used in cosmetic formulations, primarily marketed to help reduce inflammatory signaling and support a more even, firmer skin appearance. It is commonly paired with other peptides such as Palmitoyl Tripeptide-1 in anti-aging products. |
| Lactococcus Ferment Lysate Key active Probiotic-derived skin conditioning agent | Lactococcus Ferment Lysate is a postbiotic ingredient produced from the lysate of Lactococcus bacteria fermentation, used in skincare to support the skin barrier, microbiome balance, and skin renewal. It is valued for its conditioning and soothing properties. |
| Vaccinium Corymbosum Fruit Extract Key active Antioxidant | Vaccinium Corymbosum (blueberry) Fruit Extract is derived from highbush blueberries and is used in topical formulations primarily for its antioxidant properties, owing to its content of anthocyanins, flavonoids, and vitamins. It is included to help protect skin from oxidative stress and provide soothing or conditioning benefits. |
| Oryza Sativa Extract Key active Antioxidant / skin conditioning | Oryza Sativa (rice) Extract is derived from rice and used in skincare for its antioxidant, soothing, and brightening properties, often attributed to ferulic acid, vitamin E, and gamma-oryzanol content. It is commonly included to support skin hydration and protect against environmental oxidative stress. |
| Saccharomyces Ferment Lysate Filtrate Key active Conditioning/antioxidant active | Saccharomyces Ferment Lysate Filtrate is a yeast-derived fermentation ingredient containing amino acids, peptides, vitamins, and minerals, used in skincare to support skin conditioning, hydration, and antioxidant activity. It is valued for potentially improving skin barrier function and radiance. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Gardenia Blue Natural colorant | Gardenia Blue is a plant-derived pigment obtained from the fruit of Gardenia jasminoides, used to impart blue coloration in cosmetic and personal care formulations. It serves an aesthetic role rather than providing a therapeutic skin benefit. |
| Maltodextrin Carrier/film-forming agent | Maltodextrin is a polysaccharide derived from starch hydrolysis, used in skincare primarily as a carrier, bulking agent, film former, and stabilizer for active ingredients and powders. It also helps improve texture and can act as a mild thickening or emulsion-stabilizing aid. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.